xboxscene.org forums

OG Xbox Forums => Hardware Forums => General Hardware/Technical Chat => Topic started by: Renegade56 on October 30, 2007, 02:06:00 AM

Title: Xbox Wont Turn On
Post by: Renegade56 on October 30, 2007, 02:06:00 AM

I installed a modchip the other day. It wouldn't turn on after the install so I took everything out and cleaned everything up. Still won't turn on. Ive checked all around to make sure I didn't burn off a small resistor or anything but everything seems intact. I've verified with a multimeter that the power supply is working.

I was a little harsh on the LPC holes with my soldering iron, but each LPC hole passed a continuity test with its corresponding trace. I don't know what else to look for.

Any ideas?

Thanks

Title: Xbox Wont Turn On
Post by: Renegade56 on February 02, 2020, 05:18:00 PM

thanks for the help. I think the problem is with the LPC. I know that I may burnt the board alittle and it looks like I screwed up some of the holes.

What is a good way of testing if the LPC is the problem?

Top:
(IMG:http://losteclipse.com/top.jpg)

Bottom:
(IMG:http://losteclipse.com/bottom.jpg)