xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: turfster on December 30, 2011, 10:04:00 AM

Title: Mw3 Black Screen
Post by: turfster on December 30, 2011, 10:04:00 AM
Don't use kreon drive's anymore. It will not rip the newer game's properly. You need a lite on or benq xbox360 drive with 0800 v3 firmware now. You also need a way to hook it up to your pc.

 

You can order one here as well as the power dongle for your pc.

 

http://www.vgcrepair...products_id=235

 

http://www.vgcrepair...products_id=263

 

http://www.vgcrepair...products_id=623

 

 

Title: Mw3 Black Screen
Post by: dougiegillam on December 30, 2011, 11:23:00 AM
QUOTE(Ryan87500 @ Dec 30 2011, 06:44 PM) View Post

I updated the drive to LT3.0 and ripped MW3 with kreon and applied the patch.  I burned the game and everything verified.  When I press play game it goes black then returns to the dashboard.  I put an older game in that I had burnt already and it boots fine (game burnt before the topology patches etc)

What am I doing wrong?

Simple dont use the Kreon drive its pretty much usless now, Benq or even better use a Liteon to rip your original XGD3 disks.
Title: Mw3 Black Screen
Post by: turfster on December 30, 2011, 03:07:00 PM
QUOTE(Ryan87500 @ Dec 30 2011, 12:54 PM) View Post


Do these drives mount on in a PC without any issues? All I need is the power adapter?


 

 You need the drive, power dongle w/ power connector(long one if possible), sata cable and a open sata port on your pc motherboard. Make sure your sata port is activated and refesh dvd/cd drives in device manager. Latest XBC will detect it. You can also get one of these....http://www.ebay.com/itm/Xbox-360-USB-External-0800-V3-Drive-No-Sata-Ports-Needed-/130600807276?pt=LH_DefaultDomain_0&hash=item1e686a2b6c
Title: Mw3 Black Screen
Post by: leekennedy on December 30, 2011, 03:19:00 PM
QUOTE(Ryan87500 @ Dec 31 2011, 04:44 AM) View Post

I updated the drive to LT3.0 and ripped MW3 with kreon and applied the patch.  I burned the game and everything verified.  When I press play game it goes black then returns to the dashboard.  I put an older game in that I had burnt already and it boots fine (game burnt before the topology patches etc)

What am I doing wrong?

Make sure you are on Latest Dash