xboxscene.org forums

OG Xbox Forums => Dashboard Forums => EvolutionX Forum => Topic started by: okayama on February 11, 2003, 05:41:00 PM

Title: Quick And Easy Evo Question
Post by: okayama on February 11, 2003, 05:41:00 PM
I'm trying to ftp my xbox and pc.
I have an openbox mod, and excu bios.
I have Evo v1.8458 burnd on a cdrw- works fine.
I know, your going to tell me to update my Evo.
The reason I haven't is because I didn't want to mess with changing stuff on my HD.
My question is, inorder to do the ftp do I have to have Evo on my hard drive or can I do it off my dvd drive?
I'm having no such luck at all doing it off my dvd drive.
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 11, 2003, 05:48:00 PM
You can do it off of either one. CDRW/DVD works find and Harddrive works fine... what are the specific problems you are having? you using static ip or dhcp?
Title: Quick And Easy Evo Question
Post by: okayama on February 11, 2003, 05:59:00 PM
Not sure which one or how to tell. But this is what I can tell you.
I'm using a hub, no crossover cables.
xbox:
Static IP        192.168.000.003
Default GAte 192.168.000.001

Also I just now turned off passive in smart ftp. On my xbox Evo network settings screen, I noticed this now: IP: 0.0.0.0-

My ip settings on my pc have not been messed with at this time.
(hope this makes sense: before I turned off passive, I did change my ip settings. It didn't help any. The ip settings are set back to normal now.)

Still timing out in smart ftp
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 11, 2003, 06:06:00 PM
yup, if you xbox is saying 0.0.0.0 then it is trying to obtain an ip address from a dhcp server. you need to edit he evox.ini file and turn

staticip = yes
Title: Quick And Easy Evo Question
Post by: okayama on February 11, 2003, 06:20:00 PM
Well you see thats the problem. I thought the same thing but this is what the ini file looks like.

#tDoBIOS=1,
#tDoFlashBIOS=2,
#tDoDash=3,
#tDoLaunchMenu=4,
#tDoReboot=5,
#tDoNetwork=6,
#tDoHarddisk=7,
#tDoLaunch=8,


Section "Root"
{

   Item "MS Dashboard",@3
   Item "Reboot",@5

   Section "System Utils"
   {
      Item "Network",@6
      Item "Harddisk",@7
      Item "Flash BIOS",@1

   }

   Section "Launch Menu"
   {
      Section "Games"
      {
         Item "Halo","f:gameshalodefault.xbe"
         Item "Halo 2","f:gamesburnoutdefault.xbe"
         AutoAddItem "e:games"
         AutoAddItem "f:games"
         

      }

      Section "Apps"
      {

         AutoAddItem "e:apps"
         AutoAddItem "f:apps"
      }
   }
}






How do I turn on staticip in that?
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 11, 2003, 06:39:00 PM
does the version of evox you are using have an evox.ini and/or a menu.ini?
Title: Quick And Easy Evo Question
Post by: okayama on February 11, 2003, 06:44:00 PM
menu.ini
default.xbe
bio's (folder)

That's all it has. The cdrw works with these files.
I hope you can help me get this going. I've been wanting to do this for a long time now.
Title: Quick And Easy Evo Question
Post by: okayama on February 11, 2003, 07:11:00 PM
OK good news, I think.
I disconnected my hub and replaced it with a crossover cable.
This is what my xbox screen says now,

IP : 192.168.0.3 - Static
Static IP      :192.168.0.3
Default Gateway: 192.168.0.1

I'm using smart ftp in active mode, still get time out or something along the lines of that.
My Evo cdrw only has a menu.ini, which has nothing that I know of to change.
I haven't changed any ip settings on my pc.

Do I still have hope?
Title: Quick And Easy Evo Question
Post by: okayama on February 11, 2003, 11:04:00 PM
bump
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 12, 2003, 04:31:00 AM
Ahhh, sounds like you are getting closer... what is the ip address of your pc? can you ping the xbox's ip address from your pc?
Title: Quick And Easy Evo Question
Post by: okayama on February 12, 2003, 05:40:00 AM
You'll have to tell me how to do that.
Not sure how to check my pc ip.
I know,.... I'm stupid!
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 12, 2003, 06:04:00 AM
not stupid... I haven't met a person yet that new (Edit uhhhh or knew) how to check an ip address without first reading, being told or being shown how to do it... its not hard, its just one of those things that most people dont need to know how to do, so they dont...

ok, so now, it kinda depends on what version of Windows you are using...

Windows 9x,ME

Start,
Run,
Winipcfg
Ok

Windows NT,2K,XP

Start,
Run,
Cmd
Ok,
ipconfig
<enter>

if your using winipcfg then I believe you have to change the protocol to tcpip? I cant remember for sure... and if you have multiple nics or anything like that then you have to select the one that corrosponds to the nic you want...once you get that far, if it is not intuitive just post what options you have and I will tell you what to pick...
Title: Quick And Easy Evo Question
Post by: okayama on February 12, 2003, 07:13:00 AM
I have these buttons to use.

ok
release
renew
release all
renew all

I can also change from Genesys logic and Davicom dm9102/A PCI Fast Ether?

I can also change DNS servers vaules.

I hope this all makes sense to you.
Oh and I only have one NIC on my computer.

Not sure what you mean about protocol to tcpip.

Now that I know my IP address, how do I ping my xbox.
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 12, 2003, 08:09:00 AM
k, you saw your ip address right? That is all that matters. I am assuming it was when you change to Davicom dm9102/A PCI Fast Ether? Anyway, first thing is to verify that this is a correct ip address. It should be the same as your xbox ip address except with a different number at the end... for example

xbox = 192.168.0.3
pc = 192.168.0.2

Assuming that this is true then everything looks fine. Next thing to do is try pinging. It sounds like you have a 9x or ME pc so if that is the case do this...

Start,
Run,
Command
Ok,
Ping 192.168.0.3
<enter>

make sure that where I put 192.168.0.3 is the ip address of your xbox. Post what it says after you do that...
Title: Quick And Easy Evo Question
Post by: okayama on February 12, 2003, 09:00:00 AM
pinging 192.168.0.3 with 32 bytes of date:

request timed out.
request timed out.
request timed out.

Pinging statistics for 192.168.0.3:
Packets: sent = 4, received = 0, lost = 4 ( 100%loss),
Approximate round trip times in milli-seconds:
minimum = 0ms, maximum = 0 ms, average = 0ms

note: my pc ip was no where close to my xbox ip in either,(Genesys logic or Davicom dm9102/A PCI Fast Ether?)
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 12, 2003, 09:11:00 AM
QUOTE (okayama @ Feb 12 2003, 06:00 PM)
note: my pc ip was no where close to my xbox ip in either,(Genesys logic or Davicom dm9102/A PCI Fast Ether?)

That would be the problem then... do you have the hub connected to a dsl or cable modem? is there anything else connected to your hub, other than 1 pc and 1 xbox? The easiest thing to do would be to change is the xbox ip address to be similiar to your pcs ip. Just take the ip address from your computer say it was:

1.2.3.4

Then you would make you xbox
IP = 1.2.3.5
Gateway = 1.2.3.1

Title: Quick And Easy Evo Question
Post by: okayama on February 12, 2003, 01:55:00 PM
I tried doing that, but now my ip xbox went back to 0.0.0.0-.
You know the ip that you can't change on the screen above static ip.

I have a cable modem and a hub.
I tried using the hub at first, didn't work.
Now I'm just using a pc, crossover cable, xbox. (ever since I starting talking to you).

I still can't ping my xbox. I'm guessing its because my xbox's ip says 0.0.0.0-
Title: Quick And Easy Evo Question
Post by: SumDumGuy on February 12, 2003, 02:03:00 PM
oh, right... ok, well, it should only say 0.0.0.0 if it is trying to use dhcp? is usestaticip set to yes?
Title: Quick And Easy Evo Question
Post by: okayama on February 12, 2003, 02:09:00 PM
QUOTE (SumDumGuy @ Feb 12 2003, 10:03 PM)
is usestaticip set to yes?

are you talking about the menue.ini?
If so, it doesn't have that setting. I posted the whole file in the begining of my posts
Title: Quick And Easy Evo Question
Post by: okayama on February 12, 2003, 02:29:00 PM
ok I got it to ping.
I didn't know if you restart your computer that ip # changed in the winipcfg command.
I changed the ip and gateway on the xbox like you said. This is what I get when I ping it.

Pinging xxx.xxx.xxx.xx.xxx with 32 bytes of data:

Reply from x.x.x.x: bytes = 32 time<10ms TTL=128
Reply from x.x.x.x: bytes = 32 time=1ms TTL=128
Reply from x.x.x.x: bytes = 32 time<10ms TTL128
Reply from x.x.x.x: bytes = 32 time=1ms TTL=128

Pinging statistics for x.x.x.x:
Packets: sent = 4, received = 4, lost = 4 ( 0%loss),
Approximate round trip times in milli-seconds:
minimum = 0ms, maximum = 1 ms, average = 0ms

When I try smart ftp I get unkown error.
I tried a xbox program to transfer files and got a time out.
Title: Quick And Easy Evo Question
Post by: okayama on February 12, 2003, 02:31:00 PM
wait a minute, I pinged my computer and got that.
When I pinged my xbox I got the other one. Request timed out.


Does it matter when I look at my ip on my pc and the default gateway it blank.

I have values for:
adapter address
IP autoconfiguration address
Subnet Mask

I have no value for:
Default Gateway

These is for the Genesys logic. (IP Configuration Ethernet Adapter)
the davicom has values for everything. Only thing is when I swicth it to Davicom and press ok. I go back into it to look at it and it's back to Genesy logic.
Title: Quick And Easy Evo Question
Post by: okayama on February 13, 2003, 04:13:00 AM
bump
Title: Quick And Easy Evo Question
Post by: okayama on February 13, 2003, 09:02:00 PM
bump