xboxscene.org forums

Off Topic Forums => Other Platforms => PSP Forums => Topic started by: NewAgePSX on April 29, 2006, 11:36:00 PM

Title: Psp Led Chaser (2 Banks 6 Ledsper Bank W/3 Patterns And Off)
Post by: NewAgePSX on April 29, 2006, 11:36:00 PM

Anyone interested? This mod is for peeps with a transparent type aftermarket faceplate. Such as Clear, Blue, Red.

Chips used: Parallax SX28 SSOP
Its got 3 different LED patterns. Night Rider is one. Also you can turn the display off. The pattern setting and power funtion is controlled via the (HOLD) switch. 1 quick on & off of the hold button set the display into the next pattern. On the 4th on & off press on the hold botton the display will be disabled. The next press starts the hole cycle all over again.

Draws about 30ma (Not Constant)
No problem being powered by the PSP's low battery voltage.

You need 12-805 Type SM LED's (Red, Blue, ?)

Here is the Circuit Board Layout: http://www.chicagogamewerks.com/tutpics/im...ledtemplate.jpg

I have the tutorial on how to make a circuit board also. Will post tomorrow.
I also have Many pics on how to install this mod. Belive it or not. Its just a matter of running the wires which is really not that hard. The hard part is disassembling just about the hole PSP to get it in. Again its really not that bad.

Here's what the finished Circuit board looks like http://www.chicagogamewerks.com/tutpics/images/DSC00567.JPG

More Pics tomorrow.

This post has been edited by NewAgePSX: Apr 30 2006, 06:51 AM

Title: Psp Led Chaser (2 Banks 6 Ledsper Bank W/3 Patterns And Off)
Post by: ILLusions0fGrander on April 30, 2006, 12:00:00 AM

sounds like it would look cool but be distracting while playing... if you got any finished pics, i wouldnt mind seeing them though.

Title: Psp Led Chaser (2 Banks 6 Ledsper Bank W/3 Patterns And Off)
Post by: NewAgePSX on April 30, 2006, 03:12:00 PM

Insted of posting all the pics here you can view the hole projct here. PSP LED Chaser
Its almost 10 megs of pictures so it may load slow if you havea dialup connection.

Title: Psp Led Chaser (2 Banks 6 Ledsper Bank W/3 Patterns And Off)
Post by: buttface96 on May 01, 2006, 06:15:00 AM

where do u mount this in the psp? the circuit board is nice

Title: Psp Led Chaser (2 Banks 6 Ledsper Bank W/3 Patterns And Off)
Post by: NewAgePSX on May 01, 2006, 07:41:00 PM

Its sandwiched between the mem stick board and the case. Its a fairly easy install. I am working on the installation pics and they will be posted in a day or so. I did add a short movie of the prototype I made to the above link. The proto type only used 10 leds. The revised version has 12 leds.