xboxscene.org forums

OG Xbox Forums => Modchip Forums => Matrix & Chameleon Modchips => Topic started by: jsm on January 18, 2003, 05:37:00 PM

Title: Can't Prog. My Matrix. Want To Buy
Post by: jsm on January 18, 2003, 05:37:00 PM
what's the problem with it?
Title: Can't Prog. My Matrix. Want To Buy
Post by: JohnyBlaze on January 18, 2003, 08:05:00 PM
I got the Matrix and it was all a hassle at first too.  It kept saying unable to erase chip when I tried to flash that joint.  The trick is to pinch the mod chip to the programmer when you are programming it and do it until it finishes.  It works well liek that.  I tried to flash mine with evox 2.6, and the xbox rebooted 3 times and didnt work.  Eventually I said fuck it and flashed it with e2 4974 and it works.
Title: Can't Prog. My Matrix. Want To Buy
Post by: jujupinto85 on January 18, 2003, 09:55:00 PM
i can flash it for you for hmmm 50 bucks.. lol jk

i d do it for 5 or even 2 lol

just supply the bios and your game
Title: Can't Prog. My Matrix. Want To Buy
Post by: LepPpeR on January 18, 2003, 09:57:00 PM
Gotta pinch the connection bro - You cannot let it go until you have completely flashed also, you might want to try different PC's for some odd reason people have gotten theirs to work this way.

Good Luck

LepPpeR
Title: Can't Prog. My Matrix. Want To Buy
Post by: KazuyaWaruasobi on January 18, 2003, 10:01:00 PM
Yeah. Pinch it. I can usually let it go once it startes though. Also, make sur no cables are touching the chip and programmer while it fashes. It can move the chip and screw up the programing.
Title: Can't Prog. My Matrix. Want To Buy
Post by: jujupinto85 on January 18, 2003, 10:05:00 PM
pinching, even though sound risky does work, though i have to hold the pinch trhough out the flash, it works.. and thats what is important
Title: Can't Prog. My Matrix. Want To Buy
Post by: Darsven on January 19, 2003, 02:37:00 PM
wink.gif
Title: Can't Prog. My Matrix. Want To Buy
Post by: Darsven on January 19, 2003, 02:38:00 PM
And make SURE you are in flash mode . Dipswitches 1/2 @ OFF/OFF
Title: Can't Prog. My Matrix. Want To Buy
Post by: skullcrusher on January 19, 2003, 03:04:00 PM
QUOTE (Darsven @ Jan 19 2003, 09:38 PM)
And make SURE you are in flash mode . Dipswitches 1/2 @ OFF/OFF

When using the programmer with a PC to flash the Matrix chip, the DIP settings do not matter as the flash programmer works whichever mode your Matrix is in.

The flash option on the chip is to allow software flashing via EvoX etc.

And I also have to hold the chip to the programmer throughout the entire flash process, however it is a little easier for me since I have always used a parallel extension cable to flash my mod and not had any other probs.

Regards

SkullCrusher