Post by: Xombe on January 29, 2007, 04:05:00 PM
That said, what exactly is the problem? Not flashing properly when you try (because there's not much needs to be edited on the *menu* section of things)?
Any reason your not flashing from a HDD install of Evox rather than from a boot disc (it'll work, but I'm curious...)?
Most importantly: What problem are you encountering? What chip are you trying to flash (slim chance the FLASH entry for that hardware isn't present, but that's not often the case)?
As for the @ marks, those specify which [Action] command that given menu entry runs. Remove the 2 from the three character string and what's left is the Action ID.
I would suggest running Evox from your HDD, copying over the one single bios file you want to flash to the Evox\BIOS subfolder, and flashing that way.
Post by: danniman2002 on January 29, 2007, 06:31:00 PM
Everything worked out fine after i added the new "flash [action] command" in the evox.ini...
The flash went well... The reason that i wanted a new bios was because I wanted to make XBMC my dashboard, so i had to change the boot order in the bios with XBtool. Just in case you wondered...
Thanx for helping me out
