xboxscene.org forums

OG Xbox Forums => Modchip Forums => Matrix & Chameleon Modchips => Topic started by: SpankMan on January 25, 2003, 12:48:00 PM

Title: Xbox Resetting Itself With Matrix...
Post by: SpankMan on January 25, 2003, 12:48:00 PM
You have a bad LPC contact. Clean LPC contacts with some rubbing alcohol.
Title: Xbox Resetting Itself With Matrix...
Post by: limbfilter on January 25, 2003, 12:55:00 PM
what did you flash it with?
Title: Xbox Resetting Itself With Matrix...
Post by: MorfiusX on January 25, 2003, 01:17:00 PM
alignment problem 100%
Title: Xbox Resetting Itself With Matrix...
Post by: jujupinto85 on January 25, 2003, 02:24:00 PM
lpc points are those big points which are all in a row,

d0 is the only other point, its kindo that lonly one

lpc points just need to be religned better
Title: Xbox Resetting Itself With Matrix...
Post by: MrWizdumb on January 25, 2003, 03:43:00 PM
biggrin.gif give it a try ph34r.gif
Title: Xbox Resetting Itself With Matrix...
Post by: UrbelT on February 01, 2003, 02:45:00 PM
Still not working, maybe someone could draw me a pic of what exactly I need to solder, all my LPC holes are filled and were filled when I opened my xbox but yet it still shuts off 3 times then hangs... if anyone has any pics of what exactly I need to adjust that would be great.

Thanks
-UrbelT
Title: Xbox Resetting Itself With Matrix...
Post by: Tripamang on February 01, 2003, 09:06:00 PM
So it's coming up aligned?

It really sounds like the the d0 point has a good connection and one of the LPC points has a problem, maybe one of the LPC points got bridged when you filled them in? They're not properly cleaned off? Try using a piece of kleenex on the pogo pins and on the motherboard.

Dunno other than that unless you took a pic of your MB i couldn't be much more help =/
Title: Xbox Resetting Itself With Matrix...
Post by: XbOxGoD on February 03, 2003, 05:47:00 AM
reflash the chip, and re-allign.

it's nothing to do with his lpc points being bridged as he clearly states they were filled in anyway.
Title: Xbox Resetting Itself With Matrix...
Post by: cannondale on April 12, 2003, 11:10:00 PM
Had the same problem when trying the evox 3.6 bios. Then realized that that version only works with the Xbox 1.1, but I have a 1.0.  So I tried it with evox 2.6, which worked just fine.