xboxscene.org forums

OG Xbox Forums => Modchip Forums => Matrix & Chameleon Modchips => Topic started by: wildemu on January 16, 2003, 02:00:00 PM

Title: Hey Guys Plz Help
Post by: wildemu on January 16, 2003, 02:00:00 PM

bump.. plz help me

Title: Hey Guys Plz Help
Post by: Knuck3ls on January 16, 2003, 02:06:00 PM

First of all, SEARCH!


But, take the chip out and clean the LPC points with some rubbing alchohol and realign, should help.

Oh, and Mode 2 is ALWAYS green, mode 1 = test mode.

Title: Hey Guys Plz Help
Post by: Knuck3ls on January 17, 2003, 08:54:00 AM

If you have mode 3 on then yes.

Title: Hey Guys Plz Help
Post by: darylzero on January 17, 2003, 02:14:00 PM

Screw down your Matrix chip with a #6 x 1/2 screw.  Your screw is loosening a little bit.  The same thing happened to me after a few months.  I replaced the original screw with the above one and haven't had a problem since.

Title: Hey Guys Plz Help
Post by: darylzero on January 17, 2003, 02:46:00 PM

My chip was lighting green too.  It will light green even if it is not down all the way.

Trust me I loaded to the MS dash every time with the light on the Matrtix green.  I would turn it off and on and every 1 out of like 5 times it would load my colormod bios.  I replaced the screw and all has been well.

Title: Hey Guys Plz Help
Post by: Knuck3ls on January 17, 2003, 03:54:00 PM

MODE 2 AND MODE 3 ARE ALWAYS A SOLID GREEN! (Except when you eject in mode 3 and it goes red)

BAH! Why does no one know this? Of course if you turn the Xbox sideways to look in you will see that color!