xboxscene.org forums
OG Xbox Forums => Hardware Forums => Xbox Audio/Video Technical => Topic started by: Tombo1000 on August 13, 2005, 07:59:00 AM
-
it might be because it's set to ntsc in the region settings needs to be set to pal
-
Sounds like it's set to PAL and you connected it to an NTSC tv.
-
its a ntsc box, it has x3 menu... I am not sure where to change settings because it could be in Pal mode... SO how do i go about changing video settings?
-
If the problem is thats its set to a bad video mode, old black and white tv's and really old computer monitors with composite inputs are usually good at displaying a good enough picture to adjust the settings back to NTSC...
A quick note on that...these older displays usually have a "vertical hold" dial which is the key, check local second hand stores eg. savers, goodwill, thirft stores. You can get them next to nothing. I believe security monitors have this feature too.
Hope that helps!
-
I had a similar problem.
I originally thought the same thing *PAL v.s. NTSC*
Turned out the guy who modded it previous (a buddy) pulled up some traces near the d0 when he realized he put the d0 in the wrong spot.
After a while, I got the crap to fix it (xatco knife & conductive paint) - and its working.
... Just an idea if the *PAL v.s. NTSC* deal dosen't work - check the traces etc.
-
accid. 2x post.
-
No idea now...
So the box WAS working after I fixed thoes traces, now its not...
Anyone with ANY ideas at all reply - any help is much appreciated.
note: no cable, ntsc v.s. pal etc. problems. Not an old tv.