xboxscene.org forums

OG Xbox Forums => Xbox Online Gaming (Xbox Live, Xlink, and others) => XLink Kai Forum => Topic started by: shaggy32 on January 12, 2004, 12:50:00 PM

Title: Help Configuring
Post by: shaggy32 on January 12, 2004, 12:50:00 PM

Here's my setup:

PC Hardwired to Linksys Wireless Router (WRT54G)
Xbox with Linksys Wireless Game Adapter (WAG54G)
Xlink 2.2.4 with Wincap 3.01

Here's My xtest:

[2:30:11 PM] X-Link configuration inspection begins..

[2:30:11 PM] Attempting Socket Bindings..
[2:30:11 PM] Attempting X-Link Data Stream Bind (34518 UDP)..
[2:30:11 PM] Attempting X-Link Data Stream Bind (34518 UDP)..
[2:30:11 PM] Attempting XBConnect Hosting Stream Bind (8602 UDP)..

[2:30:11 PM] Attempting Port Loobpack Tests..
[2:30:11 PM] 34518 -> OK (192.168.1.100)
[2:30:11 PM] 34519 -> OK (192.168.1.100)
[2:30:11 PM] 8602 -> OK (192.168.1.100)

[2:30:11 PM] Initialising WinPCap control layer..

[2:30:11 PM] Enumerating WinPCap NICs:
[2:30:11 PM] NVIDIA nForce MCP Networking Controller Driver (MS's Packet Scheduler) - DeviceNPF_{8DAC9443-A6C7-42D7-93C1-E29866A8DD83}

[2:30:11 PM] Checking IsGood status of NICs:
[2:30:11 PM] NVIDIA nForce MCP Networking Controller Driver (MS's Packet Scheduler) =  1

[2:30:11 PM] Attempting Promiscuous Control:
[2:30:11 PM] NVIDIA nForce MCP Networking Controller Driver (MS's Packet Scheduler) - STARTED
[2:30:11 PM] NVIDIA nForce MCP Networking Controller Driver (MS's Packet Scheduler) - STOPPED

[2:30:11 PM] MAC Capturing:
[2:30:11 PM] Listening 5 seconds on NVIDIA nForce MCP Networking Controller Driver (MS's Packet Scheduler)

[2:30:16 PM] UPnP Enumeration (WAIT):
[2:30:16 PM] UPnP Init failed.. skipping enumeration..

[2:30:16 PM] XServer External Test:
[2:30:16 PM] Sending request..
[2:30:16 PM] Waiting 5 seconds for reply..
[2:30:16 PM] XServer accepted connection..
[2:30:16 PM] 34518 -> OK (216.40.247.50)
[2:30:16 PM] 34519 -> OK (216.40.247.50)
[2:30:16 PM] Server -> Sent 3 test packets to 64.172.180.50 - HTTP response was 64.172.180.50 , full was

[2:30:21 PM] Tests complete... post in the forum if you need to.


I see that the UDPs failed, but I forwarded the ports in the router's setup explained by HERE.  On some games like Crimson Skies and Halo, I see traffic incoming and outgoing.  But joing is another story.

Any help or suggestions would be much appreciated.  THANKS!!!

This post has been edited by shaggy32: Jan 12 2004, 09:36 PM <

Title: Help Configuring
Post by: dfunked on January 12, 2004, 01:59:00 PM

Is there anything in the WET11 options of XLink?

Try clearing it if there is and have a shot...  <

Title: Help Configuring
Post by: shaggy32 on January 12, 2004, 02:59:00 PM

Solved by dfunked!!!!

Just by clearing the MACs in xlink, I can now get my ass kicked in games...  <

Title: Help Configuring
Post by: J Do on February 20, 2004, 09:06:00 PM

yeah well what if there is nothing in the MAC's???  <

Title: Help Configuring
Post by: Speen05 on February 21, 2004, 08:18:00 PM

I have the Linksys wireless access point and the best bridge that I have found is the D-Link DLW-810. I tried messing around with the Linksys bridge but had no success. The D-Link was no problem, just plug it in and it worked perfectly.  <