Post by: flymanxxx on May 12, 2011, 03:00:00 AM
SLIM 9504 - £15
My nr. 07879158355
Post by: curtis1991 on May 15, 2011, 09:13:00 AM
Post by: flymanxxx on May 15, 2011, 10:49:00 AM
QUOTE(curtis1991 @ May 15 2011, 04:13 PM) 
Where abouts in London are you?
I'm living in North East (Enfield)
Post by: flymanxxx on September 19, 2011, 02:53:00 PM
QUOTE(flymanxxx @ May 12 2011, 10:00 AM)
ALL PHAT 360 DRIVES -£15
SLIM 9504 - £20
My nr. 07879158355
UPDATE
SLIM with MXIC - £20
SLIM with Winbond - £30
Post by: sudeki300 on September 27, 2011, 02:30:00 PM
Post by: flymanxxx on September 30, 2011, 02:18:00 PM
Post by: flymanxxx on October 02, 2011, 05:12:00 PM
Nr 07714443828
Send me a text
This post has been edited by flymanxxx: Oct 3 2011, 12:19 AM
Post by: flymanxxx on October 08, 2011, 04:04:00 PM
JTAG Installation - £35
LT+ 2.0 for Slim -£20 (£30 for unlock winbond)
Delivery service also available now.
For more info text me.
Tel. 07744413828
This post has been edited by flymanxxx: Oct 8 2011, 11:20 PM
Post by: flymanxxx on October 15, 2011, 02:43:00 AM
Post by: flymanxxx on October 19, 2011, 06:28:00 AM
Post by: flymanxxx on October 23, 2011, 05:31:00 PM
Post by: RAAAMESH on October 28, 2011, 10:58:00 AM
QUOTE(flymanxxx @ Oct 24 2011, 12:31 AM) 
Reset Glitch Hack Soon...
sent a text earlier, looking forward to this (IMG:style_emoticons/default/smile.gif)
Post by: flymanxxx on October 29, 2011, 08:06:00 AM
QUOTE(RAAAMESH @ Oct 28 2011, 05:58 PM)
sent a text earlier, looking forward to this
When I'll get the QSB and CoolRunner, I'll start doing the RGH...
Post by: RAAAMESH on November 04, 2011, 08:56:00 PM
QUOTE(flymanxxx @ Oct 29 2011, 02:06 PM)
When I'll get the QSB and CoolRunner, I'll start doing the RGH...
nice to know you will be using the recommended QSB =), any ideas of pricing yet?
This post has been edited by RAAAMESH: Nov 5 2011, 04:02 AM
Post by: flymanxxx on November 05, 2011, 12:29:00 PM
Post by: RAAAMESH on November 13, 2011, 08:36:00 PM
, would you do a deal if i bring 2 consoles? 
Post by: flymanxxx on November 14, 2011, 03:50:00 PM
QUOTE(RAAAMESH @ Nov 14 2011, 03:36 AM)
!! still waiting on uk stock for the qsbs
, would you do a deal if i bring 2 consoles? Yes, I could do it for u.
Post by: flymanxxx on November 15, 2011, 01:46:00 PM
QUOTE(flip2000b @ Nov 15 2011, 08:06 PM)
Hi mate,
Based in Harlow so can easily get a train to Enfield. You do a day time flash service, I want to drop it off tomorrow (16/11) ideally and then go for a quick beer local before picking it up an hour later.
Is that possible?
Thanks
Phil
Hi, unfortunately I can only do it after 6.30 pm during the week, but you can come any time at weekends. You can drop it off, of course and leave it but you might not have the time for a beer
, so you may want to wait until I finish it. Cheers.Post by: flymanxxx on November 19, 2011, 02:22:00 AM
LT+ 2.0 for SLIM with MXIC £20
LT+ 2.0 for SLIM with WINBOND £30
Tel. 07714443828
Post by: flymanxxx on November 20, 2011, 03:29:00 PM
Post by: flymanxxx on November 22, 2011, 04:00:00 PM
Pcb with WINBOND
Post by: flymanxxx on November 24, 2011, 02:18:00 PM
Post by: curtis1991 on November 24, 2011, 04:44:00 PM
Post by: flymanxxx on November 25, 2011, 02:07:00 AM
I have the QSB's...ready for the weekend.
Post by: RAAAMESH on November 26, 2011, 06:35:00 AM
Post by: flymanxxx on November 26, 2011, 03:30:00 PM
QUOTE(RAAAMESH @ Nov 26 2011, 01:35 PM)
Forgot to say its okay to wipe the hard drive.
Ok, that's fine mate. Didn't need to do it, but thanks any way.
Post by: RAAAMESH on November 26, 2011, 06:26:00 PM
Post by: flymanxxx on November 27, 2011, 02:13:00 PM
Post by: RAAAMESH on November 27, 2011, 03:13:00 PM
Post by: Tin Hammerhead on November 29, 2011, 03:11:00 PM
Cheers.
Post by: RAAAMESH on November 30, 2011, 05:34:00 AM
Post by: RAAAMESH on December 05, 2011, 02:20:00 AM
1 out of 2 of my Xboxes did not power after collecting them and driving back home, I had a look inside the Xbox and there was a loose green wire on the back centre of the motherboard. I contacted him again and was told he could fix it so I drove down again and was asked to leave it to have a check.
Was contacted back and was told the motherboard had been exposed to too much tension and the nand was unreadable. was told that it was my fault for exposing too much power to it, I guess I did try 2 different power cables as it didn’t boot with its original cable before I had looked inside. I called back after getting that message and was talking about what happened and if he maybe could move the cool runner to a different console for free but was asked it would cost another (after haggling) £15 to move it over console.
Phoned back 2 minutes later after discussing it with family and made it clear on the phone that I would want a full £50 refund and that he can take out the cool runner. Was told its ok and was told to come tomorrow.
When arriving the day after he showed me the motherboard and he said maybe I knew someone who can fix it he proceeded to pack it and when handing it over I asked for the money, at first he said no refund then I began to talk about our phone call and he mentioned his English is not good and he thought he wanted me to put it in another console then proceeded to offer a £15 refund which I declined and asked for full and said I made it clear on the phone and told him to take the cool runner out.
After the cool runner was taking out he offered £40 and said what about his work (what about my Xbox?) I then persisted for the full refund which was finally given.
So in summary, when I went to collect he showed me fsd boot on one and xell (after a few boots) on the other (which is now dead). I guess the wire loosened during transport It was very difficult to get a refund as it seemed his understanding of the English language seemed to deteriorate as I asked for one. His tone fluxuated slightly from apprehensive to apathetic as I was asking for the refund
I have got my older consoles (xbox1 etc) modded from modders from xboxscene and when these other modders came to my house and the mod failed in some way they offered to take it away and bring it back fixed otherwise they would give me a different console.
Now looking at my broken xbox there are some screws and an eject button missing. Other than that the other xbox works fine but in future I will get my RGH done via post\elsewhere somewhere where they have more experience\electronics knowledge as I spent as much traveling to this location. If you are a quite/introverted person and you get a problem you will get conned\be at a greater loss.
flymanxxx if you are unhappy with this review please tell me as i am willing to discuss it with you and other members here
This post has been edited by RAAAMESH: Dec 5 2011, 10:24 AM
Post by: flymanxxx on December 05, 2011, 01:42:00 PM
When you came, I checked both Xboxes and they were working perfectly. After three days, I receive a PM from you that one of them is not functioning. That is after you had told me through a comment a few hours after I had given them to you that you looked inside the console and that everything was done nicely and clean. So, total contradiction.
QUOTE(RAAAMESH @ Nov 27 2011, 10:13 PM)
.... i looked inside one of my Xboxes it looks very neat and tidy very professional mod and quick solder board ...
Now, how could I know what happened to that console in three days?
It is not my fault if someone checks my work by opening their console and maybe, accidentally, ruins something and I find it really rude that they could think I broke it or didn't do it well, when it's them that are and express their satisfaction with my work initially.
I've done 10 RGH until now and never had a problem of this sort.
As for my English, I admit, it is not my first language, but I don't see why that should consist a problem.
Post by: RAAAMESH on December 07, 2011, 12:24:00 AM
i dident play it for 3 days as i was using the one console to learn how FSD works and get my setting correct as that console dident have a hard drive yet
you don’t know who I am so I guess it would be pointless to say "why would i lie to you." I’m not trying to sell you a service I’m just a regular guy
There’s nothing wrong with your English if nothing goes wrong with the job i found it hard getting a refund back where i made it clear to you on the phone and you first brought about the subject of your english the next day as i was asking for the refund
also the other xbox works fine
This post has been edited by RAAAMESH: Dec 7 2011, 08:30 AM
Post by: yee_tsou on December 14, 2011, 08:11:00 AM
Post by: flymanxxx on December 15, 2011, 12:58:00 PM
For those who need my services, I will only be available after the 9th of January.
Happy Holidays to everyone!
Post by: flymanxxx on January 09, 2012, 11:23:00 AM
Post by: flymanxxx on January 11, 2012, 03:35:00 PM
I will be more than happy to do it once LT 3.0 for slim is released
Post by: flymanxxx on January 17, 2012, 03:52:00 PM
Post by: flymanxxx on January 24, 2012, 11:43:00 AM
Post by: flymanxxx on January 28, 2012, 01:27:00 AM
Post by: flymanxxx on January 28, 2012, 09:38:00 AM
Post by: flymanxxx on February 03, 2012, 01:28:00 PM
Post by: flymanxxx on February 10, 2012, 12:53:00 AM
Post by: flymanxxx on February 11, 2012, 12:46:00 AM
Post by: flymanxxx on February 15, 2012, 12:59:00 AM
Post by: flymanxxx on February 17, 2012, 01:12:00 PM
QUOTE(flip2000b @ Feb 17 2012, 02:54 PM)
Hi Sebastian,
Are you around tomorrow all day, hope to be with you about 10:30am to flash to 3.0
Also I have updated to the latest dash (released this week) hope that doesn't cause a problem.
Thanks
Hi,
You can come anytime between 10am and 1pm tomorrow, I am busy the rest of the day.
It would've been better to put the firmware to stock and then flash it to LT 3.0. Lots of people have gone live without any problems, but it would be better to wait for an answer from C4eva.
Post by: flymanxxx on February 19, 2012, 01:10:00 PM
RGH for £45 only
Post by: flymanxxx on February 22, 2012, 03:28:00 PM
QUOTE(LeedsLad @ Feb 22 2012, 03:41 PM)
Shame to hear you cannot RGH a phat xbox from 2006 (non-HDMI).
Very soon mate...
Post by: flymanxxx on March 06, 2012, 12:56:00 AM
Post by: flymanxxx on March 08, 2012, 12:58:00 AM
Post by: flymanxxx on March 13, 2012, 03:28:00 PM
Post by: flymanxxx on March 27, 2012, 12:41:00 AM
Post by: flymanxxx on March 31, 2012, 12:49:00 PM
Post by: flymanxxx on April 16, 2012, 09:35:00 AM
Post by: flymanxxx on May 12, 2012, 10:36:00 AM
Post by: jagz321 on June 04, 2012, 03:59:00 PM
Very professional and excellent prices
many thanks Seb, I'll revisit once I get my hands on a decent moddable slim for that RGH !
cheers!
Jags