xboxscene.org forums

OG Xbox Forums => Hardware Forums => Xbox Audio/Video Technical => Topic started by: snaveint on January 30, 2004, 04:22:00 AM

Title: No Audio Or Video!
Post by: snaveint on January 30, 2004, 04:22:00 AM

i have the same problem right now! arrgh id love a response on what to do... this happend to me, after i was installing XBMP on my xbox, and playing a vid on it.. when i was done i turned it off now when i turn it off theres no signal, but the dvd and hdd work i ca hear it and i can eject with no problems, i can also log onto the xbox through FXP... argh!!

Title: No Audio Or Video!
Post by: snaveint on January 30, 2004, 04:53:00 AM

i fixed it!

firstly.. go and download

enigmah video switcher

try a google.com
if u cant find it PM me
or email me at [email protected] i'll send it to you

then extract the iso...
add a big file (any big file just so that it makes it easier for xbox to read)
recreate the iso (i used Xiso :S)

then burn it
put the disc into xbox

wait a bit to load it up
push B for NTSC-M
push A for PAL

reboot it and wala!

yay!!

Title: No Audio Or Video!
Post by: cyberstven on January 31, 2004, 08:10:00 AM

Hey, I used that program and it worked great!  Thanks a lot!

Title: No Audio Or Video!
Post by: Stickan on January 31, 2004, 11:47:00 AM

hey! i have the simliar problem.. after playing around with PAL and NTSC in XBMP my xbox is not starting up.. (i have a NTSC-J in Europe).. Hope this enigmah video switcher will help me too..

Title: No Audio Or Video!
Post by: Stickan on January 31, 2004, 12:20:00 PM

It worked for me as well! Thanks a bunch!

Title: No Audio Or Video!
Post by: cyberstven on February 01, 2004, 12:40:00 PM

They should post a sticky on this because its been a big problem.

Title: No Audio Or Video!
Post by: klnyc on February 04, 2004, 06:15:00 AM

Ooooooh crap, every one got it fix.  I CANT wait till I go home tonight and try this Enigmah switcher. I have the same problem like you guys had.  My has picture and sound,but the video output is skipping(like an old black and white tv that is broken)
So, I will  need a dummy file in the dvd/cdrw also?

Title: No Audio Or Video!
Post by: klnyc on February 04, 2004, 04:16:00 PM

Woohoo, Enigmah rock.  It was the region was messing me up.  It was set at PAL instead of NTSC-M

Title: No Audio Or Video!
Post by: jcfromkc on February 07, 2004, 12:26:00 PM

Thanks guys..

I was having the same prob.

This works great..

You gotta pin this.

Title: No Audio Or Video!
Post by: jcfromkc on February 09, 2004, 02:03:00 PM

I made a boot disk with the Video Selector program on it. I only put the Video Selector program on the disk. I booted the XBOX up, and I could hear the CD spinning, and I noticed that the XBOX wasnt trying to keep re-booting itself. So I just pressed the B button, and then turned the XBOX off. It came on, and now the video is back.

I did the same thing, I messed up the setting in the XBMP.

Try differ disks, or diff burning programs, this program is a life saver, and it will work for you.

Title: No Audio Or Video!
Post by: xbox_friend on February 11, 2004, 06:24:00 PM

konstrain--- did you ever get this issue fixed..??? I've been working on it for the last few hours now, to no avail...

Title: No Audio Or Video!
Post by: konstrain on February 11, 2004, 08:37:00 PM

QUOTE (xbox_friend @ Feb 12 2004, 04:24 AM)

konstrain--- did you ever get this issue fixed..??? I've been working on it for the last few hours now, to no avail...

what methods have you tried so far?

Title: No Audio Or Video!
Post by: xbox_friend on February 12, 2004, 03:19:00 AM

FINALLY got it working... I finally got my video back and I had sound (temporarily), until I put the cover back on my xbox...  I'm guessing I might have pinched some wires or something (any ideas)... but, the fix was to re-flash the EEPROM.. Legal EEPROM Flash.

It was a pain, considering I have the Matrix, but got it done, then reflashed the chip to X2 4977, and everything (minus sound), is working great!

Title: No Audio Or Video!
Post by: Vinvin on February 24, 2004, 05:05:00 PM

the video selector is really good.. help me wif a lot of problems..
thanx a mil..

Title: No Audio Or Video!
Post by: IDDQD on February 26, 2004, 07:14:00 PM

OH GOD IT WORKS THANK YOU SO MUCH!

Title: No Audio Or Video!
Post by: JudoChinX on February 29, 2004, 08:05:00 AM

having same problem. Ill try to fix it and get back with everyone.

Title: No Audio Or Video!
Post by: JudoChinX on February 29, 2004, 10:39:00 AM

I made the iso, and tested it on a samsung clad xbox, and the program was functional, but when we tried it on the phillips drive (with the messed xbox) nothing happaned except a beeping noise from the dvd rom. Is the xbox having problems reading the rw? should I swap out dvd roms?

Title: No Audio Or Video!
Post by: JudoChinX on March 02, 2004, 12:14:00 PM

Ok, I got things sorted out. Thanks a ton!

Title: No Audio Or Video!
Post by: luvaboi217 on March 05, 2004, 09:07:00 AM

i had the EXACT problem, I should have checked on here first.  I was resoldering and checking everything! that ended up not even being the problem.  I dont know what i'd do with out people on the net helping me out.  Thanks

Title: No Audio Or Video!
Post by: masomura on March 07, 2004, 02:27:00 AM

QUOTE (xbox_friend @ Feb 12 2004, 01:19 PM)

FINALLY got it working... I finally got my video back and I had sound (temporarily), until I put the cover back on my xbox...  I'm guessing I might have pinched some wires or something (any ideas)... but, the fix was to re-flash the EEPROM.. Legal EEPROM Flash. It was a pain, considering I have the Matrix, but got it done, then reflashed the chip to X2 4977, and everything (minus sound), is working great!

Thanks man    

Title: No Audio Or Video!
Post by: andjelko on March 17, 2004, 10:06:00 PM

Is there anyway to apply this fix on an unmodded xbox.  If no, can the box be modded in this condition.

Title: No Audio Or Video!
Post by: dr.strangelove on March 26, 2004, 09:01:00 PM

QUOTE (snaveint @ Jan 30 2004, 02:53 PM)

i fixed it! firstly.. go and download enigmah video switcher try a google.com if u cant find it PM me or email me at [email protected] i'll send it to you then extract the iso... add a big file (any big file just so that it makes it easier for xbox to read) recreate the iso (i used Xiso :S) then burn it put the disc into xbox wait a bit to load it up push B for NTSC-M push A for PAL reboot it and wala! yay!!

I followed those instructions to the letter. Before I did, my Xbox was playing the startup audio, but not video. After I ran the video switcher and rebooted, still no video, and now I get green/red flashing on the power LED. Any ideas?