xboxscene.org forums

Off Topic Forums => Other Platforms => Personal Computer (PC, MAC, etc) General Talk => Topic started by: BenJeremy on April 01, 2004, 01:27:00 AM

Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: BenJeremy on April 01, 2004, 01:27:00 AM
I've got a Tyan KT7 2390 motherboard here and I plan to use a Duron 1.2ghz CPU (200mhz FSB), but I can't fnd anybody who's pushed the board that much with a Duron.

Anybody here have any experience with it? Worst case, I guess, I have to buy another M/B... I'd just like to upgrade my son's P3 Celly 800mhz system to something a bit faster.
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: CypherTheory on April 02, 2004, 08:16:00 AM
biggrin.gif well the board can handle it, but i wouldnt be to sure about the duron, if i were you i would go to toms hardware and have a look at the articles there but i wouldnt have thought that it would have been able to handle a double in the front side bus, without some serious cooling and playing around with the voltages and i certainly wouldn't belive it would remain stable, try 133 or 166 instead.

sorry if thats eerything u already knew

good luck (and if it all goes wrong i want pics  biggrin.gif )
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: oswald on April 02, 2004, 09:02:00 AM
I ran a 1ghz duron in my abit kt133 mobo for about a year without issue, but as always, your mileage may vary.
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: EgoX on April 02, 2004, 09:17:00 AM
That chipset can handle 200mhz fsb I've seen these boards handle up to 1.4 gig cpu's , so it should be a gogo.

I assume you still have the manual handy for reference to the jumper settings, bare in mind if you plan to set the fsb + mult in the bios instead of setting jumpers you may need a firmware upgrade.
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: CypherTheory on April 02, 2004, 09:46:00 AM
ph34r.gif

the duron in question is afaik a 100mhz fsb, and they arnt exactly cool either

Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: EgoX on April 02, 2004, 11:34:00 PM
I get where your coming from but as far as i remember the fsb rating is effectively double what you run the chip on ie 200fsb runs on 100mhz.

or have i got my wires crossed?
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: CypherTheory on April 03, 2004, 01:21:00 AM
yeah u are right it depends if we are talking about the actual freq. or the ddr freq, which is double, im sorry i thought u were talking about setting the fsb from 100mhz to 200mhz? will u be overclocking this chip?
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: BenJeremy on April 03, 2004, 05:02:00 AM
Thanks for the replies... no overclocking going on.

I figured it should work, but I've been in the intel camp for quite a few years and missed the Athlon buzz.

Just need a decent system so my son can play UT2k4 with some good graphics. My boss gave me the motherboard, a 256MB DIMM and a GeForce3, so it should go together nicely.
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: CypherTheory on April 03, 2004, 08:24:00 AM
biggrin.gif

good luck with that it sounds like its a fine setup
Title: 1.2ghz Duron And Via Kt-133 Chipset Mb?
Post by: BenJeremy on April 06, 2004, 01:46:00 PM
Well, just a note: Yes, the Duron 1.2ghz works great on this motherboard. It recognized it as a 1200mhz Duron right off the bat.

With a little luck, my son will be playing UT2k4 on this machine by the weekend.