xboxscene.org forums

Shopping Forums => Modchip Installers / Firmware Flashers => Topic started by: APE on April 24, 2012, 09:49:00 PM

Title: Wtb: Glitching Service For My Trinity
Post by: APE on April 24, 2012, 09:49:00 PM

I've put modchips in damn near everything and got a big block Jasper to glitch properly but I've had it trying to get my Trinity to do the same.

I've got the NAND dumped and the ecc file flashed to the NAND; I don't have the CPU key yet (xell has never booted). I have two different x360glitch chips that I can't seem to get just right and I have previously tried the first iteration of the Matrix glitch chip with no luck.

All I need you to do is get this sucker glitching like clockwork. PM me your price and turn around times as well as if you require something beyond the mobo and the x360glitch chip I have.

Title: Wtb: Glitching Service For My Trinity
Post by: Mack702 on April 24, 2012, 10:11:00 PM

PM'd On BG.

Title: Wtb: Glitching Service For My Trinity
Post by: deilzfcjk on April 24, 2012, 11:28:00 PM

Yo, I can look at it. Are you close to San Francisco?

Title: Wtb: Glitching Service For My Trinity
Post by: Definitely Wapner on April 25, 2012, 05:44:00 AM

Hey. I may be able to help without even needing your xbox.

Have you tried changing the cap value? The onboard is 220pf, but boots best with a 270pf cap. I've done half a dozen systems with the "x360glitch" chips you can buy from dealextreme and I've always had to change the cap.

Also, did you successfully program the glitcher? These are a little different to program.

Also, just follow the same wire lengths as TX does for their coolrunner and you'll never have an issue.

I've had people turn their noses up at systems I've installed the x360glitch in, but with some work, you can get them booting consistently in 5-15 seconds.