xboxscene.org forums
Xbox360 Forums => Xbox360 Hardware Forums => Xbox360 General / Hardware Chat => Topic started by: wesley_fg on March 06, 2009, 11:15:00 PM
-
My 360 got 3RL (0102), I mad the X-clamp and it worked. One hour later I opened the console again and I taked the motherboard out of the case, when I puted the motherboard inside the case again and I turned on the console on, it gived E74, I've open again and I saw one of the washers was too largue, and damaged the resistors (C3C2 and C3R8). I replaced the resistors (with the resistors from a PC GPU) and the E74 continued, but the C3C2 got out again, I made the Reflow (with the headgun and the resistor C3C2 missing) and it didn't work too, I replaced the resistor C3C2 again, but it didn't work, I looked and one of the capacitors was blown, I replace It with a capacitor taked of from a PC board but it didn't work too. I don't know what I shold to do now.