Post by: ..::Macro::.. on February 12, 2004, 04:12:00 AM
Thank you!
Post by: ..::Macro::.. on February 12, 2004, 05:03:00 AM
Post by: Chancer on February 12, 2004, 05:04:00 AM
Post by: ..::Macro::.. on February 12, 2004, 05:59:00 AM
And they're kind of expensive in our country!
Post by: Chancer on February 12, 2004, 07:05:00 AM
Post by: ..::Macro::.. on February 12, 2004, 10:49:00 AM
Here are the pics of my mod chip! I didn't install it! Is it possible to get it off?
Post by: anu|b|iss on February 12, 2004, 11:23:00 AM
Post by: ..::Macro::.. on February 12, 2004, 11:40:00 AM
Post by: pc2xbox on February 12, 2004, 01:54:00 PM
Once you get the Xbox back to normal again read about exploits if you already haven't and try that.
If you want to buy a new chip, depending on how the installer installed it, it should be easy to remove. If they used pin headers then you just need to unsolder the actuall wires going to the chip and it will unplug from the board easily. Hope that helps
Post by: Chancer on February 13, 2004, 04:07:00 AM
| QUOTE |
| it should be easy to remove. If they used pin headers then you just need to unsolder the actuall wires going to the chip and it will unplug from the board easily |
Scroll back up and have alook at the pictures Oh Dear.
Was the chip ever working? Did you change your HDD at the same time as install?
Did it only go wrong when you flashed it? If it worked until you flashed it the flash did not work right and the chip will have to be re-flashed anyway then you will need to sort out whatever you have done since ie something with the HDD
Post by: ..::Macro::.. on February 13, 2004, 04:07:00 AM
Yes i did a backup a month ago! I have the code! But the problem is that i didn't use the retail hdd, i used a 120 gig WD! I will try with the retail!
Now...the chip is soldered on very bad...amateur like! I will try to get it off...but the main problem is that it's is soldered on the mainboard and if i spill some solder on the borard...then it will suck!
First i will cut the DO point wire and see if the xbox isn't broken! Then i will try to unsolder the chip!
Post by: ..::Macro::.. on February 13, 2004, 04:14:00 AM
| QUOTE (Chancer @ Feb 13 2004, 02:07 PM) | ||
If you had that professionally installed I would let someone else remove the chip and fit a new one. The install is really poor no wonder you have problems
Scroll back up and have alook at the pictures Oh Dear. Was the chip ever working? Did you change your HDD at the same time as install? Did it only go wrong when you flashed it? If it worked until you flashed it the flash did not work right and the chip will have to be re-flashed anyway then you will need to sort out whatever you have done since ie something with the HDD |
The chip was working all the time! It was allways on because it didn't work when it was off! The xbox was premodded and i had the chip installed when i got the xbox!
The hdd replacement was brilliant...no problems! I flashed it before with EvoX M7...and it worked!
Post by: ..::Macro::.. on February 13, 2004, 11:15:00 AM
and get a new one!The only thing that could screw up the thing is this: when i tried to turn the chip off(when the chip(not flashed) was working) the xbox gave me an error! Still don't know why! Noone knows exactly!
Could it be that the mainboard is broken and the chip magicaly repairs it?
Post by: Master-Chief on February 13, 2004, 12:07:00 PM
Post by: ..::Macro::.. on February 13, 2004, 12:15:00 PM
| QUOTE (Master-Chief @ Feb 13 2004, 10:07 PM) |
| Look.. error 6 is Cannot Unlock Hard drive.. that has NOTHING to do with the modchip. |
Yeah...i know that! But when i was using the retail hdd the chip-turned-off boot didn't work...gave me an error 16! Oh and btw...why can't the xbox unlock the hdd?
Post by: ..::Macro::.. on February 13, 2004, 11:36:00 PM
Post by: ..::Macro::.. on February 15, 2004, 12:44:00 AM
Post by: ..::Macro::.. on February 15, 2004, 06:08:00 AM