xboxscene.org forums

OG Xbox Forums => Modchip Forums => Matrix & Chameleon Modchips => Topic started by: senator on March 21, 2003, 10:18:00 PM

Title: How The Heck?
Post by: senator on March 21, 2003, 10:18:00 PM

If you got ver 1.1 that usually is what happens, line it up and try to boot it...

Title: How The Heck?
Post by: krash on March 21, 2003, 10:52:00 PM

will not boot get error 13 sometimes and error 14 sometimes

Title: How The Heck?
Post by: Novahux on March 22, 2003, 05:38:00 AM

Just bypass the alignment stage, enable the chip and have a crack at it.

Title: How The Heck?
Post by: myst1x on March 22, 2003, 11:46:00 AM

just put the chip in mode 2 and keep trying

Title: How The Heck?
Post by: krash on March 22, 2003, 05:19:00 PM

I really need help has anyone else had this prob? I cant seem to get it aligned tried for 4 hours. thought it was supposed to be easy? all i get is green for a sec then red. if I put it in mode 2,3,or 4 it is green but will not boot cdrw slayer 2.0 ?
P L E A S E      H E L P   ! ! ! ! ! !

Title: How The Heck?
Post by: myst1x on March 22, 2003, 07:10:00 PM

QUOTE (krash @ Mar 23 2003, 02:19 AM)

if I put it in mode 2,3,or 4 it is green but will not boot cdrw slayer 2.0 ?

try burning it to a different brand of CD-RW...i have found that Imation and TDK both work flawlessly in a Thomson and Philips DVD drive.

Title: How The Heck?
Post by: krash on March 22, 2003, 07:59:00 PM

the cdrw works we put it in a freinds xbox loaded fine?

Title: How The Heck?
Post by: Novahux on March 22, 2003, 08:10:00 PM

DON'T try and align a chip and boot to evox @ the same time you crazy knut.

use a fiberglass pen (or extremely fine sand paper) on the mobo, where the pogos touch.

Get the xbox to boot normally to the M$ dash before you worry about evox/slayer.

Title: How The Heck?
Post by: MrWizdumb on March 22, 2003, 09:52:00 PM

Title: How The Heck?
Post by: leethedeuce on March 25, 2003, 07:25:00 PM

Hi,

Me and 2 of my friends have done it to mine, and we ruined 1 xbox in the process so we have alot of experience, it does take time and patience to get it aligned. whenever it blinks to red it means bad, as usual. so you got to get it aligned better. i have had mine going for a while originally with the 8 gig hard drive. Now with an 80 gb. works great sometimes it will boot to old bios and say there is a problem. i use a little finesse and it works fine. seems this is do to the screw comin loose, and i here it can be fixed with havin another washer.