Post by: xboxcrazy on September 11, 2002, 03:39:00 AM
i used smartftp but i could see all the files
thats why i use flashfxp
Post by: alfaromeo303 on September 11, 2002, 03:45:00 AM
Post by: shinkansen on September 11, 2002, 06:47:00 PM
| QUOTE (alfaromeo303 @ Sep 11 2002, 09:17 AM) |
| Ok guys, i am running evox bios 2.4 and the new dashboard... I'm using WS_FTP to copy to & from the xbox, guess what the speeds are now? Around 60Mbps (this is around 7,5 Megabytes/sec), go and download ws_ftp, and try it yourself! (With flashfxp it was around 1,6 Megabytes/sec) Regards, Alfaromeo303 |
what is your setup?
I've tried with WS_FTP, still 1.6M/sec.
Did you have to go and do software setup?
I am using a Negear router and 100Mb network.
Thanks
Post by: UsMarine on September 11, 2002, 10:25:00 PM
Post by: UsMarine on September 12, 2002, 03:01:00 AM
Post by: Hammy on September 12, 2002, 05:25:00 AM
Post by: UsMarine on September 12, 2002, 05:30:00 AM
Post by: alanrob on September 12, 2002, 11:39:00 AM
I downloaded DOA3 (4.5GB) in 7 mins and today it took almost 8 mins to download Turok which is only 2.7GB.
DOA3 just has 25 files were as Turok has hundreds.
Post by: shinkansen on September 12, 2002, 11:59:00 AM
Post by: UsMarine on September 12, 2002, 12:28:00 PM
where do you go to go into your network card properties?
Post by: EvilCarnal on September 12, 2002, 12:30:00 PM
Any more info on this will be appreciated. Thanks!
Post by: UsMarine on September 12, 2002, 12:49:00 PM
just a guess on the time but it is almost 5 times faster"kEeP oN kEePiN oN"
Post by: SlaYer on September 12, 2002, 01:00:00 PM
I was using the same exact hardware and configuration and connected to the xbox via a Cisco 100BT Switch.
With the old EvoX dash I got one connection at just about 1MB/Sec
With the new EvoX dash I get 10MB/sec on a single connection and have not changed anything!
I am really happy and impressed with this speed improvement in the dash. I believe that since most people that have tested this before had 10BT, just a hub or were set on half duplex were not seeing any performance improvements and assumed the new dashboard was the same.
EvoX, please keep this up, you guys Rule!
Post by: SlaYer on September 12, 2002, 01:37:00 PM
| QUOTE (imboot99 @ Sep 12 2002, 07:24 PM) |
| no actually it doesnt matter if u have a 10mb or 100mb card, because the nic card in the xbox in 10mb, so stfu |
The point I was trying to make is that the new EvoX Dashboard FTP Daemon is Faster! That's it.
Enjoy!
Post by: M3_DeL on September 12, 2002, 02:31:00 PM
Thought my hub was gonna explode.....
Post by: turbolover on September 12, 2002, 04:42:00 PM
Post by: scyraxxx on September 12, 2002, 04:58:00 PM
| QUOTE (UsMarine @ Sep 12 2002, 06:49 PM) |
| Right click "My Computer" go to properties , click on the Hardware Tab then click on "Device Manager" then you will see a list click on "Network Adapters" now all your network adapters should be right under it the one you need to adjust says "Ethernet Adapter" somewhere in the name right click it then go to properties then click on the Advanced" Tab and where it says "Value:" is where you change it 100BASETX Full_Duplex then click OK |
well
when i changed it to 100BASETX Full_Duplex i couldn't connect to the internet anymore! why? i had to restore it to automattic again! 
well anyways i'm gonna test the speed! so if it's worth then i wont mind changing the settings everytime i connect to the internet or to the xbox!! i'm using a switch!!
Post by: opjose on September 12, 2002, 08:22:00 PM
| QUOTE (imboot99 @ Sep 12 2002, 07:24 PM) |
| no actually it doesnt matter if u have a 10mb or 100mb card, because the nic card in the xbox in 10mb, so stfu |
NOT TRUE!
The Xbox's Nic is 10/100mbps.
I've verified this using an intelligent switch.
The Xbox can do EITHER.
This stands to reason, since MS would want to cover their collective tails, and the price difference to bump up to a dual mode nic is almost nil.
Post by: UsMarine on September 12, 2002, 08:39:00 PM
If it was me when I am gonna send games to my pc from my xbox it is worth connecting it directly saves you ALOT of time in the transfer" then just switch it back to your hub
Post by: UsMarine on September 13, 2002, 12:16:00 AM
BTW does anyone have the Code for FlashFxp? I am on day 63 of my 30 day evaluation lol and it sukcs to wait 15 seconds for it to let me start I have version 1.4.3
Post by: Troll123 on September 13, 2002, 06:26:00 AM
Post by: skullcrusher on September 13, 2002, 07:37:00 AM
When sending files from the XBox to PC (either from the hard drive or DVD) the speeds I get are normally around 6000-9000k/sec. However, when I send files from my PC back to the XBox hard drive, the speeds go anything from 600k/sec to 1200k/sec.
I can only guess that the write cache on the xbox hard drive is almost none-existant... after all, why would MS bother with it, when by default, the drive is only meant for saving a few bytes of save games at a time...
Anyone else get this conclusion?
Regards
SkullCrusher
Post by: opjose on September 13, 2002, 09:25:00 AM
My PC has 8megs per drive, let alone the software cache.
Also I'll bet the Xbox has little packet buffering, unlike the PC.
Post by: M3_DeL on September 14, 2002, 01:23:00 AM
Post by: M3_DeL on September 14, 2002, 03:45:00 AM
On a side note has anyone tried to connect to their xbox via net. that is not being on the same hub or switch what not?? and if so is their any known vulnarability to leaving it on the net?
-M3
Post by: majik655 on September 14, 2002, 12:40:00 AM
Next you loose net connection because your ISP does not allow 100 speed. You must connect as a 10, at least this was the way AT&T is right now.
Last.
I brought this issue up once before.. about being vulnerable...
if you connect you xbox up to a hub and share internet connection...
all someone has to do is scan and come across your XBOX's IP address.
if you have it connected with evo dash GUESS WHAT. depending on your evo dash version all I have to do is connect anonymously to port 21 xbox IP and I see and have delete access to EVERYTHING.
Now that is what is good about newest versions ...
they allow passwords in ftp!!!!!