xboxscene.org forums

OG Xbox Forums => Modchip Forums => Matrix & Chameleon Modchips => Topic started by: F-Forward on December 20, 2002, 01:20:00 AM

Title: Matrix Problem
Post by: F-Forward on December 20, 2002, 01:20:00 AM

If you have been here for so long you should know that the reboots means that the chip still isn't correctly aligned.

Anyway, if you use the "validate" or whats it called in the Flas-program, you can be almost positive that the flash went ok!

So go on, try to re-align again! (Green in mode 1 only means that the G-spot is correctly aligned, but not neccesary the others)

//F-F

Title: Matrix Problem
Post by: limbfilter on December 20, 2002, 08:39:00 AM

Right. Veryify your flash and try to realign.

Title: Matrix Problem
Post by: goretv on December 20, 2002, 12:32:00 PM

i actually do use verify after every flash, good to know that the flash went okay then. but how exactly will i know if it's aligned correctly?

anyways, i'm gonna go try messing with the alignment and see if i can get it working.

Title: Matrix Problem
Post by: limbfilter on December 20, 2002, 01:22:00 PM

Well...there's more to aligning than just rotating the chip....because of the space the screw creates, you can move it up, down, left, or right...Hope that makes sense.

Title: Matrix Problem
Post by: goretv on December 20, 2002, 01:26:00 PM

just got it aligned and working. took quite some time to put that thing in the correct place, but glad to see that it's working and playing those princo dvd-rs and rws. thanks a lot for your help.

i guess now i'm gonna need to go buy lots of dvd-rs.

Title: Matrix Problem
Post by: limbfilter on December 20, 2002, 02:03:00 PM