Post by: Xbox-Scene on February 19, 2011, 11:43:00 AM
Team Xecuter POGO MO THOIN Homebrew Liteon Probe No Cuts / No Solder *Update* Posted by XanTium | February 19 13:43 EST | News Category: Xbox360 |
| From team-xecuter.com: Quote
*Update* Hack your CK3 Probe to be a POGO MO THOIN No Power Clips Required :) Via team-xecuter.com: Quote
Official Site: team-xecuter.com(1) | team-xecuter.com(2) Download Schematics: here[team-xecuter.com] |
Post by: Xmodss on February 19, 2011, 12:48:00 PM
says it all
Post by: DARKFiB3R on February 19, 2011, 01:04:00 PM
(pronounced pogue muh ho-in)
Post by: syntaxerror329 on February 19, 2011, 01:09:00 PM
Now i am a bit unsure of the steps. I am guessing that you connect this device first. Then start sending intro's in JF and then power the drive? I assume you then remove it and then read the drive?
I guess i better test it out and report back.
Post by: DARKFiB3R on February 19, 2011, 01:15:00 PM
Post by: ZerOneX on February 19, 2011, 01:15:00 PM
Post by: DARKFiB3R on February 19, 2011, 01:23:00 PM
Post by: tomasvilda on February 19, 2011, 01:28:00 PM
QUOTE(DARKFiB3R @ Feb 19 2011, 10:23 PM) 
Can we just call this a PMT for short? Fuck typing pogo mo thoin all the time.
or KMA (Kiss My Ass), when we will have MRA and KMA method
Post by: DARKFiB3R on February 19, 2011, 01:33:00 PM
QUOTE(tomasvilda @ Feb 19 2011, 08:28 PM) 
or KMA (Kiss My Ass), when we will have MRA and KMA method LOL I like it. "You need to KMA with a PMT"
Post by: carranzafp on February 19, 2011, 01:44:00 PM
Anyway, was time to stop crying for the truck of clips and move ahead, good, its the minimus you can do
Post by: No_Name on February 19, 2011, 01:58:00 PM
Post by: DARKFiB3R on February 19, 2011, 02:08:00 PM
QUOTE(carranzafp @ Feb 19 2011, 08:44 PM)
o.O what happened with the "unsafe" of this method? ohh I guess now tx have it is not unsafe. uber cool !!
Anyway, was time to stop crying for the truck of clips and move ahead, good, its the minimus you can do
It's not safe? linkage plz.
Post by: JackintheXbox on February 19, 2011, 02:11:00 PM
QUOTE(DARKFiB3R @ Feb 19 2011, 07:08 PM)
It's not safe? linkage plz.
Thats what TX forums used to say
Post by: carranzafp on February 19, 2011, 02:15:00 PM
QUOTE(DARKFiB3R @ Feb 19 2011, 10:08 PM)
It's not safe? linkage plz.
QUOTE(JackintheXbox @ Feb 19 2011, 10:11 PM)
Thats what TX forums used to say
Yes until they figured out how to copy it. But Im dissapointed I thought they were anouncing earlier
Hey Jungleboys, congratulations for another BIG BIG DISCOVERY (as was with FREEKEY, remember), and yes all the credit ALL of it is for you, thank you so much for take care of the people as you always have been doing ALWAYS , not allowing selling your souls.
People loves you all !!
Post by: Silenoz9 on February 19, 2011, 02:47:00 PM
Post by: JackintheXbox on February 19, 2011, 02:54:00 PM
QUOTE(xecuter)
Full credits goto all the Jungle Boys.
Yes this part is just SAD
Post by: syntaxerror329 on February 19, 2011, 03:01:00 PM
QUOTE(carranzafp @ Feb 19 2011, 04:15 PM)
Yes until they figured out how to copy it. But Im dissapointed I thought they were anouncing earlier
Hey Jungleboys, congratulations for another BIG BIG DISCOVERY (as was with FREEKEY, remember), and yes all the credit ALL of it is for you, thank you so much for take care of the people as you always have been doing ALWAYS , not allowing selling your souls.
People loves you all !!
They seem to only know how to copy unlike guys like you that actually put a great deal of time and brain power into developing hacks.
Post by: deadair4ever on February 19, 2011, 03:06:00 PM
Post by: syntaxerror329 on February 19, 2011, 03:09:00 PM
QUOTE(deadair4ever @ Feb 19 2011, 05:06 PM)
No more unsafe than MRA, which 1000s of noobs and hard-headed kids have used to brick their LiteOns.
I am sure if you slip and hit the wrong spot then it will still be possible to brick the drives.
Post by: iateshaggy on February 19, 2011, 03:15:00 PM
Post by: Team Modfreakz on February 19, 2011, 03:22:00 PM
Like always, stealing ideas and make own products!
I see dying people!!
Post by: DARKFiB3R on February 19, 2011, 03:23:00 PM
People wanted a DIY method, and now that we have one, the "JF boys" are getting slated for it?
Aaaaanyway... Wonder if you can do this with a ca-42 cable?
Post by: L!M!T on February 19, 2011, 03:54:00 PM
Post by: =jenipapo= on February 19, 2011, 04:06:00 PM
hahhaha
This post has been edited by =jenipapo=: Feb 20 2011, 12:06 AM
Post by: Martinchris23 on February 19, 2011, 04:10:00 PM
QUOTE(carranzafp @ Feb 19 2011, 09:15 PM)
Yes until they figured out how to copy it. But Im dissapointed I thought they were anouncing earlier
Hey Jungleboys, congratulations for another BIG BIG DISCOVERY (as was with FREEKEY, remember), and yes all the credit ALL of it is for you, thank you so much for take care of the people as you always have been doing ALWAYS , not allowing selling your souls.
People loves you all !!
Kudos for a DIY version being documented. It's only information after all, which most of us agree should be free.
I bet you were as miffed when the 079 CD was released too ....
Post by: xmstree on February 19, 2011, 04:19:00 PM
I still haven't seen any explanation for how this method works. Does anyone know?
Post by: Warpilein on February 19, 2011, 04:50:00 PM
QUOTE(Silenoz9 @ Feb 19 2011, 10:47 PM)
Congratulations!For the copy...
Yes its a Copy from the Scorpion but a Free Copy and it was only a matter of time that anyone Copy it cause it is a very simple think
Look at the Original an you see what i mean
Post by: OggyUK on February 19, 2011, 05:40:00 PM
Kiss my ass?
hahahhahahahahahhahahahahahhahahahahahahahahahahhaha
This post has been edited by OggyUK: Feb 20 2011, 01:40 AM
Post by: blackopsftw on February 19, 2011, 05:54:00 PM
Now time to find some wire (IMG:style_emoticons/default/smile.gif)
Post by: syntaxerror329 on February 19, 2011, 06:15:00 PM
Post by: ModchipCentral.com on February 19, 2011, 06:15:00 PM
(IMG:http://www.team-xecuter.com/x360usbpro/probev1_pogo_mo_thoin_hack2.jpg)
Post by: Juvenal1228 on February 19, 2011, 06:39:00 PM
but on a side note, does it bother anyone else that support for this was already in JF?
I mean, this "recently discovered" method of extracting keys from all liteon drives magically just, works with JF's existing key extraction.
Ya, no.
They (meaning the JF dev team) knew about this method for some time in order to code up the solution in JF 78
My guess is someone discovered this way back, but soon after the mra had been developed and kept it quiet to make more $$$ off mra devices.
But oh well, thats how capitalism works, just sucks to be on this end of it!
Post by: shloader on February 19, 2011, 08:49:00 PM
Post by: LittleBH on February 19, 2011, 09:06:00 PM
here you go! laugh it off, slag it off, but know one thing! it works and its free
[Ridiculously large picture removed. PM me, Aldanga, if you have a more suitable size you would like here.]
QUOTE(Juvenal1228 @ Feb 20 2011, 01:39 AM)
Ill be sticking with my Xtractor 2.3 and MRA's
but on a side note, does it bother anyone else that support for this was already in JF?
I mean, this "recently discovered" method of extracting keys from all liteon drives magically just, works with JF's existing key extraction.
Ya, no.
They (meaning the JF dev team) knew about this method for some time in order to code up the solution in JF 78
My guess is someone discovered this way back, but soon after the mra had been developed and kept it quiet to make more $$$ off mra devices.
But oh well, thats how capitalism works, just sucks to be on this end of it!
and if you believe that - i dare you to build one (like me) and try it with any version of JF that has been released to date
Post by: Juvenal1228 on February 19, 2011, 09:33:00 PM
QUOTE(LittleBH @ Feb 19 2011, 11:06 PM)
and if you believe that - i dare you to build one (like me) and try it with any version of JF that has been released to date
Are you saying it works with any version of JF? or none?
they say the "newest" and I wondered if that meant the version to be released with the XUSB crap
P.S. Your picture is obnoxiously large, please resize it.
Post by: Me9a on February 19, 2011, 10:24:00 PM
* Homebrew Easy / Cheap To Make
means that that every xbox360 is now like a fully hacked jtag ?
or are there some limitiations what stops homebrew ?
homebrew like xell or xellous or even all the emulators and freestyle dash.
it would be pretty cool if alle console are now able to run all the homebrew.
that will give homebrew development a good push
and we can hope for all that stuff what is currectly missing like a homebrew media player.
Mega
Post by: DARKFiB3R on February 19, 2011, 10:36:00 PM
QUOTE(Me9a @ Feb 20 2011, 05:24 AM)
what i dont understand so far is that part:
* Homebrew – Easy / Cheap To Make
means that that every xbox360 is now like a fully hacked jtag ?
or are there some limitiations what stops homebrew ?
homebrew like xell or xellous or even all the emulators and freestyle dash.
it would be pretty cool if alle console are now able to run all the homebrew.
that will give homebrew development a good push
and we can hope for all that stuff what is currectly missing like a homebrew media player.
Mega
Homebrew was probably not the best choice of words, as that is commonly used to refer to software.
It's just a DIY probe of sorts, for allowing the key to be extracted from your DVD drive, without having to cut and repair traces. Nothing to do with JTAG's or running unsigned code on your box.
QUOTE(Juvenal1228 @ Feb 20 2011, 04:33 AM)
Are you saying it works with any version of JF? or none?
they say the "newest" and I wondered if that meant the version to be released with the XUSB crap
P.S. Your picture is obnoxiously large, please resize it.
It only works with a currently unreleased version of JF
Post by: shloader on February 19, 2011, 10:36:00 PM
* Tested with X360USB PRO / VIA 6421 etc - Here's to hoping that stays true.
(DARKFiB3R pointed the version out kinda before I hit submit)
This post has been edited by shloader: Feb 20 2011, 06:39 AM
Post by: theagent on February 19, 2011, 10:44:00 PM
Post by: courier on February 20, 2011, 12:24:00 AM
QUOTE(syntaxerror329 @ Feb 20 2011, 02:15 AM) 
So this cap they want us to salvage from a original xbox is the same cap that always leaks and makes a mess on the motherboard. I think i am just going to a buy a new one. Too bad my electronics supplier is closed till Tuesday.
Yesssssssssssss !!!!!!! Perfect nice pics from this Crezy Boys !!!!!!!!! "FLY" No Cut,No Soldering,No Clips,No Damage (IMG:style_emoticons/default/pop.gif)
Post by: letsmod on February 20, 2011, 12:31:00 AM
Post by: courier on February 20, 2011, 12:40:00 AM
QUOTE(letsmod @ Feb 20 2011, 08:31 AM)
Lol !!!!! ScorpionFly is free for all need only 1 cap 1F. and 2 whire (IMG:style_emoticons/default/biggrin.gif) 1)red 1)black I love Scorpionfly (IMG:style_emoticons/default/muhaha.gif)
Post by: dank4life on February 20, 2011, 02:00:00 AM
And just so everyone knows what kind of people came up with this, I've never violated any rules in their website, much less even been there, but i clicked the link and discovered that they've blocked my IP address.
Post by: KoukiMonster91 on February 20, 2011, 02:09:00 AM
QUOTE(dank4life @ Feb 20 2011, 04:00 AM)
but i clicked the link and discovered that they've blocked my IP address.
static ip's are a bitch. unplug your router and plug it back in.
on topic: i love diy options, now if only there was a diy X360USB PRO option, and excuse my ignorance but are the clips (on this and maximus's offering) just for power?
This post has been edited by KoukiMonster91: Feb 20 2011, 10:22 AM
Post by: brunosso on February 20, 2011, 03:08:00 AM
Post by: darcc on February 20, 2011, 03:26:00 AM
and one more thing is it working with LT FW?
Post by: OggyUK on February 20, 2011, 03:58:00 AM
Post by: DARKFiB3R on February 20, 2011, 03:59:00 AM
QUOTE(dank4life @ Feb 20 2011, 09:00 AM)
It's pronounced, "poke my groin", huh? and that means what? Redundant waste of time? .Maybe i just don't understand why anyone would want to spend time and money looking for an xbox 1 to tear apart. We have a saying around here. Don't pole vault mouse turds. That logo is hilarious also. Grats.
And just so everyone knows what kind of people came up with this, I've never violated any rules in their website, much less even been there, but i clicked the link and discovered that they've blocked my IP address.
No offence mate, but that was a total load of shit from start to finish.
It's not pronounced like that.
It doesn't mean that.
If you have an old xbox laying around, you can use it. The idea is for this to pretty much cost £0
For some reason your IP is banned, so that makes "them" a certain kind of people?
You're a joker.
Post by: courier on February 20, 2011, 04:28:00 AM
QUOTE(brunosso @ Feb 20 2011, 11:08 AM)
How is possible to make the probe from the CK3...Where is the 1,8V on the CK3???
no need 1,8
take from your Best CK3 3,3V and Gnd take a multimeter you see yourself (IMG:style_emoticons/default/laugh.gif)
Post by: Mikaz on February 20, 2011, 04:59:00 AM
QUOTE(courier @ Feb 20 2011, 12:28 PM)
no need 1,8
take from your Best CK3 3,3V and Gnd take a multimeter you see yourself
http://www.chlazza.n...-HandC-V1_4.pdf
Page 16. you can take gnd from 5th and 3.3V from 6th.
Post by: DARKFiB3R on February 20, 2011, 05:18:00 AM
Could a USB port on a PC be used for power? What cap would be needed in that case?
Or is that a really bad idea?
This post has been edited by DARKFiB3R: Feb 20 2011, 01:25 PM
Post by: andy.macht on February 20, 2011, 05:26:00 AM
maybe we have to use a 5,5V or causes this a to high voltage on the board (should be 1,8V)?
This post has been edited by andy.macht: Feb 20 2011, 01:26 PM
Post by: OggyUK on February 20, 2011, 05:28:00 AM
Post by: HOMiE7 on February 20, 2011, 09:06:00 AM
Can somebody figure out which commands being sent to the Lite-on drive?
Post by: sdboltdude on February 20, 2011, 09:17:00 AM
QUOTE(DARKFiB3R @ Feb 20 2011, 02:59 AM)
No offence mate, but that was a total load of shit from start to finish.
It's not pronounced like that.
It doesn't mean that.
If you have an old xbox laying around, you can use it. The idea is for this to pretty much cost £0
For some reason your IP is banned, so that makes "them" a certain kind of people?
You're a joker. (IMG:style_emoticons/default/rolleyes.gif)
I HAVE 2 XBOX'S LAYING AROUND & CANT WAIT TO TEST....
I KNEW I SAVED THEM FOR SOMTHING
GREAT WORK AND GOOD WAY TO SAVE SOME $$$$ PLUS I LIKE TO BUILD OWN HACK///OR RIPOFF AUHHH I MEAN MODIFY HACKS
Post by: OggyUK on February 20, 2011, 09:39:00 AM
QUOTE(HOMiE7 @ Feb 20 2011, 04:06 PM)
Unfortunately, it's useless without Lizard or X360USB PRO.
Can somebody figure out which commands being sent to the Lite-on drive?
It's worthless until the new JF is released .... Which shouldnt be too long.
This has nothing to do with x360usb.
Post by: brunosso on February 20, 2011, 09:42:00 AM
QUOTE(HOMiE7 @ Feb 20 2011, 05:06 PM)
Unfortunately, it's useless without Lizard or X360USB PRO. (IMG:style_emoticons/default/sad.gif)
Can somebody figure out which commands being sent to the Lite-on drive?
I'm not at home, but you can try to power on the drive with the probe in, and send a command "Intro/DeviceID"...
probably it work!
Post by: OggyUK on February 20, 2011, 09:51:00 AM
Post by: Grandmaster56 on February 20, 2011, 10:29:00 AM
Post by: DARKFiB3R on February 20, 2011, 10:35:00 AM
Post by: Grandmaster56 on February 20, 2011, 10:49:00 AM
Post by: k0mpresd on February 20, 2011, 10:55:00 AM
QUOTE(OggyUK @ Feb 20 2011, 11:51 AM)
No, it won't.
yep. definitely doesnt work with the intro button. lol.
Post by: dank4life on February 20, 2011, 01:52:00 PM
QUOTE(k0mpresd @ Feb 20 2011, 09:55 AM)
yep. definitely doesnt work
EPIC
Post by: OggyUK on February 20, 2011, 02:00:00 PM
QUOTE(dank4life @ Feb 20 2011, 08:52 PM)
EPIC
Because it wasnt designed to work!
Look out for PhatKey In JF v0.1.79b!
Post by: courier on February 20, 2011, 02:02:00 PM
QUOTE(k0mpresd @ Feb 20 2011, 06:55 PM)
you just wait a new version of the Best apps,im sure probabily out really soon whit new button,new features from jungleboys (IMG:style_emoticons/default/biggrin.gif)
Post by: k0mpresd on February 20, 2011, 02:05:00 PM
QUOTE(OggyUK @ Feb 20 2011, 04:00 PM)
Because it wasnt designed to work!
Look out for PhatKey In JF v0.1.79b!
i want new jf. i want to test my key dumper.
Post by: feidhlim1986 on February 20, 2011, 02:09:00 PM
QUOTE(Grandmaster56 @ Feb 20 2011, 07:29 PM)
Just to clear things up about the name.I speak Gealic and its Pronounced "Pog Mo Thoin" Which means kiss me ass.They took this and used a play on words kind of thing and its "Pogo Mo Thoin".Any other Gaelic or Gaidhlig speaking person knows this.This also has nothing to do with X360USB.All X360USB is a simple usb to sata converter nothing more.
You're right that it translates to Kiss My Ass but the language is Irish. Which is not Gaelic.
This post has been edited by feidhlim1986: Feb 20 2011, 10:10 PM
Post by: Mr.RedRing on February 20, 2011, 02:30:00 PM
Post by: DARKFiB3R on February 20, 2011, 02:58:00 PM
QUOTE(feidhlim1986 @ Feb 20 2011, 09:09 PM)
You're right that it translates to Kiss My Ass but the language is Irish. Which is not Gaelic.
Gaelic is an adjective that means "pertaining to the Gaels", including language and culture. As a noun, it may refer to the group of languages spoken by the Gaels, or to any one of the languages individually.
Gaelic languages
Goidelic languages or Gaelic languages, a linguistic group that is one of the two branches of the Celtic languages; they include:
Irish language (Gaeilge)
Manx language (Gaelg or Gailck)
Scottish Gaelic (Gàidhlig), sometimes called Erse in Scots and English
When referring to Irish Gaelic or Manx Gaelic, it is usually pronounced /ˈɡeɪlɪk/. In Scotland, "Gaelic" is usually pronounced /ˈɡɑːlɪk/ or /ˈɡælɪk/; [ˈɡalɪk] in Scots and Scottish English.
QUOTE(Mr.RedRing @ Feb 20 2011, 09:30 PM)
Can this be used standalone, or do I need another piece of hardware. Im currently using a homemade probe to do the 7 series liteons, but i need to do the newer liteon drives and need to update mine from LT to LT+.
Just replace your current homemade probe with this new one, and carry on as you were. It'll do all phat lite-on's without cuts or solder.
Post by: iateshaggy on February 20, 2011, 03:05:00 PM
Post by: OggyUK on February 20, 2011, 03:26:00 PM
This post has been edited by OggyUK: Feb 20 2011, 11:27 PM
Post by: Grandmaster56 on February 20, 2011, 03:33:00 PM
QUOTE(DARKFiB3R @ Feb 20 2011, 09:58 PM)
Gaelic is an adjective that means "pertaining to the Gaels", including language and culture. As a noun, it may refer to the group of languages spoken by the Gaels, or to any one of the languages individually.
Gaelic languages
Goidelic languages or Gaelic languages, a linguistic group that is one of the two branches of the Celtic languages; they include:
Irish language (Gaeilge)
Manx language (Gaelg or Gailck)
Scottish Gaelic (Gàidhlig), sometimes called Erse in Scots and English
When referring to Irish Gaelic or Manx Gaelic, it is usually pronounced /ˈɡeɪlɪk/. In Scotland, "Gaelic" is usually pronounced /ˈɡɑːlɪk/ or /ˈɡælɪk/; [ˈɡalɪk] in Scots and Scottish English.
Just replace your current homemade probe with this new one, and carry on as you were. It'll do all phat lite-on's without cuts or solder.
Thankyou.I went a Gaelic school so i think i would know.There are two types of Gaelic.Scottish and Irish.
Take the word "House" for example.In scottish Gaelic Its spelt "Taigh" but in irish Gaelic its spelt "Tigh" But DarkFiber hit it right on the nail.
Post by: OggyUK on February 20, 2011, 06:56:00 PM
PhatKey Suport.
http://www.junglefla.../downloads.html
JungleFlasher 0.1.79(208S)
========================================
PhatKey support
----------------------------------------
Support for Lite-On key extraction, Using Pógó Mo Thóin DIY probe or Xecuter Probe III.
Thanks to Maximus & Co for the un-released original Concept.
Guide: http://bit.ly/hdtHsa
Hitachi Support
----------------------------------------
Gui changes in Hitachi::Drive area.
[Refresh] in Winapi no longer scans for new hardware
[Scan] added to scan for new hardware separately
[Remove] removed, but added to context menu for convienence
JF will accept system message about new drives added, JF will auto refresh list for new ODD.
x360USB Support
----------------------------------------
Initial support for x360USB added - More to follow at release
LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct
file is included and should be copied to JF folder if needed.
PortIO and other DLL's
----------------------------------------
We followed schtroms lead and embbed the Portio .sys files to load from temp folder. Other required
DLL's have been embedded also. For those using Test signed drivers in x64, PortIO load function
checks JF folder for existing files and uses those if present.
Post by: k0mpresd on February 20, 2011, 07:02:00 PM
Post by: OggyUK on February 20, 2011, 07:07:00 PM
Post by: OggyUK on February 20, 2011, 07:23:00 PM
Thanks!
Post by: k0mpresd on February 20, 2011, 07:43:00 PM
QUOTE(OggyUK @ Feb 20 2011, 09:23 PM)
Fixed..
Thanks!
tested and works awesome. thanks!
just did 2 drives (1 stock, 1 lt flashed) and so much easier than mra. thanks again.
Post by: dank4life on February 20, 2011, 09:32:00 PM
Post by: Takashi on February 20, 2011, 09:40:00 PM
Post by: DARKFiB3R on February 20, 2011, 09:48:00 PM
Link
This post has been edited by DARKFiB3R: Feb 21 2011, 05:49 AM
Post by: stewii griffin on February 20, 2011, 09:52:00 PM
QUOTE(DARKFiB3R @ Feb 20 2011, 11:48 PM)
LOL Cant wait to see someone set that up with some 4 gauge wire (IMG:style_emoticons/default/biggrin.gif)
Post by: HOMiE7 on February 20, 2011, 10:44:00 PM
QUOTE(OggyUK @ Feb 21 2011, 04:56 AM)
JungleFlasher v0.1.79b (208S)
PhatKey Suport.
...
Nice one, Oggy!
I've read POGO_MO_THOIN.pdf and I have some questions...
"Please Note, the only ways to know 100% that a key is good, is to ensure your drive key was verified by JF or flash your firmware to a identical drive first and test it in the xbox itself" - it's from the manual.
But you have CDB to check if the key is good. So why you just not add this feature in JF too to check dumped key against STILL UNMODDED (not erased, with original firmware) drive?
Maybe it'll be good to add "Verify key" button into DVDKey 32 tab?...
"Key has been tested and verified, thanks C4eva!" - that's what I'm talking about.
---
One more thing. Can we read full dump using this solution or only just key+inquiry+identify+serials=dummy? I've saw on pictures that JF says "No calibration data in source"...
Thanks!
Post by: iateshaggy on February 20, 2011, 11:05:00 PM
oggy, how does this new capacitor key extraction work if u don't mind blowing my mind. is this a hack or something that was built into the drives on purpose?
Post by: HOMiE7 on February 20, 2011, 11:33:00 PM
QUOTE(iateshaggy @ Feb 21 2011, 09:05 AM)
key verification works by making sure other info in the firmware matches, not the key. it more or less makes sure a dump matches the drive, no thtat the key is right. it assumes that current methods get the right key, which they do.
Huh? What about DVDKey 32 then? We probing R707 and getting only key+inquiry+identify+serial from PLDS DG-16D2S 74850C, but key verification works fine. So it looks like don't need full dump to verify key against the drive. By the way DosFlash (16bit version at least) have this feature!
Post by: Mjollnir on February 21, 2011, 01:02:00 AM
Guess I will stick with MRA full dump (yes I am pedantic and likes full dumps)
Post by: OggyUK on February 21, 2011, 01:20:00 AM
QUOTE(HOMiE7 @ Feb 21 2011, 05:44 AM)
Nice one, Oggy!
I've read POGO_MO_THOIN.pdf and I have some questions...
"Please Note, the only ways to know 100% that a key is good, is to ensure your drive key was verified by JF or flash your firmware to a identical drive first and test it in the xbox itself" - it's from the manual.
But you have CDB to check if the key is good. So why you just not add this feature in JF too to check dumped key against STILL UNMODDED (not erased, with original firmware) drive?
Maybe it'll be good to add "Verify key" button into DVDKey 32 tab?...
"Key has been tested and verified, thanks C4eva!" - that's what I'm talking about.
---
One more thing. Can we read full dump using this solution or only just key+inquiry+identify+serials=dummy? I've saw on pictures that JF says "No calibration data in source"...
Thanks!
The key is verified, after dump/before erase,
Thhat was just a c/p from the original tutorial, that oviously hadnt been removed when Key Verification was added to JF.
Also, It doesnt dump 3c000 data, its redundant information, anyway.
Key Verification works by verifying the KEY against the drive - Not any other data.
Post by: NYCXBOX on February 21, 2011, 01:33:00 AM
Post by: OggyUK on February 21, 2011, 01:47:00 AM
Post by: HOMiE7 on February 21, 2011, 03:54:00 AM
I've make my own scheme - please check is everything is OK here.
(IMG:http://homie7.narod.ru/pogo_mo_thoin_-_scheme_by_homie7_-_v1.0.png)
Big place for capacitor, small place for LED.
(IMG:http://i50.photobucket.com/albums/f320/RDCXBG/360DVDPowerConnectorToMolex.jpg)
Also I have another question. It is OK to use capacitor which is designed for 2.5v with 3.3v?
This post has been edited by HOMiE7: Feb 21 2011, 12:01 PM
Post by: OggyUK on February 21, 2011, 04:05:00 AM
Post by: HOMiE7 on February 21, 2011, 04:32:00 AM
QUOTE(OggyUK @ Feb 21 2011, 02:05 PM)
Right click source/target area - key verify is in there.
Wow! Didn't saw that! Awesome!
Post by: Buzzcut on February 21, 2011, 05:56:00 AM
Post by: OggyUK on February 21, 2011, 06:13:00 AM
Post by: Buzzcut on February 21, 2011, 06:22:00 AM
Cheers, OggyUK
This post has been edited by Buzzcut: Feb 21 2011, 02:24 PM
Post by: ddsdavey on February 21, 2011, 06:47:00 AM
Everywhere i look they are like £5 for gold ones,couldnt find much in my brief look,Ebay (sorry!) had nothing.
Post by: MadMaxGR on February 21, 2011, 09:01:00 AM
QUOTE(Team Modfreakz @ Feb 20 2011, 12:22 AM)
I can't stand it any longer.
Like always, stealing ideas and make own products!
I see dying people!!
This is not personal message to you but to all...they don't say they invented the hack, they give credits to the guy who did...
Presenting the SUPERFLY PROBE HACK lol
I think Maximus doesn't give any credits, do they? Did they really invented it? Because I see TX giving the oportunity to current owners create their own spear for peanuts! not charging 9-10 euros for it.
Anyway.. a BIG THANKS to Superfly!
Post by: bucky006 on February 21, 2011, 09:10:00 AM
Thanks.
Post by: Senseye on February 21, 2011, 09:32:00 AM
Post by: bucky006 on February 21, 2011, 09:49:00 AM
QUOTE(Senseye @ Feb 21 2011, 06:32 PM)
Just did this by sticking a 5,5V 0.68 cap on to a probe v1 and it worked on two drives, lt and stock liteons
Sweet, cheers dude.
Post by: kuiponok on February 21, 2011, 09:50:00 AM
Stock and later tested with LT+ (7, 8v2 and 9-series, all stock and LT+)
Nice job, guys (and girls?) (IMG:style_emoticons/default/biggrin.gif)
This post has been edited by kuiponok: Feb 21 2011, 06:01 PM
Post by: bucky006 on February 21, 2011, 10:42:00 AM
QUOTE(kuiponok @ Feb 21 2011, 06:50 PM)
Tested with a Cold Cap 1F 5.5v (round flat capacitor) and works perfectly.
Stock and later tested with LT+ (7, 8v2 and 9-series, all stock and LT+)
Nice job, guys (and girls?)
Exactly what I have, thanks for confirming.
Post by: BoNg420 on February 21, 2011, 11:25:00 AM
This shits funny Team Xecuter vs Maximus.
I support no side, as both sides of the fence seem shady to me.
This post has been edited by BoNg420: Feb 21 2011, 07:30 PM
Post by: 4DoorITR on February 21, 2011, 11:39:00 AM
Post by: kuiponok on February 21, 2011, 11:44:00 AM
QUOTE(4DoorITR @ Feb 21 2011, 08:39 PM)
So all of you feel safe not doing a full dump for calibration data?
I prefer MRA because of the calibration data, but this is a nice/simple solution if you don't have the key (e.g. flashed by someone else) and the drive is flashed with the LT firmware and you want to 'update' to the LT+
This post has been edited by kuiponok: Feb 21 2011, 07:50 PM
Post by: syntaxerror329 on February 21, 2011, 11:51:00 AM
QUOTE(4DoorITR @ Feb 21 2011, 01:39 PM)
So all of you feel safe not doing a full dump for calibration data?
I recall reading that c4eva had determined this area of the firmware is never even accessed. Not even sure calibration data is the correct term for it because I have seen no evidence that anyone has used this to adjust or calibrate anything. If i am wrong someone please link me to something that says otherwise.
Post by: Syn201 on February 21, 2011, 12:10:00 PM
QUOTE(4DoorITR @ Feb 21 2011, 08:39 PM)
So all of you feel safe not doing a full dump for calibration data?
Iv never done a full dump on any drive .im probably just as safe as anyone else doing the mra method
If ms want to ban us they will no calibration data no earth will help that
I just use the default calibration data .if ms ban me I lose out on 20 gbp which is all my 360 cost me(e74 still had warranty ,unopened sent back to ms
had it been opened I would of fixed)Anyways back on topic nice work keep it up and so on ,nice to see I dont have to go around cutting stuff which I was never in love with doing thats why iv never done a full dump ..
Post by: hellraiserkev on February 21, 2011, 03:44:00 PM
£10 each
Post by: xbannedx on February 21, 2011, 03:45:00 PM
EDIT: when i go to radioshack they are labeled as 1.0 UF, not 1.0 F
Post by: Senseye on February 21, 2011, 03:59:00 PM
Post by: VenomX2099 on February 21, 2011, 04:22:00 PM
Drive is Lite-On..
Sending Vendor Intro to port 0x0970
Status 0xD0
Re-sending Vendor Intro:
.............
Serial flash found with Status 0x52
Extracted drive key failed Verification !
PhatKey extraction failed!
Im using the xbox to power the drive I dont know if maybe im missing something? The drive is Stock FW
Post by: HOMiE7 on February 21, 2011, 04:42:00 PM
I'll post it here and on xboxhacker.org tomorrow! At first we'll fix russian manual, and then I'll translate it to english for you guys!
Post by: zyo on February 21, 2011, 06:52:00 PM
Post by: theagent on February 21, 2011, 07:48:00 PM
QUOTE(zyo @ Feb 21 2011, 05:52 PM)
anyone make a tut to mod Maximus Spears ?!
If you read the tutorials you'll see there's really no need to create multiple "tutorials" for each spear... it's very straightforward. The spear part of each "Spear" is really all you need. Get yourself a 1F 2.5v cap and solder it according to the original guide. If you're referring to the "Scorpion," then you don't need to do any of that, you can use it as is, or wire the 3.3V and GND leads that you'd normally connect to the IC to the 3.3V and GND of the dvd power cable.
Post by: KoukiMonster91 on February 21, 2011, 09:28:00 PM
QUOTE(theagent @ Feb 21 2011, 09:48 PM)
If you read the tutorials you'll see there's really no need to create multiple "tutorials" for each spear... it's very straightforward. The spear part of each "Spear" is really all you need. Get yourself a 1F 2.5v cap and solder it according to the original guide. If you're referring to the "Scorpion," then you don't need to do any of that, you can use it as is, or wire the 3.3V and GND leads that you'd normally connect to the IC to the 3.3V and GND of the dvd power cable.
any thing special about that spear? or can i use a multimeter prob?
Post by: theagent on February 21, 2011, 09:46:00 PM
QUOTE(KoukiMonster91 @ Feb 21 2011, 08:28 PM)
any thing special about that spear? or can i use a multimeter prob?
you can use a multimeter probe, needle, pin, component leg, etc.
Post by: KoukiMonster91 on February 22, 2011, 01:36:00 AM
QUOTE(theagent @ Feb 21 2011, 11:46 PM)
you can use a multimeter probe, needle, pin, component leg, etc.
i figured, thanks for the confirmation
Post by: cypher21 on February 22, 2011, 04:23:00 AM
Post by: ARY on February 22, 2011, 05:41:00 AM
QUOTE(HOMiE7 @ Feb 22 2011, 12:42 AM)
GREAT NEWS!!! One russian guy make another solution. It isn't required capacitor at all!!!
I'll post it here and on xboxhacker.org tomorrow! At first we'll fix russian manual, and then I'll translate it to english for you guys!
Hi, HOMiE7
1. Power on drive, swith on.
2. Press PhatKey, then Yes
3. Put switch off, connect GND to MPX01, Put switch on.
4. After "Extract Complete" power off the drive, disconnect GND from MPX01.
5. Power on the drive, then press OK.
6. Done!
Post by: pigbait on February 22, 2011, 08:47:00 AM
Post by: Mikaz on February 22, 2011, 09:01:00 AM
QUOTE(ARY @ Feb 22 2011, 01:41 PM)
Hi, HOMiE7
1. Power on drive, swith on.
2. Press PhatKey, then Yes
3. Put switch off, connect GND to MPX01, Put switch on.
4. After "Extract Complete" power off the drive, disconnect GND from MPX01.
5. Power on the drive, then press OK.
6. Done!
Just tried, working perfect! Thanks mate!
Post by: tomasvilda on February 22, 2011, 09:04:00 AM
Here are pics
Works!
Post by: Buzzcut on February 22, 2011, 09:09:00 AM
QUOTE(ARY @ Feb 22 2011, 12:41 PM)
1. Power on drive, swith on.
2. Press PhatKey, then Yes
3. Put switch off, connect GND to MPX01, Put switch on.
4. After "Extract Complete" power off the drive, disconnect GND from MPX01.
5. Power on the drive, then press OK.
6. Done!
Yep, just tested on Stock and LT+. That's just saved me a 10 mile cycle to pick up that Capacitor..
Awesome work.
Post by: Mikaz on February 22, 2011, 09:43:00 AM
Post by: Buzzcut on February 22, 2011, 09:58:00 AM
Post by: pigbait on February 22, 2011, 10:02:00 AM
upload image
Post by: pigbait on February 22, 2011, 10:25:00 AM
Post by: Buzzcut on February 22, 2011, 10:41:00 AM
QUOTE(pigbait @ Feb 22 2011, 05:25 PM)
i think i might be reading this wrong you need to kill 3.3v from drive, is that right???? if so ill get the cap and put it were my switch is and it will look ok...
Yes, see my pic above, just take the GND from the connector and put a switch in the 3.3v line (pin 6 on the connector), you don't need a cap.
Post by: xPlayax on February 22, 2011, 10:49:00 AM
QUOTE(tomasvilda @ Feb 22 2011, 05:04 PM)
KMA method without capacitor implemented!
Here are pics
Works!
hi, nice idea but it cant work! it just work if you cut the line on the ck between the switch...
elswere it maks no sence...
Post by: pigbait on February 22, 2011, 10:52:00 AM
Post by: tomasvilda on February 22, 2011, 11:06:00 AM
QUOTE(xPlayax @ Feb 22 2011, 07:49 PM)
hi, nice idea but it cant work! it just work if you cut the line on the ck between the switch...
elswere it maks no sence...
I think it's not visible clearly, but additional switch, turns on/off only 6 pin (+3.3V)
Post by: tomasvilda on February 22, 2011, 11:32:00 AM
QUOTE(xPlayax @ Feb 22 2011, 08:18 PM)
i know, but it wont cut the power... i just rebuild your method and mesure it but its still power on the pin 6...
the only difference betwen your mod and mine is that i have a ck3 pro but you wire the pin 6 to the eject switch. no cut on the ck pcb, no 3,3v cut =)
sry for my poor english... im german
CK pcb has cut track that supply +3.3V. Maybe it poorly visible.
here is zoomed pic
Post by: xPlayax on February 22, 2011, 12:02:00 PM
Post by: Serious Sam on February 22, 2011, 12:09:00 PM
Here's mine.
image host
Post by: andy.macht on February 22, 2011, 01:03:00 PM
the new solution without cap is working like a charm!
thanks to all who worked on that!
Post by: Suso14 on February 22, 2011, 01:16:00 PM
Tnx (Sorry my poor English)
Post by: xPlayax on February 22, 2011, 01:25:00 PM
QUOTE
Re-sending Vendor Intro:
.......
Serial flash found with Status 0x52
Extracted drive key failed Verification !
PhatKey extraction failed!
.......
Serial flash found with Status 0x52
Extracted drive key failed Verification !
PhatKey extraction failed!
why???
btw... i think its not nessesery that we connect the switch to the 3.3v bun not sure... yet
Post by: andy.macht on February 22, 2011, 01:29:00 PM
or you havent the right timing.
or something
3.3V switch is needet if u dont wanna use a capacitor
@suso:
you could cut/solder a switch onto the drive. (if its just one u wanna flash)
Post by: Suso14 on February 22, 2011, 01:34:00 PM
QUOTE(andy.macht @ Feb 22 2011, 09:29 PM)
maybe the preshure of GND-pin is too low.
or you havent the right timing.
or something
3.3V switch is needet if u dont wanna use a capacitor
@suso:
you could cut/solder a switch onto the drive. (if its just one u wanna flash)
I don't understand, How i can cut/solder a switch onto the drive? In what part of the drive?
Tnx (sorry for my poor english)
Post by: ARY on February 22, 2011, 01:39:00 PM
QUOTE(Suso14 @ Feb 22 2011, 09:16 PM)
Any idea for not cut the 3.3 V cable of my power cable Xbox? It's the only cable that i have, so if i cut the cable i have scare that my xbox don't power on
Tnx (Sorry my poor English)
You can get wire from plug and insert it again, when it's need
Post by: Suso14 on February 22, 2011, 01:43:00 PM
QUOTE(ARY @ Feb 22 2011, 09:39 PM)
You can get wire from plug and insert it again, when it's need
Ok, but when i put the cable again it will be place correctly in the plug? (the cable will remain firm and not move? Or need some kind of glue?)
Tnx
Post by: ARY on February 22, 2011, 02:32:00 PM
QUOTE(Suso14 @ Feb 22 2011, 09:43 PM)
Ok, but when i put the cable again it will be place correctly in the plug? (the cable will remain firm and not move? Or need some kind of glue?)
Tnx
Yes, sure. Just pull fixing stick and get wire
Post by: njmbb8 on February 22, 2011, 04:53:00 PM
Post by: xPlayax on February 22, 2011, 04:58:00 PM
Anleitung für ALLE LiteOn Laufwerken
just german... if there are enough people hwo wants to know wat i did plz sent pe pm and i translate it.
Post by: njmbb8 on February 22, 2011, 08:58:00 PM
Post by: Poopmonkey on February 22, 2011, 10:56:00 PM
I tried this setup. Cut the Red wire as indicated. Knocked off all surface mount resistors and diodes and then bridge the one place to continue the 3.3v line. The red stuff on the probe is just red liquid insulation tape. Anyways, I tried this setup and I cannot get it to succeed.
Then I saw that the ground wire, aka the black wire does not really attach to anything so mounted a wire like this indicated by the red line. This caused my CK3 Lite to turn off every time I activated the switch, since I basically created a ground fault.
So I removed that new soldered wire and tried a few more times with the first setup. Still did not help. I tried pigphat's directions, I did different timings for the 5 seconds, I feel like I tried it all. Anyone know whats the problem here?
Post by: Serious Sam on February 22, 2011, 11:31:00 PM
QUOTE(njmbb8 @ Feb 22 2011, 10:58 PM)
so i get all the way to the wait for 5 seconds step and it says phat key extraction failed. please help
When i get to the "wait for 5 seconds part" shutting off the drive doesn't work for me. What I do is remove the pin, hit yes, switch the 3.3v switch OFF for 5 seconds then ON.
Post by: lugi on February 23, 2011, 01:47:00 AM
Have to find a better spear =)
Close up http://img98.imagesh...i/img0058q.jpg/
Post by: cypher21 on February 23, 2011, 06:13:00 AM
That won't work,
Why so difficult
For more examples, better look at the xecuter forums in the contest topic
Post by: redwhitedream on February 23, 2011, 10:36:00 AM
Who have the SPEAR or VAMPIRE!!
There is no MOD necessary !!!
Spear:
Press Phat Key :yes
Spear to MPX01
Very Quikly OFF/ON The Drive!!
Turn 5sec off and on press okay
Ready!!
With the Vampire there you can do it the same way!
only difference is you must use the pin 101 and press the Button!!!
Post by: Buzzcut on February 23, 2011, 11:10:00 AM
An easier method I found on another forum is this, it just avoids the pull-out-plug-push-it-back-in power recycle for the non CK3 users.
1) Drive on
2) Click Phat key, click yes
3) Cut 3.3v line (press button), probe MPX01, join 3.3v line (release button)
4) When extraction is complete, instead of removing probe and recycling power just remove probe and cut 3.3v line for a couple of seconds, i.e. I just hold the button down for a couple of secs.
5) Click OK.
EDIT - Just seen that Serious_Sam has this method as well a couple of posts above...can't hurt having it twice though IMO.
Post by: ARY on February 23, 2011, 11:48:00 AM
QUOTE(Buzzcut @ Feb 23 2011, 07:10 PM)
Here's mine with a press-to-break switch next to the probe...neatest solution I could come up with.
An easier method I found on another forum is this, it just avoids the pull-out-plug-push-it-back-in power recycle for the non CK3 users.
1) Drive on
2) Click Phat key, click yes
3) Cut 3.3v line (press button), probe MPX01, join 3.3v line (release button)
4) When extraction is complete, instead of removing probe and recycling power just remove probe and cut 3.3v line for a couple of seconds, i.e. I just hold the button down for a couple of secs.
5) Click OK.
EDIT - Just seen that Serious_Sam has this method as well a couple of posts above...can't hurt having it twice though IMO.
Read my post at page 9. I developed it
Post by: Buzzcut on February 23, 2011, 12:40:00 PM
QUOTE(ARY @ Feb 23 2011, 06:48 PM)
Read my post at page 9. I developed it
I read it at the time...it's what prompted me to make my own. I'm just saying you don't have to power cycle the drive, just cut and reconnect the 3.3v line.
Post by: Ubergeek on February 23, 2011, 12:40:00 PM
QUOTE(njmbb8 @ Feb 23 2011, 12:53 AM)
can someone show me which cable is 3.3v and which is ground on the dvd power cable?
FYI all this is in the instructions.
QUOTE(Buzzcut @ Feb 23 2011, 08:40 PM)
I read it at the time...it's what prompted me to make my own. I'm just saying you don't have to power cycle the drive, just cut and reconnect the 3.3v line.
....which is the same as power cycling the drive - semantics
Both will work
Post by: Ubergeek on February 23, 2011, 03:24:00 PM
QUOTE(dank4life @ Feb 20 2011, 10:00 AM)
It's pronounced, "poke my groin", huh? and that means what? Redundant waste of time? .Maybe i just don't understand why anyone would want to spend time and money looking for an xbox 1 to tear apart. We have a saying around here. Don't pole vault mouse turds. That logo is hilarious also. Grats.
And just so everyone knows what kind of people came up with this, I've never violated any rules in their website, much less even been there, but i clicked the link and discovered that they've blocked my IP address.
QUOTE(dank4life @ Feb 21 2011, 05:32 AM)
please dont be fooled by copycat vaporware folks. and pay no attention to the man behind the curtain. I'm sure team exlax will release an original product eventually. you may find karma to be a cruel bitch, but some of us choose to Think. Different.
Crazy vaporware huh ? Waste of time yeah ?
This is probably why you are blocked from the site - because you rant like a dipshit who continually and habitually makes a fool of himself with biased nonsense. It's like the ramblings of a madman who you find sitting in the corner of a padded room eating flies and/or his own shit.
You are also right - TX never released anything original. However I do think that over 220,000 users of their XB1 mods with 5 years worth of ground breaking bios hacks would disagree
- you do remember who helped start the scene yeah ? and before you say Bunnie - have a look on the first page of Bunnies book - 2 TX members right there. But who cares about that stuff The scene is about reversing - its what we all do - you can't support one team who reverses then shit on another team that does the same - get over it ffs - it's a game - enjoy it and stop being a little bitch. The enemy is MS not each other !
QUOTE(Geremia @ Nov 29 2009, 06:59 PM)
http://www.xboxhacke...g88126#msg88126
Thanks for reporting your findings, nice one
That's the power of knowledge spreading
Post by: Poopmonkey on February 23, 2011, 05:13:00 PM
The length of those cable just are a rough trim of them. I did not really care how long they were since before I switched to the blue 24 awg wire I tried 30 awg and I had it at perfect length. So once it did not work with 30awg I thought maybe 30 awg cannot carry 3.3v so I tried 24awg and it still does not work...
Post by: brando56894 on February 23, 2011, 06:59:00 PM
QUOTE(DARKFiB3R @ Feb 19 2011, 03:04 PM)
Póg mo thóin
(pronounced pogue muh ho-in)
I knew it was Gaelic (or Irish)! Google translate kept saying it meant pogo my ass
Once you had it spelled out phonetically I remember hearing it when I was looking up Irish phrases a little while ago since the words are pronounced so different than what they look like.
Post by: VivaLaMikey on February 24, 2011, 05:08:00 AM
If so what parts are the easiest? And will the PMT Tut work me through this?
I have modded alot of 360's but never one that needed a probe before.
Thanks in advance
Post by: popaman on February 24, 2011, 11:57:00 AM
Post by: xboxdawg on February 24, 2011, 01:12:00 PM
Redwhitedream please elaborate or anyone else who has tried it.
Thanks
As far as building your own, are there any specific requirements for the switch?
Would this work:
http://www.radioshac...591#tabsetBasic
I think it'd be nice to have the LED indicator to tell you when it's on or off and a push button might be easier to do when holding a probe rather than having to slide or toggle a switch.
I'm assuming it has to be an AC switch but are there voltage requirements? I assume most switches should easily handle 3.3v. Am I right?
Sorry for the noob questions but I like to clarify things before I buy parts and start assembly.
Thanks,
XBD
Post by: MrG_1981 on February 24, 2011, 01:43:00 PM
QUOTE(xboxdawg @ Feb 24 2011, 09:12 PM)
I think it'd be nice to have the LED indicator to tell you when it's on or off and a push button might be easier to do when holding a probe rather than having to slide or toggle a switch.
@xboxdawg Look at this, I think the switch will be better
http://www.radioshac...oductId=2909787
Just what I've done
3,3V ON
3,3V OFF
Post by: codroc on February 24, 2011, 01:43:00 PM
The spear has to be of origin or modify?
Post by: xboxdawg on February 24, 2011, 01:56:00 PM
Post by: codroc on February 24, 2011, 01:59:00 PM
sorry for my English I use a translator
Post by: xboxdawg on February 24, 2011, 02:17:00 PM
Post by: codroc on February 24, 2011, 02:24:00 PM
Post by: xboxdawg on February 24, 2011, 04:02:00 PM
QUOTE(codroc @ Feb 24 2011, 10:24 PM)
no
OK, I guess we will have to wait until someone who has it working tells us how he did it.
Thanks,
XBD
Post by: xboxdawg on February 25, 2011, 09:45:00 AM
QUOTE(MrG_1981 @ Feb 24 2011, 09:43 PM)
@xboxdawg Look at this, I think the switch will be better
http://www.radioshac...oductId=2909787
Just what I've done
3,3V ON
3,3V OFF
----------------------------------------
MrG 1981 is that a 360 xtractor pro you are using?
The pics aren't very clear so it's hard to tell. If it is could you tell me what you did? (what pins you wired, etc.) Also is it a version 1 or version 2.
The switch you sent me a link for is a DC switch. Don't I need an AC switch?
Thanks,
XBD
Post by: MrG_1981 on February 25, 2011, 11:39:00 AM
QUOTE(xboxdawg @ Feb 25 2011, 05:45 PM)
----------------------------------------
MrG 1981 is that a 360 xtractor pro you are using?
The pics aren't very clear so it's hard to tell. If it is could you tell me what you did? (what pins you wired, etc.) Also is it a version 1 or version 2.
The switch you sent me a link for is a DC switch. Don't I need an AC switch?
Thanks,
XBD
Yes, it's Maximus 360 XTRACTOR Pro V2, my camera sucks My good camera was stolen
can you take a picture of the underside of the Maximus.dann I'll show you what I did
The drive operates with DC current, not AC
The other switch should also work
sorry for my english Google translator is to blame
Post by: xboxdawg on February 25, 2011, 12:02:00 PM
I will post pics in a few minutes.
Thanks
Post by: xboxdawg on February 25, 2011, 03:28:00 PM
The front has 4 silver pad spots. The ones I labeled say 3V3 and GND. I assume they are the 3.3v and Ground.
Any suggestions?
Thanks
Post by: MrG_1981 on February 25, 2011, 05:50:00 PM
Post by: xboxdawg on February 25, 2011, 07:35:00 PM
Thanks!
XBD
Post by: MrG_1981 on February 25, 2011, 07:47:00 PM
Post by: Xfreaks on February 26, 2011, 12:08:00 AM
but i only have Maximus 360 Power Unit (dongle) without usb xtractor.
can i use it? where i must get the GND and 3.3v ???
Post by: xboxdawg on February 26, 2011, 12:48:00 AM
If so you should have the cable that connects to the 360 drive coming out of it. You can get the 3.3v and ground from that cable. I believe earlier in this thread they show which wires on that cable are the proper ones. If not check the PMT pdf file.
Cut the 3.3v wire and put your switch there. Strip part of the ground wire and connect a wire to it and run it to a pin or whatever you decide to use as your probe.
That's my understanding of it. If I'm wrong someone please correct me and help him out.
I have a maximus 360 xtractor pro. Instead of cutting and soldering on it I think I'll just put my switch in the cable that's going to the drive. Then pull my ground off the ground wire and run it to my spear.
Good luck!
XBD
Post by: Xfreaks on February 26, 2011, 02:20:00 AM
QUOTE(xboxdawg @ Feb 26 2011, 02:48 PM)
Do you power the drive with that dongle? It's kind of hard to tell from the photo.
If so you should have the cable that connects to the 360 drive coming out of it. You can get the 3.3v and ground from that cable. I believe earlier in this thread they show which wires on that cable are the proper ones. If not check the PMT pdf file.
Cut the 3.3v wire and put your switch there. Strip part of the ground wire and connect a wire to it and run it to a pin or whatever you decide to use as your probe.
That's my understanding of it. If I'm wrong someone please correct me and help him out.
I have a maximus 360 xtractor pro. Instead of cutting and soldering on it I think I'll just put my switch in the cable that's going to the drive. Then pull my ground off the ground wire and run it to my spear.
Good luck!
XBD
Yes. it's direct to the drive power socket without any power cable. it's different than a pro version.
Post by: MrG_1981 on February 26, 2011, 07:02:00 AM
QUOTE(Xfreaks @ Feb 26 2011, 10:20 AM)
Yes. it's direct to the drive power socket without any power cable. it's different than a pro version.
Post by: MrG_1981 on February 26, 2011, 08:17:00 AM
PIN6 Switch
o________/_______ 3,3V
Post by: Kamse on February 27, 2011, 03:09:00 AM
QUOTE(tomasvilda @ Feb 22 2011, 07:32 PM)
CK pcb has cut track that supply +3.3V. Maybe it poorly visible.
here is zoomed pic
Hi Tomas, i want to make the same trick, can you please provide some photos and steps to achieve this.
Thanks a lot mate.
Post by: MrG_1981 on February 27, 2011, 02:53:00 PM
QUOTE(Kamse @ Feb 27 2011, 11:09 AM)
Hi Tomas, i want to make the same trick, can you please provide some photos and steps to achieve this.
Thanks a lot mate.
I wonder what you still need more photos, the photo shows all that needs to be made
Cut the trace solder 2 cables to switches Done
Post by: MrG_1981 on February 28, 2011, 05:55:00 AM
QUOTE(zyo @ Feb 28 2011, 08:10 AM)
hmm
I have got a xtractor pro and Spear
is there anyway to mod these two so I can use them for other drives? (say slim for the future?)
So far all existing methods seem to permanenty mod the xtractor by adding a voltage directly to the drive pin. I wonder if I plug it straight into another non-lite-on dvd-drive is it going to break/fry it?
for non-liteon, the switch on pin 6 must be ON
the 3.3 V is needed and normally always there on PIN6
for Liteon it must be switched off to read the key
Post by: xboxdawg on February 28, 2011, 10:29:00 AM
Plus if you mess up the drive cable you can always buy another one fairly cheap.
XBD
Post by: xboxdawg on February 28, 2011, 12:56:00 PM
Just curious.
XBD
Post by: MrG_1981 on February 28, 2011, 02:50:00 PM
QUOTE(xboxdawg @ Feb 28 2011, 08:56 PM)
Does the ground for the pin have to come from the ground wire or can you do like the guy earlier in this thread (post #172, pg 12) and just clip the ground to your xbox?
Just curious.
XBD
GND is GND no matter where it comes from
Post by: BoNg420 on March 01, 2011, 10:47:00 AM
Supplies needed:
1. Switch
2. XBOX 360 DVD power cable
3. Safety Pin or sewing needle or pogo pin if you have any.
4. 20-24 Gauge wire(you can use any you want, but I wanted something a little thicker since its going to move around more. I find 28-30 gauge wire to weak and breaks easy)
5. Electrical tape.
6. Shrink tubing
Cost $5ish
Tools needed:
1. Wire stripper
2. Wire snips
3. Solder iron and solder
4. Hot Glue gun
Bought this at Radio Shack
http://www.radioshac...oductId=2062544
notice the notches on top of your DVD power connector and the picture above.
Figure out which wire is for pin 6 by looking at the picture above.
I cut it at half length.
Then soldered the wires to the legs on the switch for pin 6 which is 3.3v
Then figure out the wire for pin 5.
At about the center I took my wire stripper and stripped the wire a little bit.
Then I took a piece of 22 gauge wire about 8-10 inches long and wrapped it around the wire I exposed with my stripper.
Then I soldered the wire to the exposed area for maximum durability.
Then I had a large safety pin. I cut it, but I held the side with the sharp pin with a pair of pliers so it wouldn't fly off when I cut it and so I didn't have it fly up in my eye or something.
Then I soldered the the pin to the 22 gauge cable. Covered with a few heat shrink tubes and shrunk them down.
Then I took hot glue and covered my exposed solder points, taped a bunch of stuff together in the center of the wires, basically i just taped the wires all together in the center and made sure to cover any area I soldered to with hot glue and tape first before taping the whole area. Then when I was done, I made a big ball of hot glue and taped it next to my switch on the cable so I can poke into it with the needle so it has a safe place to be when in storage so its not just hanging out.
Make sure to test your PMT before taping everything together.
1. CK3 Main Power ON, 3.3v Switch ON
2. Press PhatKey, then Yes
3. 3.3v Switch OFF, connect GND wire to MPX01, 3.3v Switch ON
4. After "Extract Complete" disconnect GND from MPX01, CK3 main Power OFF. Wait 5 seconds.
5. CK3 Main Power ON, press OK.
6. Done!
Post by: Xfreaks on March 01, 2011, 11:10:00 PM
anyone have made it???
Post by: DaShiZNiT on March 02, 2011, 03:00:00 AM
QUOTE(xboxdawg @ Mar 1 2011, 01:44 PM)
Great post Bong420.
Straight and to the point
XBD
Yes, great job.
Post by: BoNg420 on March 02, 2011, 07:21:00 AM
QUOTE(Xfreaks @ Mar 2 2011, 01:10 AM)
can i make this PMT without ck3 or xtractor????
anyone have made it???
Yes you can see my post above. Just need a DVD cable, a switch and a safety pin or needle.
Post by: BoNg420 on March 02, 2011, 09:22:00 AM
QUOTE(Xfreaks @ Mar 2 2011, 10:42 AM)
can you make a picture of your tutorial ???
thanks
I didn't take any pictures when i was doing it.
Get the switch I linked to at radioshack. It only has 2 prongs at the bottom of it.
Its really easy. Look at the picture that shows the power connectors and notice how the notches on top the connector are.
Now find the wire for pin 6.
Follow that wire and cut it in the center. Use wire stripper to strip the 2 ends of the wire. Put the switch in between where you made your cut by soldering the wires to the 2 prongs at each end of the wire you cut.
Then only strip the wire for pin 5 around the middle of the cable. Get a longer piece of wire and solder that to the exposed stripped area. I wrapped mine around the wire a few times, then soldered. At the end of that wire solder your needle or cut off safety pin etc. Cover that with something to prevent you from touching the needle and leave the end exposed. I used shrink tubing to cover it.
Post by: VivaLaMikey on March 07, 2011, 11:10:00 AM
Anyway here she is
http://i584.photobuc...ey/DSC00054.jpg
http://i584.photobuc...ey/DSC00053.jpg
http://i584.photobuc...ey/DSC00052.jpg
All i used is some spare plugs & wires i had left over from some pc fans i had lying round an x360 J1D1 dvd cable and a needle and of course powered with my Maximus Xtractor.
I just soldered the needle onto the end of the wire pushed it back through the plug heat shrinked it soldered it onto the GND then i put 2 fan plugs as the switch (done at 3am so used what i had) am goin to put a proper switch on when the stores open, and thats pretty much it.
Works perfectly and a hell of alot faster than MRA
1. Seeing as im using VIA still i hooked all my sata & power up.
2. In JF my drive properties were already showing so i hit PhatKey
3. Since i am powering with xtractor i left power on my xtractor unplugged my plugs/switch then i probed MPX01 and while holding the probe i plugged the plugs back in (bit of a mission with one hand) and left the probe on
4. Got my 0x52 status then lifted my probe off (got a bit of a spark from hitting another point on the way off lol)
5. Put my probe down unplugged my plugs waited 5 seconds, plugged back in & hit OK, got the prompt, saved my dummy files.
6. Then proceeded with normal flashing as per previous JF.
Worked like a charm, Im loving seeing all these new ideas coming out & i know people have probably posted this a thousand times but im reasonably proud of my work and hopefully a newbie out there will try my guide.
Post by: madman46804 on March 08, 2011, 01:10:00 PM
QUOTE(redwhitedream @ Feb 23 2011, 06:36 PM)
For all Maximus Xtractor Users !
Who have the SPEAR or VAMPIRE!!
There is no MOD necessary !!!
Spear:
Press Phat Key :yes
Spear to MPX01
Very Quikly OFF/ON The Drive!!
Turn 5sec off and on press okay
Ready!!
With the Vampire there you can do it the same way!
only difference is you must use the pin 101 and press the Button!!!
confirmed with vampire thanks op
Post by: barzi on March 15, 2011, 07:46:00 AM
Post by: BKster on March 17, 2011, 10:12:00 AM
QUOTE
connect GND wire to MPX01
Where does the ground that I connect to MPX01 come from?...also where exactly is MPX01 located?...Its kinda hard to tell which pad is the right one...because they all right there in one crowd together...
Help Anyone???Im trying to get this down packed...and after i learn this Im goin to do a step by step tutorial for a lot better explanation.Im making it right now as I type....Im going to upload some pics to show yall how much progress I have done so far....Thanks,,,Pic coming soon....Step for step...I already have a spare practice board for a lite on drive so this would be great training...
B.K. The Tech'
Post by: Avinitlarge on March 26, 2011, 08:05:00 AM
Post by: syntaxerror329 on March 26, 2011, 08:27:00 AM
QUOTE(Avinitlarge @ Mar 26 2011, 10:05 AM)
Just a quick one. Does the pogo mo thoin probe do the 7,8 & 9 series liteon, or do you still need the serial cable to do the 7 series?
All lite-on's can be done this way.
Post by: Avinitlarge on March 26, 2011, 05:29:00 PM
QUOTE(syntaxerror329 @ Mar 26 2011, 04:27 PM)
All lite-on's can be done this way.
And so they can. Just altered my home made probe and tried it. Its just so simple, I am stunned but well chuffed with it
Post by: Avinitlarge on March 28, 2011, 06:56:00 AM
Post by: pastortom on April 07, 2011, 08:25:00 AM
http://forums.xbox-s...howtopic=730227
Post by: Nemesis2007 on July 04, 2012, 12:52:00 AM
Uploaded with ImageShack.us