Post by: Kypreos on June 08, 2003, 07:10:00 PM
Post by: luther349 on June 08, 2003, 07:47:00 PM
Post by: rahula on June 08, 2003, 10:08:00 PM
I use Px HDD loader v 1.1a and works really great. You can also use xbcopy too. they both works flawlessly. If you are loading a game from binary news group make sure you have a complete game.
Post by: smcculloch on July 08, 2003, 05:49:00 AM
Any Ideas? I have disabled all IGR flags in evox.ini
Post by: roar on July 08, 2003, 07:00:00 AM
Those would be...
What bios am I running? It should be 4976.02 or greater
Do I have Evox's IGR's turned off in all 3 places? The answer to this should be YES
If it is not either of these two questions and the game in question is any other game other then enter the matrix your game DID NOT copy properly, do it again, make sure you are working from an original and make sure the total files copied and the size copied are the same as what made it to your xbox.
Post by: rameysblackbelt on July 08, 2003, 07:30:00 AM
Post by: rameysblackbelt on July 08, 2003, 02:15:00 PM
1 was i have the ecuter 2 lite chip which has the old bios from modchip.ca but i thought i was flashing it but i still had the protection plug on place f on the chip this will make the chip non flasable so i reoved it and reflashed it with the dvd i have and bingo it worked . also i went into the settings in evolution x and set my settings all 3 where it says (in game reset) all three of these had to be switched to off , it is best
to use th dvd i have that has evolution x and new bios for chips also remember to put the plug back on incase you rent a game that comes out that will erase your bios , that is what the protection is for , email me if i can help anyone united we stand heheheh :evil:
Post by: roar on July 08, 2003, 02:30:00 PM
| QUOTE (rameysblackbelt @ Jul 8 2003, 06:15 PM) |
also remember to put the plug back on incase you rent a game that comes out that will erase your bios , that is what the protection is for , email me if i can help anyone united we stand heheheh  |
Who the heck told you that? Oh jeez.
Post by: chevy on July 08, 2003, 05:44:00 PM
How do Install XBcopy?
I have never been able to find a tutorial on editing evox.ini.
Post by: smcculloch on July 08, 2003, 07:36:00 PM
| QUOTE (roar @ Jul 8 2003, 04:00 PM) |
| When a game won't load, ask yourself 2 questions before asking here... Those would be... What bios am I running? It should be 4976.02 or greater Do I have Evox's IGR's turned off in all 3 places? The answer to this should be YES If it is not either of these two questions and the game in question is any other game other then enter the matrix your game DID NOT copy properly, do it again, make sure you are working from an original and make sure the total files copied and the size copied are the same as what made it to your xbox. |
Thanks Roar, I am updating my BIOS tonight, I still have the original that came with my X2Lite.