| QUOTE (XLNC @ Feb 8 2004, 06:30 PM) |
| Tese Evox trainers are shit! They don't work at all, I tried the true crime trainer and nothing happened. |
I havent had one fail yet.
This post has been edited by heinrich: Feb 9 2004, 07:41 PM
I've got the PAL version of the trainer for True Crime which is also PAL. I've enabled TSR and also IGR but it doesn't work. The game doesn't start up.
trainers rock!!!!
can't seem to get my trainers to work either....all .etm files are in my c:/trainres folder. TSR Normal...IGR Yes
am i missing something else?
turned all of them on....saved and then exit....help...anyone!!!
The most common problem seems to be with using the wrong version of the game with the trainer. The other problem people seem to run into is they turn on tsr, but don't reboot, and then say the trainers don't work. If you could either start a thread listing what you've tried, or send me the list in a pm I'll try and assist you in diagnosing the problem if you have followed the guide in this thread. (this goes for anyone)
maybe they r activating it wrong... u guys that r having problems .. do you have ur chips on.. is the game on ur HD??
Ok cant seem to get kill.switch to work. 4981.06 on a 2.3B Pro with a locked 200 Gig. Maxtor with 3935 and TSR set to normal and IGR on. Rebooted even powerd off and let it sit for a minute still nothing. Is it the bios do I need to use M7 (team EvoX's bios)?
Did you go into the trainer menu and turn the game options on? :)
I havent got anything on my menu or config file for trainers, I've got the menu on my C: but thats about it, how do I edit it into the evox.ini file?
Im using Evox +3921
Topper upgrade to 3935.
dootdoo what is the game options dont recall seing it
This post has been edited by ComputerDude5565: Feb 26 2004, 07:15 PM
About the TSR and IGR thing:
I dont have a TSR but a TSR_type listed in my .ini (yes I have the latest verson). Anyways here is what it says:
TSR_Type = 0
IGR = YES
Now I changed the IGR to yes, but I am not sure what to do with the TSR. Do I add that value? Do I change TSR_Type to 1 or yes?
EDIT: Sorry, Wrong Post
This post has been edited by JusKickNit: Mar 6 2004, 10:38 AM
Same thing here
Using
1) evox dashboard 3935
2) TSOP evox bios 2.5y
3) TSR = normal
4) IGR=1
5) some trainers in c:\trainers
6) enabled all ninja gaiden options for example
7) Region: default
8) reboot xbox
9) play ninja gaiden (difference between warez or original version?)
10) effect NONE
Same for 007 everything or nothing
Seems to me that lots of people use these steps and it doesn't work.
If thats the case I rather use working released by the scene trainers
Otherwise make some damn better documentation and troubleshooting guide
same prob as fireone, no effect in ninja gaiden.... fuking hard ass game....
. Even though i dont need the trainer for NinjaGaiden I just tried it n-e-way just 2 c if it would work. My settings r as follows.
1. PBL 1.4 4979_BFM/4979.67 (X2) Switch installed.
2.Evox 3935+ (latest evox 
3.IGR=NO
4.TSR=Normal
5. Save & exit
I then went 2 the trainer screen & selected the options that i wanted. Then i saved & rebooted. It worked like a charm.
U can learn something from everybody.
Guy's i think its because you guys yell to much "help" instead of really trying.
Ok follow these steps:
1. TSR: Normal
2. Find out what game region your Xbox backup is, then go to the Settings menu and select the right region. For example - If the backup is an PAL and the trainer is NTSC and you turn all the stuff on(Money, infinite health) and then you go select the game and then you find out that it doesn't work, And you say "Hey TRAINERS ARE FUCKING crapzuiziet!".
You can find the region in the Video section in the video section there is something called Game Region instead of "default" switch it to what ever region the trainer is!(TIP: It is in the bottom).
I have done this and it has always worked.
* Remember (Put all your trainers in c:/trainer and only the .etm file. - I also put the .asm file in, but this is not necessary it is just the code).
what if i got a trainer like this one Ninja.Gaiden.Plus5.Trainer.XBOX-DNL..but this is to replace the default.xbe file and if i alreayd burnt my game..is there a way to change this into a evox trainer so i can upload the the hdd and use from there?
I don't think so. - Although you can get a Ninja Gaiden Trainer, i use one myself...
damn aiight..yeah i saw the evox trainer or ninja gaiden..but it's only a +3 one and it's different then the other one which is +5
| QUOTE (Rob1302 @ Mar 17 2004, 12:04 AM) |
| damn aiight..yeah i saw the evox trainer or ninja gaiden..but it's only a +3 one and it's different then the other one which is +5 |
You'll Probably have to burn it again with that .xbe if you really want to cheat with that file.
yewah damn that's not worth it hehe..k thanx
i can't seem to get this trainer to work..its the first time i'm working with evox trainers...
http://trainers.evol...ex.php?dlid=153
I got a NTSC/UC machine with Evox 3935
i have tried the following settings as per users of various forums..
TSR = DEBUG
IGR = Yes
Game Region = 2 (as trainer is NTSC / US)
or
TSR = NORMAL
IGR = No
Game Region = 2
still aint getting anything working..i'm still dying even though i have infinite health "ON" ...hmmm....stuck at the horse boss fustrating
bah
this is bull. I don't have a trainers menu. I'll go see how hard it is to update evox.
The one found on the evox page is a .emt and everyones saying replace the .xbe, well, where the hell is the xbe in the trainers :(?
Sadness :(
| QUOTE (swifferman @ Mar 18 2004, 07:41 AM) |
bah this is bull. I don't have a trainers menu. I'll go see how hard it is to update evox.
The one found on the evox page is a .emt and everyones saying replace the .xbe, well, where the hell is the xbe in the trainers ?
Sadness |
First there are 2 types of trainers being released.
Main stream trainers .. meaning REPLACING the XBE file ..
naming the trainer xbe file to default.xbe and RENAMING the game default.xbe to GAME.xbe ..
the second are EVOX TRAINERS ...(.ETM files) these trainers are to work ONLY with evox..and that is it. The newer versions of evox IF taken from the source..will have a Trainers folder on c: and a place in the ini file pointing to trainers..so it will show up in the menu... then select the option in the evox menu and it will list the .etm files you put in the trainers folder on the c:
Now there are good and bad things about the 2...
The mainstream ones you need to rename.. are cool.. but you must..
modify...and also alot of times because you rename the trainer to DEFAULT.XBE ..
dashboards look at this file for the NAME of the game... and will populate it in their games listing... however lets say DNL released the trainer.. it may say DNL GAMENAME TRAINER ... instead of just GAMENAME this may make you want to change the name of the trainer so that it will show the correct game name...etc etc.,.that is more modifying.
Evox.. on the other hand seems to give people problems.. with IGR ..TSR .. and different bios's being run...also it MAKES you HAVE to use evox as a dashboard to even run the trainer. the other ones will allow you to use ANY dashboard.
Now alot of people have or had problems running the etm files..including myself..
but I got them to work fine..
so here is what made mine work.. NO OTHER OPTION works for me besides these..
ASSUMING YOU HAVE DOWNLOADED THE CORRECT TRAINER BASED ON THE REGION OF THE GAME YOU ARE USING IT ON!!! meaning PAL trainer on PAL game NTSC on NTSC!! THIS IS A MUST! and is probably HALF of peoples problems.
Version 1.0
x2 4981 Bios TSOP FLASHED
evox 3935
TSR - NORMAL (I HAD TO TURN TO NORMAL I think it was off before)
IGR OFF (very wierd I assumed it needed to be on BUT MY BIOS HAS IT!
so I believe there was a conflict before when on.)
Hope this helps some people.
| QUOTE (majik655 @ Mar 20 2004, 07:10 AM) |
| QUOTE (swifferman @ Mar 18 2004, 07:41 AM) | bah this is bull. I don't have a trainers menu. I'll go see how hard it is to update evox.
The one found on the evox page is a .emt and everyones saying replace the .xbe, well, where the hell is the xbe in the trainers ?
Sadness |
First there are 2 types of trainers being released.
Main stream trainers .. meaning REPLACING the XBE file .. naming the trainer xbe file to default.xbe and RENAMING the game default.xbe to GAME.xbe ..
the second are EVOX TRAINERS ...(.ETM files) these trainers are to work ONLY with evox..and that is it. The newer versions of evox IF taken from the source..will have a Trainers folder on c: and a place in the ini file pointing to trainers..so it will show up in the menu... then select the option in the evox menu and it will list the .etm files you put in the trainers folder on the c:
Now there are good and bad things about the 2...
The mainstream ones you need to rename.. are cool.. but you must.. modify...and also alot of times because you rename the trainer to DEFAULT.XBE .. dashboards look at this file for the NAME of the game... and will populate it in their games listing... however lets say DNL released the trainer.. it may say DNL GAMENAME TRAINER ... instead of just GAMENAME this may make you want to change the name of the trainer so that it will show the correct game name...etc etc.,.that is more modifying.
Evox.. on the other hand seems to give people problems.. with IGR ..TSR .. and different bios's being run...also it MAKES you HAVE to use evox as a dashboard to even run the trainer. the other ones will allow you to use ANY dashboard.
Now alot of people have or had problems running the etm files..including myself.. but I got them to work fine.. so here is what made mine work.. NO OTHER OPTION works for me besides these..
ASSUMING YOU HAVE DOWNLOADED THE CORRECT TRAINER BASED ON THE REGION OF THE GAME YOU ARE USING IT ON!!! meaning PAL trainer on PAL game NTSC on NTSC!! THIS IS A MUST! and is probably HALF of peoples problems.
Version 1.0 x2 4981 Bios TSOP FLASHED
evox 3935 TSR - NORMAL (I HAD TO TURN TO NORMAL I think it was off before) IGR OFF (very wierd I assumed it needed to be on BUT MY BIOS HAS IT! so I believe there was a conflict before when on.)
Hope this helps some people.
|
i'm having the same bios & evox version as u..
doing the same thing even ntsc on ntsc doesn't work for me
IGR off or on doesn't make any difference either..its getting fustrating cos i'm stuck in ninja gaiden
| QUOTE (zoombee @ Mar 20 2004, 07:40 AM) |
i'm having the same bios & evox version as u..
doing the same thing even ntsc on ntsc doesn't work for me IGR off or on doesn't make any difference either..its getting fustrating cos i'm stuck in ninja gaiden |
Did EVOX even make a Ninja Gaiden trainer yet?
Also.. your last thread points to I-NINJA not ninja gaiden... (just making sure you are not thinking I-Ninja trainer is the Ninja Gaiden trainer)
| QUOTE |
i have tried the following settings as per users of various forums..
TSR = DEBUG IGR = Yes Game Region = 2 (as trainer is NTSC / US)
or
TSR = NORMAL IGR = No Game Region = 2 |
GAME REGION 2 ??? NTSC?? I believe NTSC is region 1 isn't it?
Just make sure your trainer is NTSC and your game region is the same.
I know there has been a "mainstream" one released where you rename the default.xbe file in the game to GAME and the trainer to default.xbe...
For those to work ... turn IGR OFF and TSR off
Maybe that will help...
I really do not know why so many people have problems... I have done this to many many machines and don't have any problems anymore...pretty strange there are sooo many differences.
This post has been edited by majik655: Mar 20 2004, 02:45 PM
sorry i meant the trainer for evox dashboard.
cannot seem to get that to work.
have u given it a try alreadY?
really been through so many possibilities still no good news....
| QUOTE (zoombee @ Mar 20 2004, 07:59 PM) |
sorry i meant the trainer for evox dashboard. cannot seem to get that to work.
have u given it a try alreadY?
really been through so many possibilities still no good news.... |
Well from what it looks like.. the trainer works but is I guess not as easy as just not dying.. you must use or buy unlimited elixor's etc etc.. to stay alive.. however whatever you purchase you must have the correct amount of money .. you can just purchase unlimited amounts of it.
Next .. it seems it messes up the game in chapter 13 if you use 2 of the options together... also if you have already played to that point where you cannot go any further.. then you must start over from last save.
I have not tried this trainer yet.. because I do not have the patience to see if it is working.. I don't know anything about the game.. and since it is free money type of trainer .. it would probably take a little bit of playing to figure out if it is working.
I would try a "easier" game.. meaning one that has a trainer like Invincibility.. and just turn that option on.. and see if you can get it working.. on ONE game..
such as state of emergency.. if you get one working.. then ALL should work.. and if they do not, then you know it is the trainer and not your box.
for game region can i put AUTO or do i have to put NTSC? i tried it with DEFAULT and it did not work.
EDIT: yaayy! i put it on NTSC and it works now.
good job mate
does the fact that the games are on the hardrive have anything to do with the trainers? and what if im using THC as my dash and i go into evox from there to use the trainers, is that a problem?
<_< I have just installed a new maxtor 200gb hard drive and have used slayers to install evox and reinstalled my c: and E: drive backups which had trainers in the listing before but now since I have done the upgrade and reinstalled the copied diretories and foldrs the way they were and to the same partition on the drive as before I now have no trainer tab to access them. They are in a folder on the c:\trainors just like always but can not access them. Help. Thanks
you need to upgrade evox/add Item "Trainers",ID_trainer to evox.ini.
Now for my question. All I see in the trainer option is "Sorry Trainers". The evox readme does not cover this issue. Do I need to upgrade my bios?
This post has been edited by Argoyle: May 5 2004, 01:51 AM
bah nvm, I'm dumb. I was supposed to put the trainers folder in C:/ but that was assuming that's where evox is, which it isn't for me. I moved it to my evox folder and it worked. yay.
i had the same damn problem for a some time now and i am following what you just did also.
i added a new folder called trainers and placed under c:. this is where the trainer.etm files go correct?
I am rebooting my xbox to seem if it takes affect. brb
ok after rebooting under my main menu i get Trainers, but accessing it displays nothing.
So i am at a stopping point and doing research on this.
any help would be great.
they are located down a ways on the trainers by pushing down on the dpad.
hidden so to speak but they are there.
i just got thses trainers to work, TSR = normal, IGR = OFF, Region = Auto
i just found this good site for trainers.....
http://trainers.maxc.....Trainer Files
Does the game have to be on the HD for the trainer to work?
i think you just have to launch the game from evox, so if u let the dash boot up, then insert the disc and select launch game, it should b ok, but i haven't personally tried it
If I don't have Debug TSR in my .ini, does that mean I have an umcompatible version of EvoX?
*edit* NM, wasn't current release...modified the .ini, blah blah blah, and problem fixed. I like the Ninja Gaiden trainer from DNL.
I have installed two trainers that I want to use in c:\trainers, but evox cant see them. Whats up?
I wouldn't know about the UDE release...just to be I'd recommend you download the current EvoX from xbins, release 3935, I'd also move the root folder for EvoX onto the C partition and make sure you backup your current DB. Since I'm still a noob and all that's really the only thing I can suggest atm.
That's just a suggestion, but that'd be the first thing I would do. I just had a problem error code 21 while going back to ms db...just reinstalled EvoX and C and E partition my system modder gave me as a backup. If you have a C/E partition backup, I'd suggest that too...but be cautious, the T and UDATA dirs will be replaced, erasing music up to a point, or if you didn't backup on the system itself (which I failed to do). If you haven't already, go to #xbins on EFnet
Ok Guysm nice thread....I now understand how the EvoX trainers works..but again just a simple stupid question:
"Do I have to copy the game in my HD? or will Evox Trainers works if i insert the game dvd and launch the game from the evox trainer menu????
Evox Trainers works if u insert the game dvd and launch the game from the evox trainer menu
| QUOTE (choleva @ Mar 14 2004, 08:03 PM) |
Guy's i think its because you guys yell to much "help" instead of really trying.
Ok follow these steps:
1. TSR: Normal
2. Find out what game region your Xbox backup is, then go to the Settings menu and select the right region. For example - If the backup is an PAL and the trainer is NTSC and you turn all the stuff on(Money, infinite health) and then you go select the game and then you find out that it doesn't work, And you say "Hey TRAINERS ARE FUCKING crapzuiziet!".
You can find the region in the Video section in the video section there is something called Game Region instead of "default" switch it to what ever region the trainer is!(TIP: It is in the bottom).
I have done this and it has always worked.
* Remember (Put all your trainers in c:/trainer and only the .etm file. - I also put the .asm file in, but this is not necessary it is just the code). |
The REGION thing worked!!!!
It was on default and it didnt work so I changed it to America...err USA whatever it is NTSC and it worked
My trainers only work when i select IGR ON
if i select OFF all the trainers dont work.
and the shit part is that many games need IGR OFF to work on the xbox hard disk.
that leaves me without trainers.
im using xecuter2 lite and formated the HD with slayers 2.5.
any idea how to fix this problem?
Does the dashboard have to be in C\ drive? I've moved mine to F: and i cant seem to get my trainers to work. I remember them working in C before but i'd rather not move it back there.
IGR - no
TSR - normal
When i try loading up a game, the dashboard just freezes at the loading screen and wont proceed. It loads up the other games i did not enable trainers just fine though.
It's funny that a Trainer guide for n00bs doesn't explain what trainers are
Can someone please explain, in plain english, wtf a trainer is?
cheats for games... its like a gameshark but free. you just turn the cheats on prior to playing the game, reboot, and bam, you have unlimited health, unlimited amo.. unlimited whatever!! get it?!
Lucied,
Your problem is that you are creating the 'Trainers' directory in the wrong place. Cretae it under E:\Dashboard\ instead. You will find that now it is working.
Ok, i read and re-read the entire thread in front of my xbox and cannot for the life of me figure out how to get the 'trainers' menu item in the dash...
Tried TSR and IGR setting combinations... no luck. checked evox.ini which says:
Section "Root"
{
# Item "Launch DVD",ID_Launch_DVD
# Item "Trainers",ID_trainer
and so on...
read EvolutionX..Id 3935.nfo which tells me
EvolutionX Main Features List ?
? ?
? - MS Dashboard Replacement ?
? - Build in FTP Server ?
? - Configurable Menu System ?
? - Flash BIOS utility ?
? - Upgrade Harddisk and Format/Partition easily ?
? - Create game backups ?
? - Build in Trainer menu system
and still no trainers menu.
Can someone please help?
In case it matters (it probably does) all the evox files are in C:/, and trainers are in C:/Trainers
Where can I put the IGR and TSR settings on? I cant find it anywhere... Because every trainer I tried until now didnt work.
| QUOTE (coxjon @ Oct 22 2004, 07:08 AM) |
Ok, i read and re-read the entire thread in front of my xbox and cannot for the life of me figure out how to get the 'trainers' menu item in the dash...
Tried TSR and IGR setting combinations... no luck. checked evox.ini which says:
Section "Root" { # Item "Launch DVD",ID_Launch_DVD # Item "Trainers",ID_trainer
|
Remove the # in front of the 'Item "Trainers",ID_trainer' tag and reboot. You should then see the Trainers option in your menu. Then read the rest of this thread.
Good Luck.
Wow I never knew there was this much information about how to get the trainers to work. I came in here hoping to fine out how to make the Evox Trainers. Anyone have a link where I could read up on this?
Thanks,
Kyle
k first i have a v1.6 with x3 and newest bios and evox. Whenever i ftp into my xbox i goto into the c: and there is no trainers folder anywhere. When i load into evox dash there's a trainers option with sorry trainers in it. I tried creating a folder named Trainers and put a couple in it but doesn't show up under sorry trainers. I could use a little help please
weird i thought i'd try making a folder called trainers again and it worked this time. Did the same thing as before.
Im havin the same problem wit halo 2 trainers... my evox didnt come witha trainers folder and i wrote one in and sent the files to the folder but when i run evox and open the trainers file its blank... this shit dont work... i was thinkin For the person whose Trainers work post up ur .Ini file and let some of us try that
QUOTE(THDVL @ Jan 25 2004, 05:47 PM)
I have igr and tsr both turned on.. my trainers in c:/trainers, i have them enabled and the cheats that i want enabled, but none of em seem to work. I cant figure out what i could be doing wrong. If anyone has any advice please let me know. -- not a noob just havin hell w/ trainers.
i got my trainer to work i love you guys its all with the settings. dont mess with evox.ini just use the settings
Do u have 2 have the game copied ova 2 ur hddd?
Hi, I'm an extreme noob when it comes to modding and all that. I had to take my xbox to a place to get a chip stuck in. I'll be getting a CD from my friend which has the evo-x dashboard in it, which'll install itself into my xbox (I'm not bothered to do the wiring thing just to save my save games and all that other crap, I just want to get the dashboard and I'll willingly start from scratch with my games) but I wanted to ask, how do I install trainers via use of CD's? Will I be able to access this C:/ thing, or will I need to do it using a PC? I want to just copy all the trainers that I get from the internet, including skins and whatnot, using a CD. Is that possible? If so, what are the steps to doing that? (and please do remember, I'm a noob, I went through a couple of previous posts on chips and bios and stuff and understood nothing)
I have an aladdin mod chip (after going through a couple of posts I realized there's more than one kind, but I don't know what kind I have, but I'm sure the dashboard should be able to install itself. My friend has an xecutor chip). I'll be installing the dashboard soon, but I want to know how to add trainers using CD's, and if its possible to update my dashboard using CD's (screw the save games, it's not like I won't replay the whole thing just to get there again).
Thanx in advance for any help.
ive got the trainers folder in my F; drive with evox in same place, now my folder has a few trainers in but when i select trainers from evox menu i get a "Sorry Trainers" meassge what does this mean?
stickied posts are supposed to be HeLPfuL
mods: you should weed out useless posts, and combine useful posts high up in the thread that way "noobs" or anyone else needn't spend hours reading through "me too" and "what about" and "edit oh I fixed it" posts.
this post itself is such an example but need not be merely deleted if the other thread housecleaning isn't done.
I think that the most overriding key to success to using trainers within evolution x is to modify the .ini file within your evolution x data files, to tsr type = 1 and enable igr, and save that .ini file. Then burn a new evolution x disk (I use a cd-rw for rewriteability) with these .ini changes. Boot the evolution x disk and those changes should be obvious in system utils and settings. Then enable the trainer and launch dvd. I think that a lot of the problems people are having with this subject is that they think they have made those changes but those changes revert to saved default upon reboot or launch. If you make these changes by going into evox settings and changing them with the controller on the xbox those changes will not be permanent enough for the trainers. Those changes will not be saved in other words. Those changes will not stick. Obviously this post is for people who are booting evox from cd instead of the hard drive but there might still be useful information here for those other users. Earlier today I couldn't get the trainers to work until my friend figured it out - make those changes above and you may very well be able to use trainers like I am now! Later!
Settings for Evox V3935
To use trainers youl need to change some settings in your "evox.ini" file
Default settings
TSR_Type = 0 "0 = Disabled 1 = Enabled 2 = Debug"
IGR = No "No = In game reset disabled Yes = In game reset enabled"
So lets see If we want to use trainers we first need to enable TSR_Type so set this too 1 and if you plan on makeing your own trainers youl need to set this too 2 and also set this to Yes
[Telnet]
Enable = No "No = Telnet disabled Yes = Telnet enabled"
IGR is not needed to use trainers this is to simply reset the xbox without haveing to get up and do it manualy.
Thats it if your still haveing problems and have your TSR_Type set too 1 or 2 then the problem is not with your evox.ini file its something else unless you modified your evox.ini file and mybe messed something up but if its the default settings then you should be fine.
hope this helps out those with the newest version of evox 3935
my halo 2 trainer worked fine, but then the other day i played co-op with my buddy, and the trainer didnt work in co-op, and now i cant get it to work at all, anyone know why?
i can see my trainer option and i made a folder in c: they dont work!! i have evox 3935 "a softmod"
I cant get it 2 work i got (evox):v+3935 its a softmod is that the problem
This might be a lame question but...
Can I run evox as a dash (acxtually an app through a dash) and not the bios and still use trainers?
Horse shoes...horse pants...is anybody listening to me?
Do I have to run the evox bios (i am running an x3 bios currently) to use trainers. I can't seem to get them to work trying all the tricks and tips you guys are suggesting.
Spanks a lot!
Wow, nobody knows the answer to this?
ARGHHH
Easiest solution i found is to update to Slayer's evox 2.6
I 95% guarantee it'll work
seems like everything in your setup is in order. i have the same settings, 'cept mine is NTSC and i haven't had a trainer not work yet. check your f: (or g:) drive and make sure there isn't another trainers folder. for some reason, the slayers 2.6 disk put a folder named trainers on each of those drives.
btw . . . where'd you score a forza trainer already?
Set IGR to No.
No trainers were working for me, i turned of the IGR's in my x3 bios, and the one in evox too, and it worked.
Found this guide:
Trainer Guide For Evox3935 (V2)
All I get is "Sorry Trainers" in the trainer menu. What's wrong?
OK, a trainer question that has NOT been asked yet!
I have an HDTV (Sony 42in LCD) & I have my xbox set up with csomponent cables. When I try to use trainers, it loads back to the evox menu. BUT, if I go into the MS Dash & put my video settings as Normal (instead of widescreen) & answer NO to 480p, 720p, & 1080i (instead of YES) it works perfect! Are Trainers compatible with HDTV output?
Thanks!
QUOTE(Jack Hallows @ Jun 23 2005, 08:58 PM)
Hi, I tried everything possible written in this topic, and I still can't get the Halo2 trainer to work. I have the latest Evox on my box (softmodded) but I nstalled it to E drive. But the trainers have to be on C drive correct? So I copied the trainers folder and put it in C drive, and nothing works. What am I doing wrong? :huh:
If you use Krayzies put it in E:/dashboard/Trainers/whetever.etm
For the halo2 trainer, if you did the update try the halo2 v1.1 trainer, "sorry trainers" means there is no trainers in folder, FTP them in there (unzipped). the Trainer folder goes where you evox dash is,if your evox is in C put there. TSR, iGR, and game region are all in the evox settings menu.
i have a copy of juiced here and was wondering how i can tell what format it is (NTSC-PAL etc) any info would be appreciated
how do you figure out whether your game is ntsc or pal? i have ninja gaiden original disc but it says neither on the cover , i dont have the box just the disc and it doesnt say pal or ntsc so i cant figure out what trainer to get.
Do you mean the C directory in the ftp list with C,D,F,E?
What do i upload the trainers folder or the files in the folder
What's IGR? There's no such thing in my EVOX options....And neither TSR, except it is TSR DEBUG.
How do I find out version of my EVOX?
Thanks.
Wow, after reading through that whole thread, I saw noone give this advice, as it was the first thing that was said to me when I first had trainer problems:
NO MORE THAN 1 TRAINER ENABLED AT ANY GIVEN TIME
Also, to all the people who say that if you change the settings in EvoX it won't stay that way unless you edit the ini file.... You're liars.... All you have to do is change what you want to, then either use the EvoX menu to reboot, or shutdown the Xbox.
That's what I've found in my many hours of trail and error testing. And I was just reading this thread wondering if anyone had any helpful hints on creating trainers before I create a program that should be a lifesaver to many trainer creators/wannabe's....
QUOTE(XLNC @ Feb 9 2004, 12:06 PM)

I've got the PAL version of the trainer for True Crime which is also PAL. I've enabled TSR and also IGR but it doesn't work. The game doesn't start up.
I have the same problem. People are too asinine to help or even answer. They just say Noob. When I'm definately not a newbie. God damn this is pissing me off. I'm trying to play Mortal Kombat Shaolin monks and getting the same problem. The game won't start.
Do u set TSR to Normel or Debug?
dont u have to rename the au to play trainers?
ex $u to $u2(thats wht i did)
TSR to normal.. what does that stand for trainers?
This post has been edited by Grim_reaper987: Dec 30 2005, 05:23 PM
[indent=1]Can you use evox trainers if you have evox as an app?
lool you lot make me laugh... i had the same problem, but i managed to get around it.
first off i dont even have evox as my dashboard, i have avaluanch all i did was put it on
my xbox and when to file manager and selected the actual .xbe anywhoo all i did was did
what this site says but there is also another option under "tv setting" i forget what it exactly
is but ill tell you soon. just change under where it says PAL in blue into NTSC (America)
and they worked.... every single one of them and yes including the halo 2 cheats...
well i hope this help, please post back and tell me if it did!
I dont have an trainers menu (IMG:style_emoticons/default/sad.gif) can any1 explain me how to get the trainers activated or this menu...
I am using evox v+3935
hi everybody
can anyone here give me a couple of site to DL trainers please
am new at this and i dont know where to find them
thank you
Frogman
QUOTE(frogman69 @ Mar 15 2006, 11:41 PM)

can anyone here give me a couple of site to DL trainers please
am new at this and i dont know where to find them
look for my other post in this forum or the first post where some asked the same question yesterday.
for some reason i cant create Trainers directory in my C: Drive, my evox dash version is +3935
1) check your other thread
2) use xored's trainer launcher instead
does the game your tryin to use a trainer on have to be played from the HD or can it be played from the disc(copy or original)?
either one.
Hey dude i can help you get past that boss use art of fire weels and then attack him takes his health down twice as quick i know i completed ninja gaiden with no cheats now im doing hard mode and im on rachels sister "Nightmare" hope this helps
How do you install the trainers?
read page one of this thread.
post 2.
number 2.
Thats what I have! Everything is isntalled and setup correctley but it jsut refuses to work in EvoX and xordes.
I get an orange light that I was told I was supposed to but then no effects happen.
What about you?
where is the settings menu in evox?
CODE
Item "Settings",ID_Settings
ok so i got the trainers menu to show up. but when i enable the trainers they dont take effect in the game. am i missing something???
QUOTE(ciscokidd73 @ Oct 9 2006, 08:54 PM)

ok so i got the trainers menu to show up. but when i enable the trainers they dont take effect in the game. am i missing something???
If I were you I'd get the Xored Mini ETM launcher 2.2 from maxconsole forums.
If using evox check the settings:
TSR - ON
IGR = Off
also try different games Not just the same one (some games have different versions)
i checked those settings.....didnt work. i must be missing something here.
QUOTE(ciscokidd73 @ Oct 12 2006, 10:16 PM)

i checked those settings.....didnt work. i must be missing something here.
QUOTE(chorizo1 @ Oct 10 2006, 01:49 PM)

1) If I were you I'd get the Xored Mini ETM launcher 2.2 from maxconsole forums.
2) did you try different games Not just the same one (some games have different versions)
I'm sorry if this is a dumb question. I was just wondering if there is a program that I can use to manage the trainers on my xbox from my pc. I have a lot of trainers on my xbox that I will likely never use, but many of them are not named by what the trainer is for. I would just delete them all and install the ones that I know I'll use, but that's more work then it's worth.
Could someone please point me in the right direction? I have done some searching but I've come up with nothing.
Like this?
That will work, Thanks.
OK guys, I have a problem here regarding trainers. I recently upgraded my HDD from retail 8GB to 80GB one and used AID v4.50 for formatting it, installing new dashboard and apps and stuff.
Now the C: drive is of 700MB with 339MB free and E: drive is of 5GB with all the apps and the XBMC dashboard installed on it. the F: drive is of 70GB and here is where the games are.
C drive is empty in a way as exploring it boXplorer shows these items only:
1. Audio
2. fonts
3. xboxdashdata.185eadd00
4. xodash
5. evoxdash.xbe
6. XBox Book.xtf
7. Xbox.xtf
8. xboxdash.xbe
There is no C:\Trainers or EvoX.ini for that matter. Is FTPing the XBOX to the PC is the only way to get the trainers? In the E drive where all the apps are, there is one app Xored Trainer Launcher and opening it just displays the image saying"Team Xored Presents ETM/XBTF Engine V2.2" and some names. Nothing actually happens here.
To escape it, I have to manually reboot the console as no button works and nothing responds.
However, under the Scripts, there are many and one is infact EvoxT-Trainers. Do I have to use this one for my trainer purposes? If yes then please gimme a lil' nudge in the right direction.
try using the evox trainer launcher they should work most of mine do.