Post by: ep99 on December 26, 2011, 10:34:00 AM
But here is the info on Liteon 02510c LT+3.0 -
This version adds support for topology data in place of AP2.5 replay data for all XGD3 and AP2.5-active XGD2 backups.
*NOTE: For drives that support AP2.5, all backups containing AP2.5 replay data will need to be patched or re-dumped and re-burned for compatibility with v3.0.
Post by: ichigoxxx on December 26, 2011, 11:17:00 PM
QUOTE(stevedawg85 @ Dec 26 2011, 01:24 PM) 
I have a Liteon (yellow wire) and updated to 3.0. I used the file LTPlus-0251-v3.0 (right one right?) to update this morning. All older backups work, but games which I have installed the game update for (Revelations, Modern Warfare, Battlefield) do not boot up. I thought 3.0 was supposed to 'fix' this. I don't need to reburn the games do I? I burnt them before the 3.0 update.
u need to re rip, patch and burn them
Post by: darthwazza on December 27, 2011, 06:33:00 AM
Post by: mod_irl on December 27, 2011, 08:26:00 AM
Post by: darthwazza on December 27, 2011, 08:52:00 AM
Post by: mouseym on December 27, 2011, 06:19:00 PM
Post by: darthwazza on December 28, 2011, 07:26:00 AM
QUOTE(mouseym @ Dec 28 2011, 01:19 AM)
Clear the cache on your HDD.
I tried clearing the cache but it still wont boot. Thanks for giving me something to try.
What ive had to do to get it working was burn the game again with topology from forza disc not se the master topology had to do the same with skyrim too.
Post by: gameworld on December 28, 2011, 07:42:00 AM
QUOTE(hardie @ Dec 27 2011, 08:15 PM)
For the topology to work:-
You need Dashboard 14699
Drive with Lt+3.0
Topology embedded game disk.
So you saying if i update my xbox 360 to the lastest microsoft dashboard then flash with the 3.0 fw . the new topology wont work?
Post by: darthwazza on December 28, 2011, 08:15:00 AM
QUOTE(themightyred @ Dec 28 2011, 02:37 PM)
ok, am confused now.
Reflashed my drives this morning and all worked ok.
Re-patched MW3 and NFS The Run using the generic XGD3 bin file as provided for by C4Eva (thanks for that).
Both games worked fine. Straight boot. no issues.
Tried to apply the same process or both Saints Row 3 and Skyrim and neither work! Am totally confused by this as I've done nothing dfferent from MW3 and NFS!
Anyone else had these issues? If so, what did you do to resolve them (assuming you have resolved them!)
I have the latest dash and the games are burnt using an Ihas burner, so am satisfied that things are all good on that front.
What I'd like to avoid, is wasting Verbatims and time if there is something I'm doing wrongly!
Any help is most appreciated.
Thanks in advance
TMR
I had the same problem with skyrim and saints row.
What i had to do was get topology file from the skrim/saints row discs and use that. C4E master topology didnt seem to work for me other than for mw3. ill pm you a link to where i got mine from. Dont know if im aloud to post on here.
Post by: hardie on December 28, 2011, 04:15:00 PM
QUOTE(gameworld @ Dec 29 2011, 12:12 AM)
So you saying if i update my xbox 360 to the lastest microsoft dashboard then flash with the 3.0 fw . the new topology wont work?
Where did I write it wont work ??
It says to work -- doesnt anyone read anymore
Post by: Rammieone on December 28, 2011, 04:48:00 PM
Only game i have had an issue doing is the new Batman.
Post by: hardie on December 28, 2011, 05:50:00 PM
QUOTE(themightyred @ Dec 29 2011, 08:55 AM)
OK, getting thoroughly tee'd off with this now.
Rayman Origins - patched using the "universal" patch - doesnt work. Same as Skyrim, Same as SR3.
Am not doing anymore now as this "patch" clearly only works on selected titles.
Really hope that someone can point us (me) in the right direction of some individual patches for each title.
I have not had a problem with these games or Batman
Are u sure you are actually injecting the patch into the iso
can be overlooked in XBC as its already ticked to extract - need to tick box to inject
Post by: themightyred on December 29, 2011, 05:54:00 AM
QUOTE(hardie @ Dec 29 2011, 02:50 AM)
I have not had a problem with these games or Batman
Are u sure you are actually injecting the patch into the iso
can be overlooked in XBC as its already ticked to extract - need to tick box to inject
Am definitely "injecting" the patch. NFS and MW3 working prove that. I've read elsewhere that people are having issues with Skyrim, SR3 and others, so am completely satisfied tha I'm doing this correctly.
Burning at x2.4, verbatim disks, Ihas burner...so am following ALL the correct procedures on this one too.
Getting massively frustrated. The injection is being done directly into the .iso too, so am not ripping these from a disk
Post by: ichigoxxx on December 29, 2011, 08:29:00 AM
good luck
Post by: kuiponok on December 29, 2011, 01:28:00 PM
iHas Burner Max (external) and Verbatim @ 4 speed.
Tested with BenQ and also Lite-on, LT+ v3.0 and the 14699 Dash.
Post by: JamesNY on December 30, 2011, 02:16:00 AM
with what program
Post by: hardie on December 30, 2011, 02:41:00 AM
QUOTE(JamesNY @ Dec 30 2011, 06:46 PM)
can someone tell me how to inject topology data
with what program
Xbox Backup Creator ( new version) or if you get individual patch files that are ppf use ppfomatic
with XBC go to image tools - tick inject - tick ap25 sector - browse for iso-browse for patch - done
Post by: JamesNY on December 30, 2011, 02:52:00 AM
Post by: themightyred on December 30, 2011, 12:12:00 PM
Am still confused by this though. How the original patch worked on a couple of games, then no more is beyond me!
Still....am all sorted now. Thanks to those who offered suggestions of help. Much appreciated.
Post by: hollowtip on December 30, 2011, 04:55:00 PM
QUOTE(themightyred @ Dec 30 2011, 11:12 AM)
Got it sorted now. Re-downloading the universal patch has worked.
Am still confused by this though. How the original patch worked on a couple of games, then no more is beyond me!
Still....am all sorted now. Thanks to those who offered suggestions of help. Much appreciated.
You most likely forgot to switch to "inject" and instead extracted bad AP 2.5 data and overwrote the universal patches bin when you selected one of your isos. It's easy to do because the dialog pop-up boxes are essentially the same whether you're extracting or injecting.
Post by: gameworld on January 01, 2012, 11:04:00 PM
I google it and I cant find where to get it.
Post by: hardie on January 01, 2012, 11:33:00 PM
Post by: iateshaggy on January 02, 2012, 12:45:00 AM
Post by: Alexbeav on January 02, 2012, 10:11:00 PM
I have a phat liteon, updated with latest dashboard from M$ site and flashed with LT 3.0
I understand that because of a .DAE (?) update, all my XDG3 backups (& Halo : Reach) are rendered unplayable (this disc is not recognized). I managed to play GoW 3 after formatting my USB drive and using another .DAE file from a site.
Can I use my existing disc, rip it to hard drive, patch/inject it with something, re-burn and it'll work for good now ? I understood there's a universal patch on C4Eva's site, but I couldn't find it.
Is there a detailed guide to backing up games for LT 3 ?
Also, please note that I do NOT have an iHas/iMax burner, however all my XDG3 truncated backups (GoW3,Skyrim,B:AC,Forza 4) were working perfectly from start to finish, and were working again with the USB with the new .DAEs.
Post by: filletofish on January 03, 2012, 02:50:00 AM
QUOTE(Alexbeav @ Jan 3 2012, 07:11 AM)
I'm fairly new at this, and haven't understood most of the things said in here
I have a phat liteon, updated with latest dashboard from M$ site and flashed with LT 3.0
I understand that because of a .DAE (?) update, all my XDG3 backups (& Halo : Reach) are rendered unplayable (this disc is not recognized). I managed to play GoW 3 after formatting my USB drive and using another .DAE file from a site.
Can I use my existing disc, rip it to hard drive, patch/inject it with something, re-burn and it'll work for good now ? I understood there's a universal patch on C4Eva's site, but I couldn't find it.
Is there a detailed guide to backing up games for LT 3 ?
Also, please note that I do NOT have an iHas/iMax burner, however all my XDG3 truncated backups (GoW3,Skyrim,B:AC,Forza 4) were working perfectly from start to finish, and were working again with the USB with the new .DAEs.
Yes you can just rip your existing backups and patch with universal topology patch apprpriate for your backup. But since your backups are truncated, no matter what you do they will be truncated obviously even if burnt on an iHAS burner.
It's highly advised to pay up the small amount for an iHAS (x)24 burner and play proper backups, there's reports that some truncated backups definately don't work on the latest dash with LT3.0 and that most won't work when installed to the hard drive.
If you update to LT3.0 - NONE of your XGD3 backups will work that don't have topology data patched in.
Basically, this is the sensible time to give it up and just pay for a drive, people are going to be less willing to offer help on situations like this because there is a solution and it's not expensive.
If you do make the sensible choice and get an iHAS (x)24 burner, it would be also very sensible to redo your backups properly.
I can assure you truncated backups aren't going to be a viable solution for long as new games come out that use the whole game partition, have proper checks etc. Then there's the likelyhood of the next dash having checks for truncated backups, this one seems to already for games that are installed to hard drive.
1. Pay up for iHAS burner
2. Pay up for verbatim disks
3. Flash LT3.0
4. Redo your backups so they aren't truncated. (re-rip from originals, ripping from a truncated backup - even if burning with iHAS burner will still give a truncated backup)
5. Relax.
Post by: Alexbeav on January 03, 2012, 03:42:00 AM
QUOTE
1. Pay up for iHAS burner
I will, and I have another question for that :
I found this one on amazon
CODE
http://www.amazon.co.uk/LiteOn-IHAS224-19-Lite--DVD-RW-LightScribe/dp/B002CHRAS4/ref=sr_1_1?ie=UTF8&qid=1325583496&sr=8-1
Would that work ?
Also, I found the universal XDG3 patch and re-burned GoW3 on a spare disc I had. Worked great !
Thanks for the info
Post by: mod_irl on January 03, 2012, 11:35:00 AM
Post by: mouseym on January 03, 2012, 11:53:00 AM
QUOTE(mod_irl @ Jan 3 2012, 06:35 PM)
after running assassins creed revelations through the new abgx 1.0.6 and burning with ihas burnermax + verbatims, i could not get it to work on any xbox with LT 3.0, and the new lego harry potter, same problem. Are some of the uploaded topologies in abgx not the correct ones? It seems there might be some issues with some games + LT3 as ALL other xgd3 burns work.
run the burned discs through abgx360 to make sure they burned correctly
Post by: filletofish on January 03, 2012, 03:49:00 PM
QUOTE(Alexbeav @ Jan 3 2012, 12:42 PM)
I will, and I have another question for that :
I found this one on amazon
CODE
http://www.amazon.co.uk/LiteOn-IHAS224-19-Lite--DVD-RW-LightScribe/dp/B002CHRAS4/ref=sr_1_1?ie=UTF8&qid=1325583496&sr=8-1
Would that work ?
Also, I found the universal XDG3 patch and re-burned GoW3 on a spare disc I had. Worked great !
Thanks for the info
Yep, that's fine mate.
Once you receive it you can also crossflash it to a 624 which is the top end model. (even numbers can be flashed to even numbers and odd to odd, so a 124 can be crossflashed up to a 524 for example).
Post by: mod_irl on January 04, 2012, 12:18:00 PM
QUOTE(mouseym @ Jan 3 2012, 06:53 PM)
run the burned discs through abgx360 to make sure they burned correctly
Funnily enough it starts getting errors at 49% and it fails installing on xbox at the same point. all other games burn and work fine except AC-R, Batman and the new lego harry potter, all ran through abgx and burnt the same way as everyother game (img burn, ihas with burnermax, verbatim 00
003 discs, burnt at 4x with opc and ive tried 2.4x aswell, same problem). what-else could be the problem?
Post by: Rammieone on January 04, 2012, 12:52:00 PM
QUOTE(mod_irl @ Jan 4 2012, 07:18 PM)
Funnily enough it starts getting errors at 49% and it fails installing on xbox at the same point. all other games burn and work fine except AC-R, Batman and the new lego harry potter, all ran through abgx and burnt the same way as everyother game (img burn, ihas with burnermax, verbatim 00
003 discs, burnt at 4x with opc and ive tried 2.4x aswell, same problem). what-else could be the problem?
Just a thought but maybe worth running them through ABGX (your images) and then try burning them off again.
Just in case anything went wrong with the injecting of the T.Data
Post by: digipimp75 on January 04, 2012, 01:16:00 PM
QUOTE(mod_irl @ Jan 4 2012, 02:18 PM)
Funnily enough it starts getting errors at 49% and it fails installing on xbox at the same point. all other games burn and work fine except AC-R, Batman and the new lego harry potter, all ran through abgx and burnt the same way as everyother game (img burn, ihas with burnermax, verbatim 00
003 discs, burnt at 4x with opc and ive tried 2.4x aswell, same problem). what-else could be the problem?
I had a problem with Lego Harry Potter 5-7 too. Ran it through new abgx, and it patched successfully. Burned it at 2.4x on Verbatim with iHas624 w/burnermax. The burn and verify went great... no issues there. First attempt to launch it gave a disc unreadable error. Opened/closed the tray and the game booted to the title screen. Then it went to a black screen, no errors. Finally I installed it to the hdd and it runs great from there. It's the only one I've had a problem with so far... no idea why.
Post by: viewer-x on January 04, 2012, 03:43:00 PM
QUOTE(mod_irl @ Jan 4 2012, 10:51 PM)
mine fails when installing to the harddrive at 49%, i ran it through abgx 1.0.6 again and and it said fully verified already (everything green) and it still doesnt work. really strange. I also checked the .dvd files and they were set to the correct layerbreak. Have burnt a few other titles todday and they work perfect like skyrim + gow3
Have you checked your burned discs with KProbe2? Maybe there are too many max. PI/PIF errors which makes the Xbox rejecting the burned discs. The Xbox drive seems to be very sensitive to that.
Max. PI should be below 300 and max. PIF should be not more than 6. The lower the better.
You can find KProbe2 at kprobe.com.
Maybe worth a try.
And you might also want to change your burn settings in case your PI/PIF values are too high.
Someone did a bunch of test with different settings on the ImgBurn forum and he uses slighty different settings than the recommend ones.
Read it yourself: http://forum.imgburn...mp;#entry136519
Search for: Results - 8th Attempt
Clear OPC History
Force Hypertuning - On
Online Hypertuning - Off
Speed 4x
OPC off
I use those myself with my iHAS-624 and my PI/PIF values are never over 60/4 on Verbatims.
With the standard settings I got around 500/8 and some discs didn't even got verifyed at all on ImgBurn so I could throw them away.
Post by: mod_irl on January 04, 2012, 09:05:00 PM
QUOTE(viewer-x @ Jan 4 2012, 10:43 PM)
Have you checked your burned discs with KProbe2? Maybe there are too many max. PI/PIF errors which makes the Xbox rejecting the burned discs. The Xbox drive seems to be very sensitive to that.
Max. PI should be below 300 and max. PIF should be not more than 6. The lower the better.
You can find KProbe2 at kprobe.com.
Maybe worth a try.
And you might also want to change your burn settings in case your PI/PIF values are too high.
Someone did a bunch of test with different settings on the ImgBurn forum and he uses slighty different settings than the recommend ones.
Read it yourself: http://forum.imgburn...mp;#entry136519
Search for: Results - 8th Attempt
Clear OPC History
Force Hypertuning - On
Online Hypertuning - Off
Speed 4x
OPC off
I use those myself with my iHAS-624 and my PI/PIF values are never over 60/4 on Verbatims.
With the standard settings I got around 500/8 and some discs didn't even got verifyed at all on ImgBurn so I could throw them away.
Thanks for the link, I cuoldnt see what settings that user was using though. Where do you clear opc and turn hypertuning on? just running a kprobe now
Post by: mod_irl on January 04, 2012, 09:22:00 PM
Date : 1/5/2012 3:11:40 AM
Model : 0-0-1-0 ATAPI iHAS124 B AL0S
Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation]
Speed : Max
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267008
Sampling count : 248699
Errors : 0
PI Max : 1447
PI Average : 10.52
PI Total : 330285
PIF Max : 220
PIF Average : 3.86
PIF Total : 121203
So those results are way too high. Gonna try change the settings in imgburn and see if that helps
Post by: mod_irl on January 04, 2012, 10:53:00 PM
Post by: mod_irl on January 05, 2012, 08:46:00 AM
Post by: viewer-x on January 05, 2012, 09:04:00 AM
Made in Taiwan are not as good and Made in India are absolutely atrocious.
Check what's on your cake box. And if you don't habe the Singapore ones try to get some of those next time you buy some.
Post by: gameworld on January 05, 2012, 10:11:00 AM
Download the the new ABGX360 1.0.6 and run the it make sure you set it to level 3 first.
I just now all my burn are working . Im using memorex disc 4x.
also tested with verbatim disc too and it all work.
If you been using other disc give it a try I been using memorex for many years and had no problem.
I wasted about 15 disc becaused of the topology bin file. So is not the memorex disc is the file .
I just used the new ABGX360 1.0.6 yesterday and had made 20 backups and it work good.
my setting is :
I 00:28:42 Operation Started!
I 00:28:42 Source File: D:\Downloads\Assassins.Creed.Revelations.XBOX360-COMPLEX\complex-acr\assassins_creed_rev.dvd
I 00:28:42 Source File Sectors: 4,267,015 (MODE1/2048)
I 00:28:42 Source File Size: 8,738,846,720 bytes
I 00:28:42 Source File Volume Identifier: DVD_ROM
I 00:28:42 Source File Volume Set Identifier: 8db24000MS UDFBridge
I 00:28:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 00:28:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 00:28:42 Source File File System(s): ISO9660, UDF (1.50)
I 00:28:42 Destination Device: [4:0:0] ATAPI iHAS124 B AL0S (E:) (SATA)
I 00:28:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)
I 00:28:42 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 00:28:42 Destination Media Sectors: 4,267,040
I 00:28:42 Write Mode: DVD
I 00:28:42 Write Type: DAO
I 00:28:42 Write Speed: 4x
I 00:28:42 Link Size: Auto
I 00:28:42 Lock Volume: Yes
I 00:28:42 Test Mode: No
I 00:28:42 OPC: No
I 00:28:42 BURN-Proof: Disabled
I 00:28:42 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 00:28:42 Book Type Setting: DVD-ROM
I 00:28:42 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes
I 00:28:42 Optimal L0 Data Zone Capacity: 2,133,520
I 00:28:42 Optimal L0 Data Zone Method: Copied From Original Disc
I 00:28:42 Set L0 Data Zone Capacity Succeeded!
I 00:28:42 Filling Buffer... (40 MB)
I 00:28:43 Writing LeadIn...
I 00:29:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 00:29:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 00:29:12 Writing Layer 0... (LBA: 0 - 2133519)
I 00:42:28 Writing Layer 1... (LBA: 2133520 - 4267014)
I 00:55:51 Synchronising Cache...
I 00:55:56 Closing Track...
I 00:55:57 Finalising Disc...
I 00:56:34 Exporting Graph Data...
I 00:56:34 Graph Data File: C:\Users\redwushu\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_THURSDAY-JANUARY-05-2012_12-28_AM_RITEK-S04-66_4x.ibg
I 00:56:34 Export Successfully Completed!
I 00:56:34 Operation Successfully Completed! - Duration: 00:27:48
I 00:56:34 Average Write Rate: 5,340 KB/s (3.9x) - Maximum Write Rate: 5,634 KB/s (4.1x)
For anyone that doesnt have IHAS DRIVE just used your burner that you have and burn at 4x and trunicated.
I had tested 2 memorex and 2 verbatims disc on my regular dvd burner and it work good too.
SO YOU REALLY DONT NEED THE iHAS DRIVE.
Download the new ABGX360 1.0.6 and set it to level 3
Post by: phojitsu on January 05, 2012, 11:01:00 AM
QUOTE(mod_irl @ Jan 4 2012, 11:53 PM)
I tried the settings mentioned - force HT, disable online HT, clear opc and 4x + opc off and still get : PI max:434, PIF max:99. It all goes well until 50%, thats where PI and PIF spike for about 1-2% and imgburn fails verifying at the same percentage. Its only with the 3x games I mentioned, everything else burns and runs fine. What could be causing this?
I'm getting the same problems with mine, PI and PIF nice and low everywhere else, with a huge spike (lowest was around 340 with the settings mentioned). That occurs right around the layer break. I have the ihas 124 B drive flashed w/ burner max. Drive in my 360 is a liteon 83850c; XGD2 titles burn and play just fine- however, with XGD3 titles (so far tried dark souls and BF3, both run through ABGX 1.06), I get the generic "play game" icon which goes to black screen, doesn't load, and then kicks back to the dashboard. I will have to try killing all processes / background programs, and disconnecting from the network when burning to see if that makes a difference. Using verbatim mk003 discs, not sure where they're made (threw out the label... oops).
Post by: mod_irl on January 05, 2012, 11:16:00 AM
QUOTE(viewer-x @ Jan 5 2012, 04:04 PM)
The best Verbatims for XGD3 backups are the ones Made in Singapore.
Made in Taiwan are not as good and Made in India are absolutely atrocious.
Check what's on your cake box. And if you don't habe the Singapore ones try to get some of those next time you buy some.
Unfortunatly I dont have the label
QUOTE(gameworld @ Jan 5 2012, 05:11 PM)
dont used to topology file that doesnt work I had wasted 10 memorex disc and 5 verbatim disc.
Download the the new ABGX360 1.0.6 and run the it make sure you set it to level 3 first.
I just now all my burn are working . Im using memorex disc 4x.
also tested with verbatim disc too and it all work.
If you been using other disc give it a try I been using memorex for many years and had no problem.
I wasted about 15 disc becaused of the topology bin file. So is not the memorex disc is the file .
I just used the new ABGX360 1.0.6 yesterday and had made 20 backups and it work good.
my setting is :
I 00:28:42 Operation Started!
I 00:28:42 Source File: D:\Downloads\Assassins.Creed.Revelations.XBOX360-COMPLEX\complex-acr\assassins_creed_rev.dvd
I 00:28:42 Source File Sectors: 4,267,015 (MODE1/2048)
I 00:28:42 Source File Size: 8,738,846,720 bytes
I 00:28:42 Source File Volume Identifier: DVD_ROM
I 00:28:42 Source File Volume Set Identifier: 8db24000MS UDFBridge
I 00:28:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 00:28:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 00:28:42 Source File File System(s): ISO9660, UDF (1.50)
I 00:28:42 Destination Device: [4:0:0] ATAPI iHAS124 B AL0S (E:) (SATA)
I 00:28:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)
I 00:28:42 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 00:28:42 Destination Media Sectors: 4,267,040
I 00:28:42 Write Mode: DVD
I 00:28:42 Write Type: DAO
I 00:28:42 Write Speed: 4x
I 00:28:42 Link Size: Auto
I 00:28:42 Lock Volume: Yes
I 00:28:42 Test Mode: No
I 00:28:42 OPC: No
I 00:28:42 BURN-Proof: Disabled
I 00:28:42 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 00:28:42 Book Type Setting: DVD-ROM
I 00:28:42 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes
I 00:28:42 Optimal L0 Data Zone Capacity: 2,133,520
I 00:28:42 Optimal L0 Data Zone Method: Copied From Original Disc
I 00:28:42 Set L0 Data Zone Capacity Succeeded!
I 00:28:42 Filling Buffer... (40 MB)
I 00:28:43 Writing LeadIn...
I 00:29:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 00:29:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 00:29:12 Writing Layer 0... (LBA: 0 - 2133519)
I 00:42:28 Writing Layer 1... (LBA: 2133520 - 4267014)
I 00:55:51 Synchronising Cache...
I 00:55:56 Closing Track...
I 00:55:57 Finalising Disc...
I 00:56:34 Exporting Graph Data...
I 00:56:34 Graph Data File: C:\Users\redwushu\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_THURSDAY-JANUARY-05-2012_12-28_AM_RITEK-S04-66_4x.ibg
I 00:56:34 Export Successfully Completed!
I 00:56:34 Operation Successfully Completed! - Duration: 00:27:48
I 00:56:34 Average Write Rate: 5,340 KB/s (3.9x) - Maximum Write Rate: 5,634 KB/s (4.1x)
For anyone that doesnt have IHAS DRIVE just used your burner that you have and burn at 4x and trunicated.
I had tested 2 memorex and 2 verbatims disc on my regular dvd burner and it work good too.
SO YOU REALLY DONT NEED THE iHAS DRIVE.
Download the new ABGX360 1.0.6 and set it to level 3
Please see previous posts, games ran through abgx already and it patched them correctly.
The problem seems to be around 50% of burning (probably aruond where the layerbreak is) and only happens on some games, not all xgd3's
Post by: mod_irl on January 05, 2012, 11:45:00 AM
QUOTE(phojitsu @ Jan 5 2012, 06:01 PM)
I'm getting the same problems with mine, PI and PIF nice and low everywhere else, with a huge spike (lowest was around 340 with the settings mentioned). That occurs right around the layer break. I have the ihas 124 B drive flashed w/ burner max. Drive in my 360 is a liteon 83850c; XGD2 titles burn and play just fine- however, with XGD3 titles (so far tried dark souls and BF3, both run through ABGX 1.06), I get the generic "play game" icon which goes to black screen, doesn't load, and then kicks back to the dashboard. I will have to try killing all processes / background programs, and disconnecting from the network when burning to see if that makes a difference. Using verbatim mk003 discs, not sure where they're made (threw out the label... oops).
I just bought some new verbs and they work perfect getting 24/4 now in kprobe. Must have just been some bad batch of verbs I had. maybe try a different batch of discs if you are having the same issue I had.
Post by: phojitsu on January 05, 2012, 11:55:00 AM
QUOTE(mod_irl @ Jan 5 2012, 12:16 PM)
Unfortunatly I dont have the label
Please see previous posts, games ran through abgx already and it patched them correctly.
The problem seems to be around 50% of burning (probably aruond where the layerbreak is) and only happens on some games, not all xgd3's
Just curious which games you're having problems with? So far I've only tried bf3 and dark souls- what's strange is the discs verify 100% with ABGX (no errors), however they won't play or let me install.
EDIT: just realized I haven't tried rebooting / power cycling the drive after clearing OPC. Hoping this could be the cause...
Post by: filletofish on January 06, 2012, 05:10:00 PM
QUOTE(viewer-x @ Jan 5 2012, 06:04 PM)
The best Verbatims for XGD3 backups are the ones Made in Singapore.
Made in Taiwan are not as good and Made in India are absolutely atrocious.
Check what's on your cake box. And if you don't habe the Singapore ones try to get some of those next time you buy some.
Pretty sure the india ones are now considered very good and have been for a good few months. Although Singapore still best allegedly. I have no source to link to but read on a couple of a sites a few months ago from well known members, think it was cdfreaks.
Post by: mitchd2100 on January 07, 2012, 11:04:00 PM
Post by: JamesNY on January 12, 2012, 04:48:00 AM
Post by: filletofish on January 12, 2012, 08:26:00 AM
QUOTE(JamesNY @ Jan 12 2012, 01:48 PM)
when to expect 3.0 for slims??
January