Post by: flashbak on September 11, 2002, 03:26:00 AM
Post by: akarnid on September 11, 2002, 04:16:00 AM
My assumption is that EvoX somehow figures that it connects thru a DHCP server, and configures it's settings accordingly
If anyone here has had this problem then I would be grateful if they could share their experience.
Post by: UsMarine on September 11, 2002, 05:07:00 AM
XBox IP 192.168.100.2
PC 192.168.100.3
Default Gateway: 192.168.100.1
subnet mask: 255.255.255.0
and if it doesn't work tell me and if it does keep on keepin on
Post by: UsMarine on September 11, 2002, 05:50:00 AM
Post by: akarnid on September 11, 2002, 11:59:00 AM
Post by: mikejf on September 11, 2002, 12:03:00 PM
The network settings are saved to the evox.ini file.
If evox.ini is on your CD-RW, then it will NOT be saved! I think.....
Post by: akarnid on September 11, 2002, 12:13:00 PM
Post by: mikejf on September 11, 2002, 12:21:00 PM
| QUOTE (akarnid @ Sep 11 2002, 02:13 PM) |
| Then I have a catch 22 situation here...what did you guys use? Did you have to modify the IP settings before EvoX started working properly?? |
Don't use a static IP!
Just look at the IP assigned on the Xbox, and use that on your PC's FTP client.
It's a pain, changes each time, but you shouldn't need to do this often right?
Post by: Demon on September 11, 2002, 12:32:00 PM
Why are you rebooting? You shouldn't have to. Just fire up Evox, make your settings, then ftp to it. Get it off the CD and onto the HD, and then you should be ok! But don't reset the XBox each time; you shouldn't have to.
You can also edit the evox.ini file before you put it on the cd. Just put the values you want in there and it will boot up with those settings.
:d:
Post by: akarnid on September 13, 2002, 07:39:00 AM
| QUOTE (mikejf @ Sep 11 2002, 06:21 PM) | ||
Don't use a static IP! Just look at the IP assigned on the Xbox, and use that on your PC's FTP client. It's a pain, changes each time, but you shouldn't need to do this often right? |
The IP assigned on the xbox is 0.0.0.0 - and that is definately not a valid IP to connect to.
Post by: nVidiot on September 14, 2002, 02:00:00 AM
Your problem lies in the fact that you are trying to run from a CD-RW without setting up the evox.ini BEFORE you burn it. When you change a menu setting and try to save it, it is ATTEMTING to save it to the evox.ini on the CDRW, which is not possible.
If you burned EvoX from an ISO file, you will first need to extract the ISO then make the changes to the INI, and burn from there. Just edit the ini with notebook, the settings that you need to change should be pretty obvious.
Good luck.
nVidiot
Post by: akarnid on September 16, 2002, 09:34:00 AM
And I used the ONLY method to get EvoX onto my hard drive - using the Boxplorer-burnt-onto-a CDRW method. It took the better part of...like 10 minutes
I'm very happy now....
Post by: UsMarine on September 16, 2002, 08:25:00 PM
Post by: jinsatoemo on September 19, 2002, 03:26:00 AM
I used to have that problem too but it's solved now.
I set the xbox ip=198.162.0.2,subnet=255.255.255.0,gateway=198.162.0.1,static ip=no.
I set my pc ip=198.162.0.1,subnet=255.255.255.0
At first,my xbox gets the 0.0.0.0 ip and I can't connect it to my pc.Then I tried installing ICS and now the xbox gets it's own dhcp ip as I defined earlier and it stays that way.Hope that helps!
Post by: UsMarine on September 19, 2002, 03:59:00 AM
lol I helped maybe 15 people with this problem so far end up going to sleep at 6am every night best of luck to all of your woman and children
Post by: CarpeNoctem on September 20, 2002, 03:02:00 AM
i foollowed the tutorial exactly but get no connection. virtual pc get a lan connection evry time i start it, but there is no e or f partition to find. i don't know what i have to do. i have evox installed on my xbox, do i also have to change the ini but who, when i get no connection to my xbox.
Post by: Malick on September 23, 2002, 02:26:00 PM
Post by: akarnid on September 23, 2002, 04:02:00 PM