xboxscene.org forums

OG Xbox Forums => Hardware Forums => Xbox Audio/Video Technical => Topic started by: {{DEMON}} on January 27, 2004, 05:41:00 PM

Title: Combining 4 Output Signals To Form A Splitscreen
Post by: {{DEMON}} on January 27, 2004, 05:41:00 PM

only if his projector has 4 inputs and is capable of displaying all 4 inputs at one time.
{DEMON}

Title: Combining 4 Output Signals To Form A Splitscreen
Post by: Blaine3119 on January 27, 2004, 05:47:00 PM

Just a thought, but I install camera systems and you can buy a quad switcher which has 4 inputs, 1 output. It can be set to display all 4 inputs on the monitor at once or switch to 1 input at a time, that might just work for you.  The only other thing you would need is a s video or composite video to BNC adapter.

Title: Combining 4 Output Signals To Form A Splitscreen
Post by: Ben999_ on January 28, 2004, 12:16:00 PM

that would be so awesome.

Title: Combining 4 Output Signals To Form A Splitscreen
Post by: spillage on January 28, 2004, 02:05:00 PM

I reckon a CCTV combiner would work too. However most cheap ones are probably only good for low res and may force the date time crap on screen.

Title: Combining 4 Output Signals To Form A Splitscreen
Post by: Blaine3119 on January 28, 2004, 03:10:00 PM

The cheap ones are 380 lines resolution, and the time and date crap is placed on the screen by the time lapsed vcr, so you would not have to worry about that.