OG Xbox Forums => Hardware Forums => Xbox Case/Hardware modding => Topic started by: greengiant on January 15, 2004, 10:53:00 AM
Title: Xir Remote Issues
Post by: greengiant on January 15, 2004, 10:53:00 AM
This may be somewhat late, but if your still having problems Contact me.
I will be more than happy to replace it, if you havent already contacted me.
Title: Xir Remote Issues
Post by: Andy Holloway on January 15, 2004, 03:54:00 PM
some1 else had this prob not long ago, exactly the same situation and also i think twistedsymphony was having a fool around with this set up, and had the same result but couldnt figure out why this happened. hmm i spose this doesnt help at all but at least you know your not the only one
Title: Xir Remote Issues
Post by: hereticx on January 15, 2004, 04:55:00 PM
Greengiant, I have contacted you and sent it back, received replacement and it still behaves the same way. And thanks for the info Andy, good to know I'm not just a fluke when it comes to this problem.
Title: Xir Remote Issues
Post by: havocaose on January 15, 2004, 04:57:00 PM
lol andy take that out of your sig before you get crapped on
Title: Xir Remote Issues
Post by: Andy Holloway on January 15, 2004, 05:09:00 PM
QUOTE (havocaose @ Jan 16 2004, 02:21 AM)
lol andy take that out of your sig before you get crapped on
take what out of my sig?
Title: Xir Remote Issues
Post by: hereticx on September 21, 2003, 01:44:00 PM
I recently purchased the XIR Remote Mod and installed it last nite. I also integrated the MS DVD Dongle according to this tutorial and I have both the dongle and the XIR using the XIR's IR eye. Everything worked perfectly, the Xbox powered up with a push of the Display button, shutdown when I pushed 0, and when on the DVD dongle works perfectly, and shuts off when a controller is inserted into port 4. Today I try firing up the box with Display, and nothing. I manually turn it on, dongle still works, and it still shuts off with 0. I opened up the box and the power for the XIR hadn't moved. I tried reinserting the power every which way possible, making sure it's contacting the 3.3v standby and the 3.3v lines, and nothing. Somehow I lost the ability to power up the box, but I can still shut it down with the remote. Any help out there?
Title: Xir Remote Issues
Post by: Glycerine on September 21, 2003, 02:47:00 PM
Try pressing select?
Title: Xir Remote Issues
Post by: hereticx on September 21, 2003, 04:01:00 PM
No dice, neither select nor display work to power up the box.
Title: Xir Remote Issues
Post by: Heet on September 21, 2003, 04:19:00 PM
by the way you worded it, it sounded as tho you are using the XIR and dongle with only the XIR eye. Is that right? Didnt think that was possible so i must have misunderstood you. In other words, do you have both the dongle and Xir eye visible? Or did you as you say, integrate both by using only the xir eye as a reciever. Anyway, should work by pressing select, just keep checking the wiring. I have 3 of them and all work to a T.
Title: Xir Remote Issues
Post by: hereticx on September 21, 2003, 04:30:00 PM
I have both the dongle on the XIR using just the XIR's eye. So one IR Eye, 2 IR devices. It worked flawlessly last nite, then this morning it won't boot, but it shuts down. Checked all power wiring and nothing helps.
Title: Xir Remote Issues
Post by: -Gadget- on September 22, 2003, 04:44:00 AM
which 'eye' are you using the one from the DONGLE or the one from the XIR (thats supplied)
if u used the one supplied, did you reomove the exsisting one from the dongle (and put to one side)
If u used the one from the dongle then im amazed it ever switched on as its a5V IR reciver and standby voltage is 3v ..
either way say which one ya used.. Mick ..
Title: Xir Remote Issues
Post by: hereticx on September 22, 2003, 08:36:00 AM
I removed the dongles eye, and am using the XIR's eye to send signal to both the dongle and the XIR.
Title: Xir Remote Issues
Post by: -Gadget- on September 22, 2003, 10:03:00 AM
ok, had a read of ya previous post ya said it stills switch's off ok .. and u are using the XIR eye ..
then what must of happerned is the 3v standby wire is some how disconnected ... this is the (from memory) 7'th wire down (top being the back of the xbox) well its the one after the ground which is black !!
Mick ..
Title: Xir Remote Issues
Post by: hereticx on September 22, 2003, 10:53:00 PM
I have power plugged into the purple (standby) and orange (3.3v) which the XIR's website says to have the power plugged into, yet still nothing. This is very confusing since by all means it should power up but doesn't.
Title: Xir Remote Issues
Post by: hereticx on September 24, 2003, 08:45:00 AM