Post by: Alex548 on April 23, 2006, 10:33:00 PM
Time again to clear out more of my stuff. Here's what I currently have:
· 4 CPU heatsinks
· 3 Passive GPU heatsinks
· 7 solid copper MCPX heatsinks (thermal tape pre-applied)
· Brand new sets of rubber case feet (just peel & stick)
· Brand new Thomson TOP60 replacement dvd lasers
Here's a picture of the GPU & CPU heatsinks: Click Me
Here's what the heatsinks & feet look like: Click Me
Here's a picture of the lasers: Click Me
Prices:
· CPU heatsinks & GPU heatsinks... make offer
· MCPX heatsinks $4 each or $$22 shipped USPS 2-3 day Priority Mail for all 7
· Brand new sets of feet $4 per set of 4 feet
· Lasers $16 shipped Priority Mail (discounts AND combined shipping available for bulk purchase)
Post by: appleguru on April 23, 2006, 10:39:00 PM
Post by: xboxuser5 on April 24, 2006, 12:52:00 PM
Post by: Alex548 on April 24, 2006, 08:47:00 PM
Adding:
1.0 TSOP flashed motherboard with xbox case bottom. I received this from _DiGiTaL_ several months ago.
It was supposed to be a working board... never worked for me. I was told it was flashed with X2 4981.06
Here's what I've done:
Tried 3 different hdd's and rebuilt them with Slayer's 2.6 --> Error 13
Tried the same hdd's. Formatted & rebuilt them with AID 3.0--> Error 13
Soldered a pinheader & tried a DuoX2 chip --->Error 13
The board boots up, but goes to Error 13 no matter what I do to it. It reads the auto-installer discs with no problems and I can format/install anything I want, but upon rebooting it'll give Error 13 and sometimes Error 21.
I gave up on this board a long time ago and it's been sitting in my garage taking up space.
Maybe reflashing the TSOP would fix it... maybe it won't. That's about the only thing I haven't tried on it.
Throw me an offer if you feel like messing with it.
This post has been edited by Alex548: Apr 25 2006, 03:48 AM
Post by: Alex548 on April 26, 2006, 12:10:00 AM
Still have buttloads of brand new feet and CPU heatsinks available.
Adding:
· Two BRAND NEW 80mm Cold Cathode kits (GREEN). The kits consist of the round 80mm Cathode, inverter, and on/off switch. $8 shipped (each)
Here's a picture: Click Me
Post by: dweebs0r on April 26, 2006, 04:21:00 PM
-D
Post by: dweebs0r on April 27, 2006, 02:25:00 PM
-D
Post by: Agrooreo on April 27, 2006, 11:15:00 PM
Post by: Alex548 on April 29, 2006, 02:58:00 AM
1 Green cathode kit has been sold.
WHAT'S LEFT:
· 5 CPU heatsinks with clips
· 1 Passive GPU heatsink (the one without a fan)
· Buttloads of rubber feet
· 1 Green 80mm cold cathode kit (brand new)
ADDING:
3 complete LOADED xbox cases (1.0-1.4 cases).
All cases include the following:
· Case top (with shielding & stock jewel)
· Case Bottom (with shielding)
· Front faceplate with power/eject buttons
· XBOX dvd bezel
· Controller ports
· Stock case fan
· Power/Eject PCB
· HDD/DVD trays
· Brand new set of rubber feet (just peel & stick)
· 6 T20 case screws
I'm asking $27 EACH shipped USPS 2-3 day Priority Mail
I'm also willing to sell all three together for $60 (shipped)
Post by: tylerchvz on April 29, 2006, 05:22:00 PM
pm me if so
Post by: hedgehogmd on April 29, 2006, 09:04:00 PM
Thank's
Post by: TheMasGaster on May 01, 2006, 11:08:00 AM
Post by: sex-box on May 01, 2006, 12:21:00 PM
Post by: xboxexpert on May 01, 2006, 12:44:00 PM
Post by: Alex548 on May 01, 2006, 03:17:00 PM
QUOTE(sex-box @ May 1 2006, 10:52 AM) 
how much for the complete case ( regular mail ) shipped to 80913
$20 shipped regular mail. Shoot me a PM if interested.
xboxexpert: YGPM
Thanx for the comments & bumps guys.
Post by: Alex548 on May 02, 2006, 11:55:00 PM
BUMP. Just struck a deal with my supplier. I should have a buttload of lasers within the next two weeks.
I'll have both versions of the Philips laser AND Samsung 605b lasers available soon. I'll keep you guys posted.
Still have a few LOADED cases I'd like to get rid of since they're just taking up space in my garage.
Post by: dweebs0r on May 04, 2006, 06:06:00 AM
-D
Post by: Alex548 on May 09, 2006, 04:43:00 PM
Just added a 5 pack of brand new TOP60 Thomson lasers on ebay. Starting price $39.99 (3 day auction).
Click Me
Post by: puffdank on May 09, 2006, 07:20:00 PM
Post by: Alex548 on May 09, 2006, 07:57:00 PM
Post by: Arjun on May 10, 2006, 05:19:00 PM
Post by: Alex548 on May 11, 2006, 12:01:00 AM
Modded xbox with 250 gig Western Digital 7200 RPM hdd (w/8MB cache).
DETAILS:
· 1.4 Motherboard
· X2.6CE installed (soldered pinheader,hdd, LAN and D0 wires)
· Bank 1 has FlashBIOS 3.03, Bank 2 has X2_5035
· Western Digital 250 gig hdd (7200RPM & 8MB Cache)
· Blue/Yellow bi-color LED's in the Power/Eject PCB
· Thomson DVD drive with BRAND NEW TOP60 laser
· Genuine M$ A/V cables
· Genuine M$ power cord
· Brand New M$ s-controller (still in sealed package)
Dashboards:
· UnleashX is setup to boot from F:\ drive as the primary dashboard
· M$ Dash available from unleashX main menu
· Avalaunch available from Apps menu
· EvoX available from Apps Menu
· XBMC available from the Apps menu
Other Preinstalled items (only the most important ones are listed):
· latest version of XBMC
· latest version of dvd2Xbox
· Halo Cache Editor
· Xored trainer launcher
· Mimesis
· dvdX v2.0 (Xecuter version)
· Enigmah NTSC-PAL video switcher
· XbPartitioner
· LinksBoks
· XBFTP
· ALL EMULATORS (no ROMS... you supply your own).
I'm asking $225 shipped USPS 2-3 day Priority mail with delivery confirmation & insurance. VERY IMPORTANT: Please be aware the 250 gig hdd I used in this system is not lockable. If you don't use Xbox live OR you already have another xbox dedicated to xbox live use... then here's a nice deal for ya.
Feel free to PM or post any questions and go ahead & take a look at my ebay feedback & references (links in my sig).
Post by: Alex548 on May 11, 2006, 08:32:00 PM
Just got confirmation from my supplier on the lasers I ordered. They'll be arriving early next week. (IMG:style_emoticons/default/smile.gif)
Keep an eye on this thread if you have some DDE drives and u wanna replace the lasers on Sammy (605b) and Philips drives (both versions).
If you want Thomson lasers... I already have those in stock.
The more you buy, the lower the price.
Here's a 5 pack of lasers that I'm selling on ebay:Click me.
Current price $39.99 and it ends tomorrow night (20 hours from now).
This post has been edited by Alex548: May 12 2006, 03:37 AM
Post by: xboxuser5 on May 12, 2006, 11:48:00 AM
Post by: MonsterTy on May 13, 2006, 09:27:00 PM
Post by: Alex548 on May 14, 2006, 01:41:00 PM
Anyway, thanx for the bumps guys.
Post by: dweebs0r on May 14, 2006, 04:52:00 PM
Awesome customer service. You cant go wrong with this guy.
-D
Post by: MonsterTy on May 14, 2006, 06:09:00 PM
Bro, I need to get ahold of a set of 4 rubber feet and a loaded stock case (if in GREAT condition). Please pm me with price shipped to 47909 and PayPal info.
Post by: Alex548 on May 14, 2006, 05:38:00 PM
I sold 6 cases today, but I can always sell one more.
Post by: dweebs0r on May 15, 2006, 08:04:00 AM
-D
Post by: Alex548 on May 15, 2006, 03:30:00 PM
Price dropping to $200 shipped USPS 2-3 day Priority Mail with delivery confirmation and insurance.
Most of my loaded cases are gone and the only ones left have vinly or chrome skins on them.
This post has been edited by Alex548: May 15 2006, 10:32 PM
Post by: Alex548 on May 16, 2006, 11:47:00 AM
Samsung SOH-D12 (fits SDG-605b drives): $16 shipped Priority Mail
Philips lasers V1 (fits VAD6011 & VAD6011/21 drives) $16 shipped Priority Mail
Thomson TOP60 lasers (fits all thomson drives) $16 Shipped Priority Mail
Philips complete laser assembly (laser, motor, etc....) $20 shipped Priority Mail
(fits VAD6011 & VAD6011/21 drives).
Of course, if you're interested in 5 or more lasers, I can go as low as $10 per laser.
Post by: blubox on May 16, 2006, 12:08:00 PM
Post by: Agrooreo on May 17, 2006, 12:27:00 AM
Post by: puffdank on May 17, 2006, 11:05:00 AM
Post by: Alex548 on May 17, 2006, 12:05:00 PM
Yeah, I have several 1.6 PSU's available. $20 shipped or I'll entertain trade offers.
Did some work last night on some dvd drives so here's what I currently have for sale:
LASERS:
· Thomson TOP60 lasers $16 shipped Priority mail
· Samsung SOH-D12 lasers (for SDG-605b drives) $16 shipped Priority Mail
· Philips VAD6011 & VAD6011/21 lasers $16 shipped Priority Mail
· Complete Philips laser assembly ( in-cludes laser, new motor & assembly) $20 shipped
Ask about bulk discounts.
DVD DRIVES:
· Two used Thomson drives with brand new lasers $32 each
· Two Philips VAD6011 dvd drives w/new laser $45 each
· One Philips VAD6011/21 w/new laser (cosmetic damage on lid) $40
· Hitachi GDR-8050L xbox drive (hard to find). Had tray sticking problem that I fixed. Successfully opened & closed it 50 times without a problem and laser works great. $50 shipped.
Premodded xboxes:
· Premodded xbox w/1.4 motherboard & X2.6CE modchip.
· Preflashed with FlashBIOS 3.03 on bank 1 and X2_5035 on bank 2
· Western Digital 250 gig hdd (7200 RPM with 8MB cache). NOT LOCKABLE
· All necessary apps, dashboards & Emulators pre-installed (NO GAMES OR ROMS)
· Brand New M$ s-controller (still in sealed package)
· Genuine M$ A/V cables
· Genuine M$ Power cord
I'm asking $200 shipped USPS 2-3 day Priority Mail with delivery confirmation and insurance. Once again, the 250 gig hdd on this xbox is not lockable so don't expect to be able to use Xbox Live with this box. The 250 gig hdd definitely makes this xbox a bargain for people who want a modde box to store games & music.
Please post or PM me with any offers and/or questions you may have.
Here's something interesting. See the word "in-cludes" in my description for the premodded xbox? It won't let me spell it like it's supposed to be spelled. Instead it automatically sticks the - into the word.
Can someone else try & confirm this: in-cludes (See, it keeps adding the hyphen).
Post by: deadparrot on May 17, 2006, 01:24:00 PM
And while I'm here, you wouldn't happen to have any more MCPX/GPU heatsinks in stock would you?
Post by: Alex548 on May 17, 2006, 03:02:00 PM
GPU heatsinks, I have two passive ones with clip if you're interested.
Post by: deadparrot on May 17, 2006, 03:16:00 PM
This post has been edited by deadparrot: May 17 2006, 10:18 PM
Post by: joioi50 on May 18, 2006, 06:08:00 AM
I'm intrested in 5 lenses, is 55usd for them +shipping to sweden a good price? Also what would shipping be.
The MCPX heatsinks & GPU heatsinks you will get are they special or standard, I'm looking for heatsinks that are more effective so I can have cooler xbox.
QUOTE(Alex548 @ May 16 2006, 07:18 PM)
Lasers came in yesterday.
Samsung SOH-D12 (fits SDG-605b drives): $16 shipped Priority Mail
Philips lasers V1 (fits VAD6011 & VAD6011/21 drives) $16 shipped Priority Mail
Thomson TOP60 lasers (fits all thomson drives) $16 Shipped Priority Mail
Philips complete laser assembly (laser, motor, etc....) $20 shipped Priority Mail
(fits VAD6011 & VAD6011/21 drives).
Of course, if you're interested in 5 or more lasers, I can go as low as $10 per laser.
Post by: AfterTheInsanity on May 18, 2006, 01:59:00 PM
Post by: Alex548 on May 18, 2006, 02:22:00 PM
QUOTE(deadparrot @ May 17 2006, 01:47 PM)
If you still have one when you get the MCPX heatsinks could you price 1 or each up for shipping to the UK? Then I'd be interested for sure.
Since I didn't make a bulk order on the heatsinks, they're gonna cost me $3 each.
I can go ahead & sell them for $4.50 + shipping.
Your choices for shipping to the UK are USPS Global Priority Mail ($9.50 US) or USPS Airmail Letter Post ($2.10US).
These heatsinks are small, but surprisingly heavy.
QUOTE(joioi50 @ May 18 2006, 05:15 AM)
Hi Alex
I'm intrested in 5 lenses, is 55usd for them +shipping to sweden a good price? Also what would shipping be.
The MCPX heatsinks & GPU heatsinks you will get are they special or standard, I'm looking for heatsinks that are more effective so I can have cooler xbox.
Yeah, $55US + shipping is fine.
Shipping via USPS Global Priority Mail is $9.50 according to USPS website, it'll take 4 to 6 days to arrive in Sweden.
MCPX heatsinks are rather small. The ones I have are 20x20x15mm (lengthxwidthxheigth). They're solid copper and have pre-applied thermal adhesive on them (just peel & stick).
The heatsinks are to be installed directly onto the MCPX (Nvidia chip on the motherboard). These won't help bring temps down on your CPU or GPU. They're specially made to keep your MCPX cool (prevents overheating & burnout).
Here's a picture of the MCPX heatsink installed (the copper square to the right of the X2.6CE modchip):
QUOTE(AfterTheInsanity @ May 18 2006, 12:30 PM)
Hey Alex, would you happen to have a CPU clip lying around that you're willing to sell? Let me know.
Yeah, I have one. Just pay shipping for a 6oz package. Your choice of the following:
USPS Global Priority Mail: $9.00 (US)
USPS Airmail Letter Post: $1.95 (US)
Post by: MonsterTy on May 18, 2006, 04:35:00 PM
Post by: FearX351 on May 18, 2006, 10:07:00 PM
Post by: MonsterTy on May 19, 2006, 12:08:00 AM
Post by: Alex548 on May 18, 2006, 11:49:00 PM
The MCPX heatsinks will arrive early next week.
I won't be selling any until they're actually in my hand and ready to ship.
I'll let you guys know when they arrive.
This time, I only ordered 40 of them so I didn't get my usual bulk discount. That means I'm gonna charge $4.50 each (shipped) instead of $4 each
Quick Update:
Xbox with 250 gig hdd has been sold. Just waiting for payment to arrive.
Post by: MonsterTy on May 19, 2006, 08:36:00 AM
Post by: Alex548 on May 19, 2006, 10:46:00 AM
I DO have a wiring harness that converts 1.0 PSU's so they work with 1.2-1.4 motherboards.
Post by: MonsterTy on May 19, 2006, 05:55:00 PM
(47909)
Post by: Alex548 on May 19, 2006, 06:03:00 PM
By the way, I looked through my box of PSU's and it turns out I have ONE 1.2-1.4 PSU.
It was in the box with all the other 1.6 PSU's I have.
Either way, I'll shoot you a PM.
Post by: Alex548 on May 22, 2006, 10:24:00 AM
I think everyone has their USPS delivery confirmation numbers. If I didn't send you one, please PM me & I'll get it for ya when I get home from work.
Post by: AciDBoy on May 22, 2006, 01:55:00 PM
Post by: Alex548 on May 22, 2006, 02:05:00 PM
Let me know how many sets you need.
ADDING:
Linksys WRT54GC Compact All-In-One Wireless G Broadband Router.
Brand new and still in sealed package. Purchased a couple weeks ago from Office depot. Retails for $59.99, it's currently on sale at bestbuy.com, for $55.99, and the absolute lowest price on pricegrabber.com is $42 shipped.
Taking best offers or trades.
Post by: MonsterTy on May 22, 2006, 06:13:00 PM
Post by: no0b123 on May 22, 2006, 07:45:00 PM
Post by: Alex548 on May 22, 2006, 10:42:00 PM
Thanx for the bumps guys. I really appreciate it.
Post by: Alex548 on May 23, 2006, 02:17:00 PM
· Thomson TOP60 lasers $16 shipped Priority mail
· Samsung SOH-D12 lasers (for SDG-605b drives) $16 shipped Priority Mail
· Philips VAD6011 & VAD6011/21 lasers $16 shipped Priority Mail
· Complete Philips laser assembly ( in-cludes laser, new motor & assembly) $20 shipped
Ask about bulk discounts.
DVD DRIVES:
· Two used Thomson drives with brand new lasers $32 each
· Two Philips VAD6011 dvd drives w/new laser $45 each (Priority Mail)
· Hitachi GDR-8050L xbox drive (hard to find). Had tray sticking problem that I fixed. Successfully opened & closed it 50 times without a problem and laser works great. $50 shipped (Priority Mail).
MISCELLANEOUS:
Linksys WRT54GC Compact All-In-One Wireless G Broadband Router.
Brand new and still in sealed package. Purchased a couple weeks ago from Office depot. Retails for $59.99, it's currently on sale at bestbuy.com, for $55.99, and the absolute lowest price on pricegrabber.com is $42 shipped.
Taking best offers or trades.
Post by: Agrooreo on May 23, 2006, 09:05:00 PM
Post by: caseyhalone on May 24, 2006, 06:42:00 PM
Post by: Alex548 on May 25, 2006, 03:17:00 PM
QUOTE(Alex548 @ May 23 2006, 01:24 PM)
LASERS:
· Thomson TOP60 lasers $16 shipped Priority mail
· Samsung SOH-D12 lasers (for SDG-605b drives) $16 shipped Priority Mail
· Philips VAD6011 & VAD6011/21 lasers $16 shipped Priority Mail
· Complete Philips laser assembly ( in-cludes laser, new motor & assembly) $20 shipped
Ask about bulk discounts.
DVD DRIVES:
· Two used Thomson drives with brand new lasers $32 each
· Two Philips VAD6011 dvd drives w/new laser $45 each (Priority Mail)
· Hitachi GDR-8050L xbox drive (hard to find). Had tray sticking problem that I fixed. Successfully opened & closed it 50 times without a problem and laser works great. $50 shipped (Priority Mail).
MISCELLANEOUS:
Linksys WRT54GC Compact All-In-One Wireless G Broadband Router.
Brand new and still in sealed package. Purchased a couple weeks ago from Office depot. Retails for $59.99, it's currently on sale at bestbuy.com, for $55.99, and the absolute lowest price on pricegrabber.com is $42 shipped.
Taking best offers or trades.
Also adding:
Solid copper MCPX heatsinks. They have pre-applied thermal adhesive so all you have to do is peel and stick. They measure 20x20x15mm (length x width x height). I only have 40 of them in stock. $4.50 each shipped in the U.S. and $5.50 each anywhere else.
Post by: Necrophiliac on May 25, 2006, 04:52:00 PM
Post by: deadparrot on May 26, 2006, 09:47:00 AM
Post by: Alex548 on May 26, 2006, 04:43:00 PM
Can't believe nobody is interested in that brand new Linksys WRT54GC Router.
Anyway, all the stuff in my previous post is still up for sale if anyone is interested.
I can also put together a modded xbox if anyone is interested. I ordered a brand new Western Digital 80 gig hdd (7200 RPM w/8MB cache), then the guy backed out on the deal.
I have X2.6CE and DuoX2 Cromwell chips to choose from if you're interested in a modded box.
Post by: caseyhalone on May 27, 2006, 10:26:00 AM
Post by: Alex548 on May 27, 2006, 04:09:00 PM
Got an offer of $36 shipped for the Linksys WRT54GC wireless broadband router. If I don't get anything higher within the next couple days... it's gonna be sold at that price.
Post by: jazzman161 on May 27, 2006, 09:31:00 PM
Post by: Alex548 on May 27, 2006, 09:59:00 PM
Anyone interested in a modded xbox with a duoX2 cromwell chip, 80 gig hard drive (lockable) virgin eeprom (courtesy of Zodiiak), duke controller, and genuine M$ A/V and power cables? Same specs and software I always install in my xboxes (look at previous posts). Make offers & I'll see what I can do.
I got stuck with this brand new 80 gig hdd so I figured I'd mod another one of my xboxes and sell it.
Post by: Agrooreo on May 28, 2006, 10:12:00 PM
Post by: RTK on May 29, 2006, 06:03:00 AM
Cheers from Taiwan,
-RTK
Post by: Alex548 on May 29, 2006, 03:49:00 PM
15 lasers $146 ($9.73 each)
I only have one version Philips laser. The laser fits the VAD6011 drives.
The confusion comes because I have the laser itself AND I also have the complete assembly... basically all the guts (laser, motor, rails, etc...).
If your motor is dead... the complete assembly is the way to go since you get a new laser AND new motor.
Anyway, shoot me a PM when you get your paypal account ready and I'll give you my payment info.
If you don't mind doing the mail route, I can also accept money orders.
Here's a picture of the complete laser assembly (courtesy of my supplier): Click Me
Post by: Alex548 on May 29, 2006, 11:40:00 PM
Router sold, xbox w/80 gig hdd pending sale, and a buttload of lasers will be shipping out tomorrow morning.
Thanx for the sales & thread bumps guys. I appreciate it.
Post by: EvilCloudStrife on May 30, 2006, 12:33:00 AM
Bump for a great guy and an awesome seller
Post by: Necrophiliac on May 30, 2006, 04:25:00 PM
Post by: Agrooreo on May 30, 2006, 09:06:00 PM
Post by: Agrooreo on May 31, 2006, 08:51:00 PM
Post by: Alex548 on May 31, 2006, 09:28:00 PM
Though I'm not advertising another xbox for sale, I can put another one together if needed.
I have several stock xboxes here waiting to be modded.
Post by: Agrooreo on June 01, 2006, 09:02:00 PM
And to add some entertainment to the bump....
Post by: AfterTheInsanity on June 02, 2006, 02:33:00 PM
Post by: Necrophiliac on June 05, 2006, 08:05:00 AM
Post by: Alex548 on June 05, 2006, 04:45:00 PM
Only 8 solid copper MCPX heatsinks left at $4.50 each (shipped).
I also have 5 Molex power splitters available at $3.00 each (shipped).
2 Loaded Cases (good paint job candidates) for $20 shipped.
They include:
· Case top w/shielding
· Case bottom w/shielding
· Case front face plate with power/eject buttons
· DVD bezel
· Stock case fan
· Power/Eject PCB
· Complete set of controller ports
· HDD Caddy
· DVD Caddy
· Set of 6 Torx 20 case screws
· Set of 4 brand new rubber case feet (just peel & stick)
These cases are NOT in mint condition. They have scuffs or scratches that make these perfect for paint mods. One of these cases has a small hole on the case top where someone overtightened the T20 case screw & poked a small hole through the case top. A dab of bondo or JB weld & some sanding will fix this right up.
Post by: deadparrot on June 06, 2006, 12:47:00 PM
Package was a bit fucked up (looked like the post office left it out in the rain, and then kicked it
) but the heatsinks were in perfect condition! Must be all that bubble wrap 
Post by: Alex548 on June 06, 2006, 03:19:00 PM
QUOTE(deadparrot @ Jun 6 2006, 11:54 AM)
Got my heatsinks today!
Package was a bit fucked up (looked like the post office left it out in the rain, and then kicked it
) but the heatsinks were in perfect condition! Must be all that bubble wrap That's strange. Glad I used bubble wrap on those heatsinks.
Here's what's available:
QUOTE
Only 8 solid copper MCPX heatsinks left at $4.50 each (shipped).
I also have 5 Molex power splitters available at $3.00 each (shipped).
2 Loaded Cases (good paint job candidates) for $20 shipped.
They include:
· Case top w/shielding
· Case bottom w/shielding
· Case front face plate with power/eject buttons
· DVD bezel
· Stock case fan
· Power/Eject PCB
· Complete set of controller ports
· HDD Caddy
· DVD Caddy
· Set of 6 Torx 20 case screws
· Set of 4 brand new rubber case feet (just peel & stick)
These cases are NOT in mint condition. They have scuffs or scratches that make these perfect for paint mods. One of these cases has a small hole on the case top where someone overtightened the T20 case screw & poked a small hole through the case top. A dab of bondo or JB weld & some sanding will fix this right up.
I also have 5 Molex power splitters available at $3.00 each (shipped).
2 Loaded Cases (good paint job candidates) for $20 shipped.
They include:
· Case top w/shielding
· Case bottom w/shielding
· Case front face plate with power/eject buttons
· DVD bezel
· Stock case fan
· Power/Eject PCB
· Complete set of controller ports
· HDD Caddy
· DVD Caddy
· Set of 6 Torx 20 case screws
· Set of 4 brand new rubber case feet (just peel & stick)
These cases are NOT in mint condition. They have scuffs or scratches that make these perfect for paint mods. One of these cases has a small hole on the case top where someone overtightened the T20 case screw & poked a small hole through the case top. A dab of bondo or JB weld & some sanding will fix this right up.
Also adding 3 slightly used (but working) original Duke controllers... $15 each
Post by: buddy69 on June 06, 2006, 06:22:00 PM
YGPM
Post by: dweebs0r on June 07, 2006, 04:45:00 AM
-D
Post by: deadparrot on June 07, 2006, 01:54:00 PM
QUOTE(Alex548 @ Jun 6 2006, 11:26 PM)
That's strange. Glad I used bubble wrap on those heatsinks.
You can never have too much bubble wrap!
Anyway, I just had to show off such a beautiful heatsink (picture taken with a K750i):
Post by: Alex548 on June 08, 2006, 05:05:00 PM
Heavy little bastards too.
I just received a bunch of stuff. Haven't had time to sort through everything, but I'll have some motherboards and maybe a modded xbox or two up for sale soon.
If anyone needs anything xbox related, let me know... I might have it.
Post by: deadparrot on June 11, 2006, 03:18:00 PM
Post by: BigSteel on June 12, 2006, 05:47:00 PM
Post by: StrictPuppet on June 13, 2006, 09:32:00 PM
and YGPM.
Post by: Alex548 on June 14, 2006, 02:13:00 PM
I now have a few working motherboards. If you need one, lemme know what versions you're looking for.
If you need them pre-modded with a duoX2 chip... I can do that too.
Working motherboards $50
Working motherboards flashed with virgin eeproms $58
Also, If you need motherboard/hdd combos, let me know and I'll see what I can do for you.
Post by: Agrooreo on June 14, 2006, 11:27:00 PM
Post by: Alex548 on June 15, 2006, 12:27:00 PM
For $140 shipped, you get:
· Xbox modded w/duoX2 chip
· DuoX2 preflashed with X2_5035 and Cromwell FlashBIOS 3.03
· Genuine M$ A/V cables
· Genuine M$ power cord
· Choice of controllers (Duke, s-controller, or new aftermarket s-style controller)
I ship USPS 2-3 day priority mail with delivery confirmation (and insurance).
Feel free to ask questions or make offers. Thanx.
Post by: Alex548 on June 16, 2006, 11:33:00 AM
· Working motherboards (I have a few). $50 shipped Priority Mail
· DuoX2 modded xbox w/stock hdd (includes controller & all cables) $140
· Solid Copper MCPX heatsinks w/pre-applied adhesive. $4.50 each
· Genuine M$ Crystal case. Excellent condition. $70 shipped Priority Mail
· Brand new rubber feet (sets of 4). Just peel & stick. $4.00 per set
· 1.6 PSU's $20 shipped Priority Mail
· Loaded stock case $20 shipped Priority Mail
· Samsung SDG-605b drive w/new laser for sale on ebay
· Brand new Samsung SOH-D12 lasers (for 605b drive) $15
· New Philips VAD6011 complete assemblies (laser, motor, rails, etc...) $18
· Brand new Purple aftermarket xbox case $20 shipped
Need pictures, have questions, wanna make an offer?
Feel free to post in this thread or shoot me a PM.
Thanx.
Post by: Alex548 on June 17, 2006, 11:02:00 AM
Post by: Alex548 on June 18, 2006, 05:14:00 PM
QUOTE
· Working motherboards (I have a few). $50 shipped Priority Mail
· DuoX2 modded xbox w/stock hdd (includes controller & all cables) $140
· Solid Copper MCPX heatsinks w/pre-applied adhesive. $4.50 each
· Genuine M$ Crystal case. Excellent condition. $70 shipped Priority Mail
· Brand new rubber feet (sets of 4). Just peel & stick. $4.00 per set
· 1.6 PSU's $20 shipped Priority Mail
· Loaded stock case $20 shipped Priority Mail
· Brand new Samsung SOH-D12 lasers (for 605b drive) $15
· New Philips VAD6011 complete assemblies (laser, motor, rails, etc...) $18
· Brand new Purple aftermarket xbox case $20 shipped
· DuoX2 modded xbox w/stock hdd (includes controller & all cables) $140
· Solid Copper MCPX heatsinks w/pre-applied adhesive. $4.50 each
· Genuine M$ Crystal case. Excellent condition. $70 shipped Priority Mail
· Brand new rubber feet (sets of 4). Just peel & stick. $4.00 per set
· 1.6 PSU's $20 shipped Priority Mail
· Loaded stock case $20 shipped Priority Mail
· Brand new Samsung SOH-D12 lasers (for 605b drive) $15
· New Philips VAD6011 complete assemblies (laser, motor, rails, etc...) $18
· Brand new Purple aftermarket xbox case $20 shipped
Post by: deadparrot on June 19, 2006, 01:29:00 PM
Anyway, got my AS5 today so I'll be breaking in that GPU heatsink!
Post by: Alex548 on June 19, 2006, 07:13:00 PM
1 Locked slim seagate hdd with eeprom chip. Eeprom chip was carefully extracted from a 1.4 motherboard.
1.4 Winbond TSOP. This TSOP was carefully extracted from the same motherboard that I pulled the eeprom from. No bent pins, no broken pins.
Everything else in my previous post is stlll available as well. Oh, almost forgot to add...
· 12 or 16 pin headers $1.50 each (shipped). I have 25 of them.
Post by: buddy69 on June 19, 2006, 07:27:00 PM
YGPM
Post by: Necrophiliac on June 20, 2006, 01:00:00 PM
Post by: DeadWolfBones on June 20, 2006, 04:15:00 PM
Post by: Agrooreo on June 20, 2006, 09:12:00 PM
Post by: Alex548 on June 21, 2006, 06:04:00 PM
QUOTE
· DuoX2 modded xbox w/stock hdd (includes controller & all cables) $140
· Solid Copper MCPX heatsinks w/pre-applied adhesive. $4.50 each
· Brand new rubber feet (sets of 4). Just peel & stick. $4.00 per set
· 1.0 PSU's $20 shipped Priority Mail
· 1.6 PSU's $20 shipped Priority Mail
· Loaded stock case $20 shipped Priority Mail
· Loaded stock case w/white vinyl skin $25 shipped Priority Mail
· Loaded stock 1.6 case w/green chrome skin $25 shipped Priority Mail
· Brand new Purple aftermarket xbox case w/accessories $20 shipped
· Brand new Samsung SOH-D12 lasers (for 605b drive) $15
· New Philips VAD6011 complete assemblies (laser, motor, rails, etc...) $18
· Samsung SDG-605b dvd drive w/new laser $45 Shipped
· Working Philips VAD6011 or VAD6035 dvd drives $40 shipped
· Thomson DVD drives w/new lasers $32 shipped
· Power/eject PCB's with blue/yellow bi-color LED's $10
· CPU heatsinks w/clip $7 shipped
· Passive GPU heatsinks w/clip $7 shipped
· Brand new Logitech wireless heatset $35 shipped
Also have other miscellaneous xbox & mod chip parts. I may have what you're looking for so please post or PM me with any questions.
Post by: gymguy on November 03, 2006, 02:14:00 PM
Post by: gymguy on November 03, 2006, 02:44:00 PM
Post by: Alex548 on November 03, 2006, 07:24:00 PM
I don't have any lasers for your VAD6035 dvd drive. You can try gameonyx.com
I believe he still has them in stock.
At the moment I only have Philips dvd drives available.
Thomson drives tend to suffer from way too many DDE errors so I no longer bother working on them.
No, I don't have any hdd's 80 gig or above at the moment. Try geeks.com I believe they currently have a 250 gig for $60 + shipping.
Your VAD6035 should be better than the VAD6011's I carry, but I suppose your laser has died. If you wanna save a few bucks (instead of buying a dvd drive from me), just get yourself a replacement laser.
I think that answers all your questions. If not . . . lemme know.
Post by: gymguy on November 04, 2006, 12:03:00 AM
Post by: Hashmire420 on November 04, 2006, 09:31:00 PM
Post by: Agrooreo on November 06, 2006, 09:58:00 PM
Post by: MonsterTy on November 07, 2006, 12:09:00 AM
Post by: Alex548 on November 07, 2006, 01:14:00 PM
Hashmire420, sorry. . . I don't carry replacement lasers anymore (except for these leftover Philips VAD6011 assemblies). I got rid of nearly all my xbox repair stuff a couple months ago and have no intention of acquiring more stuff for resale. As with gymguy above, try gameonyx. He carries both the SOH-D12 and the SOH-D16 lasers for the Samsung SDG-605b drive.
MonsterTy, YGPM.
Post by: seriouslysilly on November 08, 2006, 10:44:00 AM
It's a long shot, but I figured it's worth a shot (IMG:style_emoticons/default/smile.gif)
Post by: Alex548 on November 08, 2006, 03:27:00 PM
Post by: Alex548 on November 09, 2006, 08:22:00 PM
Here's what I have:
· 1.6 console (rarely used).
· DuoX2 GS Cromwell flashed w/X2_5035
· Seagate 250 gig hdd (lockable)
· Diffused green LED's in the controller ports
· Genuine M$ Duke controller
· Genuine M$ A/V cables
· Genuine M$ Power cord
I chose diffused LED's because they give off a nice glow (instead of blinding you like regular LED's).
The hard drive is set-up with many of the latest apps/emulators available.
XBMC 2.0 is pre-installed as well.
The primary dashboard is currently UnleashX, but can change it to whatever dash you choose (or you can do it yourself).
I'm asking $200 shipped Priority Mail (w/insurance).
Still available:
· Adaptec AVC-1400 Game Bridge (2 left @ $20 each).
Also, if you need a broken motherboard for repair/parts. . . lemme know since I have a few.
Post by: FallsInc on November 10, 2006, 06:07:00 AM
psu problem solved. where do you get all your xboxes from?
Post by: Alex548 on November 10, 2006, 02:34:00 PM
I get my xboxes primarily from ebay. I have all day (everyday) to skim through auctions from work. (IMG:style_emoticons/default/biggrin.gif)
1.6 modded xbox still 4 sale.
Post by: Alex548 on November 13, 2006, 02:58:00 PM
Still available:
· (2) Adaptec AVC-1400 Game Bridge units. $20 each
· USB 2.0 interface
· Play your favorite console games through your PC (using PC monitor)
· Record your gameplay to share w/friends
1.6 xbox console (rarely used).
· DuoX2 GS Cromwell flashed w/X2_5035
· Seagate 250 gig hdd (lockable)
· Diffused green LED's in the controller ports
· Genuine M$ Duke controller
· Genuine M$ A/V cables
· Genuine M$ Power cord
I chose diffused LED's because they give off a nice glow (instead of blinding you like regular LED's).
The hard drive is set-up with many of the latest apps/emulators available.
XBMC 2.0 is pre-installed as well.
The primary dashboard is currently UnleashX, but can change it to whatever dash you choose (or you can do it yourself).
I'm asking $200 shipped Priority Mail (w/insurance).
Post by: Alex548 on November 14, 2006, 05:58:00 PM
Items for sale:
· Philips VAD6011 dvd drive.
Cleaned, tested & works fine.
$35 shipped USPS 2-3 day Priority Mail.
(2) Adaptec AVC-1400 Game Bridge $20 each
· Play your xbox, xbox360, or other game consoles through your PC.
· USB 2.0 interface to your PC (plug & play)
· Includes all necessary software
· Software allows for you to play & record your gaming action
· Options on the software allow you to burn your gaming videos to disc.
· Supports RCA and S-video inputs
System Requirements
· Intel Pentium 4 at 1.3 GHz or Celeron and AMD Athlon equivalent
· Microsoft Windows 2000 SP4 or XP SP2
· 256MB of RAM (512 recommended)
· 250MB of available disk space for applications(additional hddspace required for captured video).
. DirectX 9 compatible graphic accelerator and sound card
· Available USB port on PC or notebook
· CD-R/W or DVD-R/W drive
See more tech specs & features at the manufacturer's website: Here
This post has been edited by Alex548: Nov 15 2006, 02:06 AM
Post by: Bdan629 on November 14, 2006, 06:06:00 PM
Post by: chronotrigger681 on November 14, 2006, 07:23:00 PM
http://www.geeks.com/details.asp?invtid=WD...B-R&cat=HDD
help desperatly in need
Post by: Alex548 on November 14, 2006, 07:56:00 PM
The closest they have in stock would be the Maxtor 120 gig @ $39.50 + $1.99 shipping (when you use the code SHIP4LESS).
Anyway, check your PM's for details since this has nothing to do with my b/s/t thread. (IMG:style_emoticons/default/wink.gif)
Post by: Alex548 on November 15, 2006, 10:53:00 PM
I have paypal cash ready or can trade a Game Bridge for it.
Still available:
QUOTE(Alex548 @ Nov 14 2006, 04:29 PM) 
· Philips VAD6011 dvd drive.
Cleaned, tested & works fine.
$35 shipped USPS 2-3 day Priority Mail.
(2) Adaptec AVC-1400 Game Bridge $20 each
· Play your xbox, xbox360, or other game consoles through your PC.
· USB 2.0 interface to your PC (plug & play)
· Includes all necessary software
· Software allows for you to play & record your gaming action
· Options on the software allow you to burn your gaming videos to disc.
· Supports RCA and S-video inputs
System Requirements
· Intel Pentium 4 at 1.3 GHz or Celeron and AMD Athlon equivalent
· Microsoft Windows 2000 SP4 or XP SP2
· 256MB of RAM (512 recommended)
· 250MB of available disk space for applications(additional hddspace required for captured video).
. DirectX 9 compatible graphic accelerator and sound card
· Available USB port on PC or notebook
· CD-R/W or DVD-R/W drive
See more tech specs & features at the manufacturer's website: Here
This post has been edited by Alex548: Nov 16 2006, 06:54 AM
Post by: Nubbs on November 15, 2006, 11:11:00 PM
Post by: Alex548 on November 15, 2006, 11:28:00 PM
Post by: deadparrot on November 16, 2006, 11:32:00 AM
Post by: Alex548 on November 16, 2006, 12:07:00 PM
Post by: deadparrot on November 16, 2006, 12:40:00 PM
Post by: MonsterTy on November 17, 2006, 11:08:00 AM
This man is an Xbox Part Distribution Center!
Post by: Alex548 on November 20, 2006, 03:17:00 PM
Was rummaging through my closets full of crap & found like 30 MCPX heatsinks. (IMG:style_emoticons/default/blink.gif)
Anyone interested in them? I'll sell individually or take the whole lot if you want. (IMG:style_emoticons/default/smile.gif)
I also found 4 brand new controller cases.
· 1 Clear green Rainbow S controller case
· 1 Smoke rainbow S controller case
· 2 official M$ blue S-cases
They're all brand new. Will take pix when I get home tonight.
I'd like to get rid of these as a complete package rather than individually.
Also just received another shipment of Philips VAD6011 dvd drives.
Will be adding new internals & testing them tonight as well.
U want one? $40 shipped USPS 2-3 day Priority Mail.
Also have a used Philips VAD6011 dvd drive. It's been cleaned & tested for an hour and works great.
$35 shipped USPS 2-3 day Priority on this one.
2 Adaptec AVC 1400 game bridge units still available. $20 shipped USPS 2-3 day Priority Mail.
Post by: MeKiwi on November 22, 2006, 01:41:00 PM
Post by: gymguy on November 23, 2006, 12:28:00 AM
Post by: Alex548 on November 23, 2006, 10:00:00 AM
I'm stuck at work on Turkey day. (IMG:style_emoticons/default/blink.gif)
Post by: Alex548 on November 24, 2006, 05:20:00 PM
Post by: Alex548 on April 10, 2007, 06:12:00 PM
You can get complete broken controllers from the llamma for $5 + shipping.
Will probably remove chips from the modded xboxes & sell them on ebay since I've received absolutely no interest for them here.
Post by: Nubbs on April 10, 2007, 08:36:00 PM
QUOTE
· 1.0 Motherboard with 12 pin header installed.
· DuoX2 Cromwell chip with X2_5035 BIOS and Cromwell FlashBIOS 3.03
· Stock 10 gig hard drive (slim seagate)
· DuoX2 Cromwell chip with X2_5035 BIOS and Cromwell FlashBIOS 3.03
· Stock 10 gig hard drive (slim seagate)
would you sell those seperate? if so pm me a price, paypal ready.
Post by: BlackWaterOp on April 11, 2007, 08:49:00 AM
Post by: Alex548 on April 11, 2007, 02:37:00 PM
QUOTE(Nubbs @ Apr 10 2007, 07:43 PM)
would you sell those seperate? if so pm me a price, paypal ready.
Those are all gone. . . sorry.
BlackWaterOp, make an offer.
Post by: capboy210 on April 11, 2007, 02:53:00 PM
Post by: hedgehogmd on April 14, 2007, 07:19:00 AM
Bump It Up And YGPM
Post by: Alex548 on April 15, 2007, 09:18:00 PM
Post by: Agrooreo on April 16, 2007, 04:45:00 PM
Post by: dweebs0r on May 04, 2007, 05:14:00 AM
-D
Post by: Arjun on May 06, 2007, 12:50:00 AM
Post by: Alex548 on May 08, 2007, 03:17:00 PM
Thanx for the bump guys.
Guess I should try to sell something. . . .
DuoX2 Modded xbox
· White case (w/a few blemishes)
· Blue Power/Eject LED's installed
· Stock 10gig Seagate hdd
· DVD drive works great, can't remember which drive it is though.
· Genuine M$ A/V cables (BRAND NEW OEM)
· Genuine M$ Power Cord
· Genuine M$ S-controller (BRAND NEW OEM)
$120 Shipped USPS 2-3 day Priority Mail.
Rare used S-controller
Not everyday will you find one of these.
Tested and works great, but shows signs of being used quite often.
$20 Shipped USPS 2-3 day Priority Mail.
Brand new Phoenix S-style controller (Officially Licensed by M$):
· Brand new
· XBL headset
· 2 month XBL trial card (probably expired)
$20 shipped USPS 2-3 day Priority Mail
Post by: Alex548 on May 09, 2007, 04:00:00 PM
Got an offer for $110 shipped on the white DuoX2 modded xbox.
Will give it another day for any higher offers.
Post by: BlackWaterOp on May 15, 2007, 05:15:00 AM
Post by: manatarms25 on May 15, 2007, 07:09:00 PM
I was about to paint my 12 year old a pink one
anyways I could use a cheap xbox for my basement I will check with you in a couple of days.
TX, JJ
Post by: Alex548 on May 16, 2007, 03:27:00 PM
I have a stock 1.6 that's only been used a few times. Still have the original box & possibly the manuals for it also. Let me know what you're looking to spend and I'll pull it out of the closet & dust it off for ya.
By the way. . . the white xbox is now sold. Thanx for all offers.
This post has been edited by Alex548: May 16 2007, 10:28 PM
Post by: VerbalVenom on May 20, 2007, 10:11:00 PM
Post by: DrPepperFan15 on May 21, 2007, 04:49:00 AM
Post by: Bdan629 on May 23, 2007, 10:07:00 AM
Post by: Alex548 on May 23, 2007, 02:07:00 PM
The 1.6 was purchased brand new by my wife.
We only used it when family came over so we could play Halo 2 on XBL together.
I've been the only owner. When we moved to a new place, we boxed it up & it's been sitting in the closet ever since. Never been softmodded, never been opened, rarely ever used at all.
Bdan629, sorry... no Sammy drives.
Post by: hedgehogmd on February 03, 2020, 04:14:00 PM
This post has been edited by hedgehogmd: Today, 12:16 AM
Post by: Alex548 on June 06, 2007, 01:46:00 AM
Well, I got a PM from someone asking for a couple misc. parts so I scoured through my closet o' crap for them.
While I was there, I found a few other items I'd like to get rid of....
Mixed pack of lasers. Some new, some used, some sold to me as new, but are actually refurbs:
· 6 Thomson lasers (TOP60)
· 2 Samsung SDG-605b lasers (SOH-D12)
· 5 Thomson dvd cog belts (fixes tray eject problem).
No clue if any of them work. For what I'm asking, it's worth a try if you have some DDE drives and a multimeter laying around.
$20 shipped USPS 2-3 day Priority Mail for all of them.
Miscellaneous crap. If you see anything you're interested in, shoot me a PM with an offer:
· Universal A/V cables (Xbox, GC, PSX. . . I think).
· Buttload of brand new xbox feet (just peel & stick).
· 2 Power/Eject PCB's (stock LED's).
· Molex power splitters (nice long cables for case mods).
· 2 Yellow DVD power cables
Have lots more miscellaneous crap I didn't bother to take pictures of.
Stuff like what you see in this picture is also available:
Post by: hedgehogmd on June 07, 2007, 06:32:00 PM
Post by: Alex548 on June 08, 2007, 05:15:00 PM
Also have copper MCPX heatsinks (20mm x 20mm x 15mm) with pre-applied thermal tape.
Still trying to get rid of those brand new xbox rubber feet too (just peel & stick).
still have tons of miscellaneous crap (and some cases).
Post by: MysticalMagnet on June 08, 2007, 07:26:00 PM
Post by: Bdan629 on June 11, 2007, 08:30:00 PM
Post by: hedgehogmd on June 17, 2007, 08:16:00 PM
Also YGPM
Post by: dylan_snyder09 on June 19, 2007, 06:13:00 PM
Post by: Alex548 on June 19, 2007, 07:06:00 PM
If you still want to buy the stock IDE cable, shoot me a PM and I'll give you my paypal info.
Post by: BlackWaterOp on June 19, 2007, 08:06:00 PM
Post by: hedgehogmd on June 24, 2007, 07:25:00 PM
Post by: potato10 on June 26, 2007, 08:47:00 PM
Post by: BlackWaterOp on June 26, 2007, 09:03:00 PM
QUOTE(potato10 @ Jun 26 2007, 11:23 PM)
hey man im looking for a 1.0/1.1 xbox daughterboard, you said you had a bunch of random crap so you may have one, just checking. let me know.
I just got mine from him last week. Very reasonable and quick shipping.
Post by: potato10 on June 26, 2007, 10:40:00 PM
Post by: Alex548 on June 27, 2007, 02:50:00 PM
Post by: Berzerker92 on June 27, 2007, 08:12:00 PM
Post by: Alex548 on June 28, 2007, 04:50:00 PM
We've pretty much only used this console as a backup for whenever guests come over (or more recently when our 360 takes a dump and we have to wait for M$ to fix it).
I also have the one below. . . stock1.0 internals w/12v fan mod and original Thomson drive (and I use it for XBL a few times a week). It's never given me a DDE in all these years:
Old photo (about a year ago) and the blue xbox jewel was sold a long time ago. It also has a few chips here & there from when I packaged it up & moved, but everything still works perfectly.
Post by: Alex548 on July 03, 2007, 04:39:00 PM
I still have more misc. stuff available including yellow dvd cables, dvd bezels, controller ports, maybe a power/eject board or two.
Also have some 1/4 watt, 100 OHM resistors (like 1,000 of these) if anyone is interested in those as well.
Oh, also have a used, but working Logitech wireless controller (black). Tested and works just fine, but left thumbstick no longer makes the clicking noise when you push it down. Guess it's a bit worn out . . . but everything still works.
I also found some more solid copper MCPX heatsinks (20x20x15mm). They have pre-applied adhesive so you simply peel & stick. Since they're 15mm high, you can't use these if you have a Philips dvd drive, an X3, or Xchanger v2.5 (or any other mod that blocks the MCPX on the motherboard.
Potato10, yes I still have at least 1 daughterboard left. Got rid of two of them today, but I remember seeing at least one more in one of my boxes o' crap.
Post by: Alex548 on July 06, 2007, 07:14:00 PM
Post by: Alex548 on July 08, 2007, 06:43:00 PM
Post by: patchesreusch on July 08, 2007, 08:10:00 PM
Post by: patchesreusch on July 09, 2007, 04:03:00 PM
Post by: Alex548 on July 09, 2007, 04:11:00 PM
Post by: patchesreusch on July 09, 2007, 05:44:00 PM
Post by: patchesreusch on July 11, 2007, 10:05:00 AM
Post by: Alex548 on July 11, 2007, 02:52:00 PM
Yeah, they work on RAM also considering they're actually called RAM sinks.
They're considered large BGA RAM sinks so they're a bit wider & taller than regular heatsinks (which makes them better).
Post by: patchesreusch on July 12, 2007, 06:46:00 AM
Post by: Alex548 on July 12, 2007, 12:26:00 PM
If you've ever removed the motherboard from a case, you'd notice you can't fit any heatsinks under it (no matter what size).
Post by: patchesreusch on July 12, 2007, 02:31:00 PM
Post by: Alex548 on July 14, 2007, 12:22:00 AM
QUOTE(patchesreusch @ Jul 8 2007, 07:46 PM)
have a 1.0 mobo my friends has no video so he might want a new one if i get that ill also get a mcpx meat sink
Guess what just came in the mail today? 1.0 xbox manufactured in January 2002.
Bad PSU, but everything else working just fine (including Thomson dvd drive).
U still interested in the motherboard? I can do $40 shipped USPS 2-3 day Priority Mail.
Also received a 1.6 xbox modified with X2.6CE. Would likely sell this one complete, but will entertain offers for specific parts. What I don't want is to get stuck with another empty case (I already have at least 10 empty cases).
QUOTE(patchesreusch @ Jul 12 2007, 02:07 PM)
i plan on buying 3 heatsinks ill also buy a laser if they make the dvd drive read cd/dvds
I don't have any lasers left. . . sorry.
Post by: Static X on July 14, 2007, 01:25:00 AM
Post by: Alex548 on July 14, 2007, 12:13:00 PM
I received it from ebay and it was missing the external bank selector switch on the X2.6 so I just added one & everything is working fine (including the Philips VAD6035 dvd drive).
Case is in decent condition and the internals were very clean so it appears to have been well taken care of. I also found out it was modified by fellow moderator FallsInc (that's what it says on the startup screen).
. . . small world. Post by: potato10 on July 14, 2007, 11:33:00 PM
QUOTE(Alex548 @ Jun 27 2007, 05:26 PM)
^ Yep. Have at least 5 more. How many do you need?
hey really sorry about the late reply because i didnt know if i needed one but i do. so ill take one. and also do you have any 1.2 mobos? if not what do you have?
Post by: patchesreusch on July 14, 2007, 11:56:00 PM
edit: how much for a d0 wire or tsop flash?
Post by: Grim187 on July 15, 2007, 12:15:00 AM
Post by: FOOL BUN GIE on July 15, 2007, 07:24:00 AM
Post by: Alex548 on July 15, 2007, 05:50:00 PM
QUOTE(potato10 @ Jul 14 2007, 11:09 PM)
hey really sorry about the late reply because i didnt know if i needed one but i do. so ill take one. and also do you have any 1.2 mobos? if not what do you have?
I have a 1.0 Motherboard, a 1.4 motherboard, and several xboxes (1 stock, 1 modified w/X2.6, 1 custom paint & stock internals, 1 custom paint & modified w X2.6CE). Let me know what you need. I can even supply pics if you ask for a specific item.
QUOTE(patchesreusch @ Jul 14 2007, 11:32 PM)
i going to ask my friend tomorrow if h want that mobo if not i might take it but ill also buy the heat sinks tomorrow
edit: how much for a d0 wire or tsop flash?
I don't do TSOP flashes, but if you're planning on installing a chip onto this motherboard, I can install the pinheader and D0 wire at no extra cost. Just let me know whether you require a 12 pin header or a 16 pin header. . . I have both sizes.
Hint: 12 pin header works with Aladdin, DuoX2, Xchanger v2.5, etc. . .
16 pin header works with X2.6, X3 (X3CE), and others.
Grim187, YGPM
The following was sent to me via PM land. Figured I'd reply AND post a portion of my reply here:
QUOTE
Hey alex I was wondering if you could give me a list of all the xbox you have for sale.
Also could you give a little explanation about each like modded or not modded works on live.. Its version..opened or not opened.. What is on it..etc...
Also could you give a little explanation about each like modded or not modded works on live.. Its version..opened or not opened.. What is on it..etc...
Here's what I currently know (and what I remember):
· 1.0 xbox. Stock internals, but has a Mustang Yellow automotive paint job. It's a professional paint job and was wet sanded, buffed, clear-coated, then finally buffed/polished. The case was painted by manatarms25. It's been on Xbox Live, but hasn't been banned. I use it a few times a week to play Halo 2 online. Has a Thomson dvd drive and 12v fan mod.
It also has a jewel hole pre-cut (before it was painted), but no jewel . . . just never bothered to put one in.
· 1.0 stock xbox. Stock Thomson dvd drive in it. Everything works just fine. No clue whether it's ever been on xbox live since I received this from Ebay with a bad PSU. PSU has been replaced and everything works just fine now.
· X2.6CE modified xbox. Painted blue by manatarms25 (just like the Mustang Yellow xbox). Stock hard drive and the DVD drive is a Philips VAD6035. Everything is working great. We use it almost daily in my son's room so he can watch kid movies. No clue if it's ever been on Xbox live, but I installed the chip personally and I've never taken it online. I'm not the original owner of the internals so I don't know if previous owners ever took it online. Almost forgot, this also comes with a "Mod Inside" jewel. . . not installed though.
· 1.6 xbox with X2.6CE. Stock case and no hard drive at the moment. Not sure if it's ever been on xbox live before. The chip install appears to have been done by FallsInc. I received this from someone on ebay the other day stating it wasn't working, but the only thing wrong was it was missing the external bank switch for the X2.6CE. I installed a spare one and it's working just fine. Has a VAD6035 dvd drive in it and works just fine.
· 1.6 stock xbox in near perfect condition. Has a VAD6035 dvd drive. It has been on XBL, but is not banned. I purchased it in November 2004 brand new and have rarely used it. It spends most of it's time in my closet, but I pull it out whenever my xbox 360 dies and my wife uses it while we wait for M$ to return our 360. This one has never been opened and all seals are still intact.
Post by: IJTF_Cinder on July 15, 2007, 10:04:00 PM
I'm looking for a stock Xbox, PM me with what you're looking to get for the stock 1.6 (I'm in Canada, not sure if you'd remember). Wife wants one in the bedroom for watching movies n stuff with XBMC.
Post by: potato10 on July 17, 2007, 08:36:00 AM
QUOTE
I have a 1.0 Motherboard, a 1.4 motherboard, and several xboxes (1 stock, 1 modified w/X2.6, 1 custom paint & stock internals, 1 custom paint & modified w X2.6CE). Let me know what you need. I can even supply pics if you ask for a specific item.
do you have a 1.0 psu with the mobo? if not how much for the mobo alone.
Post by: Alex548 on July 17, 2007, 11:06:00 AM
BTW, the 1.0 motherboard has been sold.
Post by: Alex548 on July 22, 2007, 07:00:00 PM
1.0 motherboard
1.4 motherboard
Still available:
Everything else I recently posted.
Post by: patchesreusch on July 24, 2007, 01:57:00 PM
Post by: Alex548 on July 24, 2007, 03:49:00 PM
When my hand's aren't all shaking from low blood sugar... I usually solder to the top d0.
It's pretty easy actually. Just use 30 gauge kynar wrapping wire and tin the wire before inserting it into the d0 via.
Only regret on your motherboard is that I didn't exactly install the header pin perfectly.
The solder job is good (go ahead & check it). . . it just wasn't completely flush with the motherboard.
Ah well, things like that happen when I'm soldering at like 3:00am
Anyway, the header pin and the d0 are on there pretty good and I tested the motherboard with an X2.6CE prior to shipping to make sure everything is working great.
Since this is a b/s/t... guess I should post an update or something:
$135 shipped USPS 2-3 day Priority Mail:
QUOTE
X2.6CE modified xbox. Painted blue by manatarms25 (just like the Mustang Yellow xbox). Stock hard drive and the DVD drive is a Philips VAD6035. Everything is working great. We use it almost daily in my son's room so he can watch kid movies. No clue if it's ever been on Xbox live, but I installed the chip personally and I've never taken it online. I'm not the original owner of the internals so I don't know if previous owners ever took it online. Almost forgot, this also comes with a "Mod Inside" jewel. . . not installed though.
$100 shipped USPS 2-3 day Priority Mail:
QUOTE
1.6 xbox with X2.6CE. Stock case and stock hard drive. Not sure if it's ever been on xbox live before. The chip install appears to have been done by FallsInc. I received this from someone on ebay the other day stating it wasn't working, but the only thing wrong was it was missing the external bank switch for the X2.6CE. I installed a spare one and it's working just fine. Has a VAD6035 dvd drive in it and works just fine.
Both those above will include genuine M$ A/V cable, genuine M$ power cord, and either a like new S-controller or a like new Duke (your choice). I also pay for the shipping insurance to protect your purchase.
Quick edit:
Here's a picture of the blue painted xbox w/"Mod Inside" jewel:
I can supply you with more pictures if necessary.
BTW, the lid was not screwed down in that picture. . . just in case you were wondering why front panel looked funny.
Post by: patchesreusch on July 24, 2007, 06:23:00 PM
QUOTE(Alex548 @ Jul 24 2007, 05:25 PM)
Only regret on your motherboard is that I didn't exactly install the header pin perfectly.
The solder job is good (go ahead & check it). . . it just wasn't completely flush with the motherboard.
Ah well, things like that happen when I'm soldering at like 3:00am
noticed but no biggie
Post by: Alex548 on July 26, 2007, 03:59:00 PM
Includes genuine A/V cables, power cord, and like new S-controller (used for 2 weeks).
QUOTE
1.6 stock xbox in near perfect condition. Has a VAD6035 dvd drive. It has been on XBL, but is not banned. I purchased it in November 2004 brand new and have rarely used it. It spends most of it's time in my closet, but I pull it out whenever my xbox 360 dies and my wife uses it while we wait for M$ to return our 360. This one has never been opened and all seals are still intact.
Post by: Alex548 on July 31, 2007, 04:27:00 PM
New items available:
· 1.0 Motherboard w/case & extras (see below): $45 shipped USPS 2-3 day Priority Mail.
· 1.0/1.1 PSU $20 shipped USPS 2-3 day Priority Mail.
Selling the 1.0 motherboard w/the case because I have way too many cases sitting here and I need to get rid of them. The case will include top, bottom, DVD bezel, front panel, power/eject buttons, stock case fan, hdd caddy, dvd caddy, motherboard screws, and even a stock case fan.
Still available:
$135 Shipped USPS 2-3 day Priority Mail:
Comes with M$ A/V cables, Power cord, and brand new aftermarket Crystal S-style controller.
QUOTE
X2.6CE modified xbox. Painted blue by manatarms25 (just like the Mustang Yellow xbox). Stock hard drive and the DVD drive is a Philips VAD6035. Everything is working great. We use it almost daily in my son's room so he can watch kid movies. No clue if it's ever been on Xbox live, but I installed the chip personally and I've never taken it online. I'm not the original owner of the internals so I don't know if previous owners ever took it online. Almost forgot, this also comes with a "Mod Inside" jewel. . . not installed though.
$85 shipped USPS 2-3 day Priority Mail:
Comes with M$ A/V cables, Power cord, and like new S-controller (used only 2 weeks)
QUOTE
1.6 stock xbox in near perfect condition. Has a VAD6035 dvd drive. It has been on XBL, but is not banned. I purchased it in November 2004 brand new and have rarely used it. It spends most of it's time in my closet, but I pull it out whenever my xbox 360 dies and my wife uses it while we wait for M$ to return our 360. This one has never been opened and all seals are still intact.
Adaptec Gamebridge AVC-1400. . . $10 Shipped USPS 2-3 day Priority Mail.
Post by: Alex548 on August 01, 2007, 05:56:00 PM
