Post by: bagel5009 on January 01, 2003, 12:56:00 PM
Post by: bagel5009 on January 01, 2003, 01:21:00 PM
so........
Post by: crackz0r on January 01, 2003, 01:44:00 PM
| QUOTE (bagel5009 @ Jan 1 2003, 09:21 PM) |
| the lite is on and it detects it so........ |
so nothing. do what the man said to do! 99% of the time this is the problem with matrix's.. just pinch the damn thing and get it over with.
Post by: Potenza on January 01, 2003, 03:15:00 PM
| QUOTE (bagel5009 @ Jan 1 2003, 07:56 PM) |
| I put the matrix w/ the programmer, w/ the 9v and i go to flash it w/ WinLpc, i go to program, and they yes to verify and select the bios and it says error erasing the chip, im like wtf? So i asked Satan00 and he said to put it in mode 4 and it did the same thing, the program detects the chip, and it says error erasing the chip, i try xodus-matrix flash pack and do everything it says and it says bad command or file name i know what i am putting is rite. pls help me!!!!!!!!!!!!!!!!!!!!!! |
If you are using Win XP,
There is a little proggie called "get io" or something.
I had the same prob as you,installed yhis program, squeezed everithing thight and away it went.
Post by: regulater7 on January 01, 2003, 10:26:00 PM
try 98, and intel board... or atleast xp + patch, and intel board.
Post by: Knuck3ls on January 01, 2003, 10:43:00 PM
And yes I know what you would have to go through for the Cheapmod, but still, for $50 it should work like a charm..
Post by: majik655 on January 02, 2003, 01:04:00 AM
either it needs to be totally flat ... not tilted..
or it needs to be like tilted a little..
make sure NO cords are laying on the programmer from like your keyboard or anything.
and also make sure your programmer is plugged in straight also
some of them are a bitch.. try pinching the connection while you tell it to program. (if you can reach it and do that at same time.,)
Post by: Nakor on January 02, 2003, 01:14:00 AM