Post by: Xbox-Scene on June 14, 2011, 05:34:00 PM
C4Eva iXtreme LT v1.9 for Samsung and LT+ v1.9 for Benq and phat Lite-On Posted by XanTium | June 14 19:34 EST | News Category: Xbox360 |
| C4E released the iXtreme LT+ v1.9 CFW in association with Team Jungle & Team Xecuter: Quote
Official Site: C4Eva, http://www.jungleflasher.net/, http://team-xecuter.com/ Download: n/a (might be illegal under DMCA/EUCD) |
Post by: RRoD420 on June 14, 2011, 06:37:00 PM
Post by: shtewps on June 14, 2011, 06:38:00 PM
Post by: nox13666 on June 14, 2011, 06:41:00 PM
Post by: DaShiZNiT on June 14, 2011, 06:42:00 PM
Thank you very much C4eva. Fuck all the haters, you're a LEGEND in my book.
Post by: herbert7890 on June 14, 2011, 06:47:00 PM
Post by: deilzfcjk on June 14, 2011, 06:59:00 PM
Post by: dazv6 on June 14, 2011, 07:02:00 PM
Post by: djgook on June 14, 2011, 07:37:00 PM
never mind, got it!
Post by: Modify_inc on June 14, 2011, 07:43:00 PM
QUOTE(djgook @ Jun 15 2011, 02:37 AM) 
So which Benq do I use? Post or Pre?? Whats the difference?
never mind, got it!
How did you get it if xbins is down?
Post by: AceVanquish on June 14, 2011, 07:54:00 PM
This means all games would need reburned or just halo reach, cod bo, etc.? I am not sure what is being considered AP2.5 anymore since after the latest dash update a lot of games would not play with LT+ 1.1.
Post by: stuntz0rZ on June 14, 2011, 08:12:00 PM
Post by: Magnaflow on June 14, 2011, 08:14:00 PM
Post by: Modify_inc on June 14, 2011, 08:15:00 PM
QUOTE(JD45 @ Jun 15 2011, 02:57 AM)
#c4e topic
#C4e is from my understanding is only for discussion not for downloading anything.
Anyhow I found it via other means.
I'm uncertain of the pre and post versions. Is that referring to before or after a specific dashboard (13141) or something else? There were no instructions, only a brief nfo file for each The pre version of LiteOn has multiple bin files and relates to the older LT 1.1, while the post version only has one bin.
Also what does the 1a000, 1b000, 1c000, 1e000 bins mean for the pre versions of the LiteOn?
Are there any instructions/guides or is it to early?
Sorry, but I'm lost at this point
Post by: 360ModNation on June 14, 2011, 08:16:00 PM
Post by: Defosho on June 14, 2011, 08:22:00 PM
QUOTE(AceVanquish @ Jun 14 2011, 09:54 PM)
...
This means all games would need reburned or just halo reach, cod bo, etc.? I am not sure what is being considered AP2.5 anymore since after the latest dash update a lot of games would not play with LT+ 1.1.
This means all games would need reburned or just halo reach, cod bo, etc.? I am not sure what is being considered AP2.5 anymore since after the latest dash update a lot of games would not play with LT+ 1.1.
QUOTE(stuntz0rZ @ Jun 14 2011, 10:12 PM)
Can anyone please explain about the ap 2.5 games needing patching?
All explained here.
Post by: JD45 on June 14, 2011, 08:23:00 PM
QUOTE(Modify_inc @ Jun 14 2011, 07:15 PM) 
#C4e is from my understanding is only for discussion not for downloading anything.
Anyhow I found it via other means.
I'm uncertain of the pre and post versions. Is that referring to before or after a specific dashboard (13141) or something else? There were no instructions, only a brief nfo file for each The pre version of LiteOn has multiple bin files and relates to the older LT 1.1, while the post version only has one bin.
Also what does the 1a000, 1b000, 1c000, 1e000 bins mean for the pre versions of the LiteOn?
Are there any instructions/guides or is it to early?
Sorry, but I'm lost at this point (IMG:style_emoticons/default/sad.gif)
I wouldn't have said #c4e topic if there wasn't a link in their topic... and also
Pre 13141 is the LT and original firmware for 360s that haven't updated to the new dashboard.
Post 13141 is the LT and original firmware for the 360s that have updated.
You can use the original pre 13141 firmware to flash back to stock if you want to do so before updating to the new dash. Otherwise if you're updated already just flash the new firmware.
This post has been edited by JD45: Jun 15 2011, 03:33 AM
Post by: Dermy on June 14, 2011, 08:41:00 PM
QUOTE(Modify_inc @ Jun 14 2011, 10:15 PM)
#C4e is from my understanding is only for discussion not for downloading anything.
Anyhow I found it via other means.
I'm uncertain of the pre and post versions. Is that referring to before or after a specific dashboard (13141) or something else? There were no instructions, only a brief nfo file for each The pre version of LiteOn has multiple bin files and relates to the older LT 1.1, while the post version only has one bin.
Also what does the 1a000, 1b000, 1c000, 1e000 bins mean for the pre versions of the LiteOn?
Are there any instructions/guides or is it to early?
Sorry, but I'm lost at this point
On a side note, when I use the single orig-liteon_74850c.bin I have from a previous pack, when I put the disc in, the drive spins up really fast and then stops. It never is able to read the disc.
EDIT: The 1a000 worked for me. After a little googling, I found that this string refers to where the drive key is stored in the original fw. I clicked the KeyDB button on jungleflasher. Next I clicked on the drive fw that I was looking for. Then I saw a line that said "DVD Key @: XXXX". Mine started with an 'A' so I chose the 1a000 version. I tested it and this ofw works fine for my drive. I still might be wrong though. I might have flashed the right ofw by coincidence. If anyone knows I'm wrong go ahead and correct me. Or if I'm right and anyone knows a quicker way to find which ofw you should use instead of using the KeyDB then tell too.
Post by: UnnA^ on June 14, 2011, 08:59:00 PM
orig-74850C-1a000
orig-74850C-1b000
orig-74850C-1c000
orig-74850C-1e000
Which one do i use to flash back to stock?
Thanks.
Post by: digipimp75 on June 14, 2011, 09:04:00 PM
Post by: tomgreen99200 on June 14, 2011, 09:22:00 PM
Post by: sonic2120 on June 14, 2011, 09:30:00 PM
Post by: hoybrahd on June 14, 2011, 09:40:00 PM
This post has been edited by hoybrahd: Jun 15 2011, 04:44 AM
Post by: ichigoxxx on June 14, 2011, 09:50:00 PM
Post by: EverReadyEverWil on June 14, 2011, 09:51:00 PM
Post by: Yafeu on June 14, 2011, 09:54:00 PM
QUOTE(Modify_inc @ Jun 14 2011, 09:15 PM)
#C4e is from my understanding is only for discussion not for downloading anything.
Anyhow I found it via other means.
I'm uncertain of the pre and post versions. Is that referring to before or after a specific dashboard (13141) or something else? There were no instructions, only a brief nfo file for each The pre version of LiteOn has multiple bin files and relates to the older LT 1.1, while the post version only has one bin.
Also what does the 1a000, 1b000, 1c000, 1e000 bins mean for the pre versions of the LiteOn?
Are there any instructions/guides or is it to early?
Sorry, but I'm lost at this point
If you have your drive key, load your drive's version of LT 1.9 (Post 13141 Folder) into the target FW and paste in your drive key, then flash..
QUOTE(EverReadyEverWil @ Jun 14 2011, 10:51 PM)
Anyone having a issue with xbins? I cant get the LT1.9 for my Lite-on...
Yes, XBINS is down.. when you try to connect, you'll notice a message telling you they have hardware issues.
Try google, ixtreme . net even
Post by: ichigoxxx on June 14, 2011, 10:04:00 PM
QUOTE(hoybrahd @ Jun 14 2011, 11:40 PM)
so if I have a Benq flashed with LT 1.1 and 12645 dash so w/o newest update, do i flash with Benq Post 13141 and then update to new dashboard or do i need to do the Benq Pre 13141, update the dash then reflash with the new Benq Post 13141? also so when I reflash to new LT 1.9 for Benq all the AP25 games I have to repatch with abgx and reburn correct so it work with 1.9? also abgx has updated patches already on database? thanks
if youre update ur drive use Post if not u need to update to new dashboard and then flash
QUOTE(Yafeu @ Jun 14 2011, 11:54 PM)
If you have your drive key, load your drive's version of LT 1.9 (Post 13141 Folder) into the target FW and paste in your drive key, then flash..
Yes, XBINS is down.. when you try to connect, you'll notice a message telling you they have hardware issues.
Try google, ixtreme . net even
Yafeu check ur PM bro
Post by: harminoff on June 14, 2011, 10:41:00 PM
I appreciate any help, thanks guys.
Post by: ichigoxxx on June 14, 2011, 10:43:00 PM
Post by: Slateboard on June 14, 2011, 11:32:00 PM
Post by: Ryououki on June 14, 2011, 11:35:00 PM
QUOTE(Yafeu @ Jun 14 2011, 07:54 PM)
If you have your drive key, load your drive's version of LT 1.9 (Post 13141 Folder) into the target FW and paste in your drive key, then flash..
Is this safe since it doesn't copy any of the other data? Or is the other data not needed any longer?
Post by: ThaCrip on June 14, 2011, 11:55:00 PM
QUOTE(Slateboard @ Jun 15 2011, 12:32 AM)
Has the Lite-On 9504 Slim LT+ 1.9 come out yet?
Yes (for Liteon 9504 slim). it's all in the firmware pack i just downloaded.
p.s. i got a Samsung myself though. i might just wait for v2.0 since i probably won't need to get on live anytime soon anyways.
Post by: Sepioth on June 14, 2011, 11:59:00 PM
So I set my Liteon 74850c back to Stock firmware and updated my dash.
I take my original firmware (dummy.bin) and set that as the Source.
I take the FW from Liteon (Phat) Post 13141 (LTPlus-025v1.9.bin) and set as target.
When I go to spoof source to target it does not copy over ID strings or serial info.
After the dash update my stock FW is now a 0251 drive. My old FW with key is 7485. Do I need to extract a proper set of FW files again or is it safe to go ahead and flash this new FW without all the info.
Post by: scrimpus on June 15, 2011, 12:25:00 AM
QUOTE(Sepioth @ Jun 15 2011, 01:59 AM)
OK .. some help please ...
So I set my Liteon 74850c back to Stock firmware and updated my dash.
I take my original firmware (dummy.bin) and set that as the Source.
I take the FW from Liteon (Phat) Post 13141 (LTPlus-025v1.9.bin) and set as target.
When I go to spoof source to target it does not copy over ID strings or serial info.
After the dash update my stock FW is now a 0251 drive. My old FW with key is 7485. Do I need to extract a proper set of FW files again or is it safe to go ahead and flash this new FW without all the info.
I flashed my 74850c with this method and backups are loading, i have connected to xbl and so far xval says im not flagged, but I would also like a difinitive answer regarding the ID strings and serial info.
Post by: Waffles13 on June 15, 2011, 12:52:00 AM
EDIT: I totally forgot to plug my HDD back in. Derp.
This post has been edited by Waffles13: Jun 15 2011, 07:53 AM
Post by: bullka on June 15, 2011, 12:52:00 AM
Should I flash back to OFW before updating the Dash or is it safe flash to LT+1.9 and then update the dash?
Thanks!
Post by: Sepioth on June 15, 2011, 12:56:00 AM
Post by: ddsdavey on June 15, 2011, 02:10:00 AM
QUOTE(360ModNation @ Jun 15 2011, 03:16 AM)
Why not release LT+ v1.9 for 9504 drives as well they have been in testing for longer than these and are purportedly done. They don't have any write protection as far as I know and I know they don't if they haven't been updated which mine hasn't.
Well if you release one we will be ok then wont we buddy!
Post by: jkd37 on June 15, 2011, 02:15:00 AM
Post by: xmun on June 15, 2011, 02:51:00 AM
1) In what order shall I install dash / flash 1.9+? New Dash, then 1.9+ ? or other way around?
2) Should one restore OFW before updating to New Dash ?
3) After updating to new dash, would it be important to take a new OFW rip as I don't have the expertise/tools to do this myself and if so, what is the risk of not doing this?
4) If OFW is restored, does one need to solder/ use tools to flash new LT+1.9?
Thanks and sorry if this has been asked before. Bit paranoid!
Post by: OggyUK on June 15, 2011, 03:39:00 AM
1c000
etc are just the sectors in which the keys are stored.
It's not really relevant.
Post by: bullka on June 15, 2011, 04:51:00 AM
QUOTE(xmun @ Jun 15 2011, 10:51 AM)
Searched around and not sure this has been answered yet: I have a Phat LiteOn 93450C with LT1.1+ without latest dash
1) In what order shall I install dash / flash 1.9+? New Dash, then 1.9+ ? or other way around?
2) Should one restore OFW before updating to New Dash ?
3) After updating to new dash, would it be important to take a new OFW rip as I don't have the expertise/tools to do this myself and if so, what is the risk of not doing this?
4) If OFW is restored, does one need to solder/ use tools to flash new LT+1.9?
Thanks and sorry if this has been asked before. Bit paranoid!
1) New Dash and then LT+ v1.9.
2) You can skip restoring OFW before the Dash update. But you will be safer if you will restore OFW prior the DB update. No one knows if MS checks the FW during the update process. So it's up to you.
3) You don't have to read the new FW as long as you have the DVD Key. I assume you have it. Right?
4) No. Once you have your OFW and DVD key, you don't need to read it ever again. So no soldering. And FW write process doesn't require soldering.
Post by: Meccs on June 15, 2011, 04:58:00 AM
This post has been edited by Meccs: Jun 15 2011, 11:58 AM
Post by: Xaeonis on June 15, 2011, 05:20:00 AM
Followed these steps, as I still have my keys from both consoles. Both consoles are NOT updated as start of procedure.
1 - remove DVD drive from console, flash back to stock (using firmware from pack - pre-update OFW)
2 - put dvd drive back into console
3 - boot console up, connect to live
4 - get prompted for update, proceed to update (takes a bit)
5 - once update is complete, shut down console
6 - remove dvd drive, flash to ix-lt1.9 (remember, I have my keys saved, so this is simple in JF)
7 - put dvd drive back into console
8 - boot console back up, connect to live, and put in a burned game (for this, I used MK)
9 (optional) - checked xval flags, all seemed normal.
Everything seemed to go smoothly on my end, but then again, the biggest part of this is making sure you have your keys.
Burning off a new copy of MW2 as Ive been missing shooting people in the head and I feel after about a month of not playing, Im gonna be RUSTY!
Post by: .:Dino:. on June 15, 2011, 06:35:00 AM
Console was 12625 liteon with lx 1.1
1.) Open dummy.bin to get existing keys/info.
2.) Spoof keys etc into pre OFW version A, check the hardware info to determine which version
3.) Write OFW to drive.
4.) Boot and update on live (takes a while, drive makes some noise while ms plays with it
)5.) Verify originals work and backups dont
6.) Spoof keys etc into 1.9 CFW and write to drive
7.) Boot and verify originals and backups now work.
8.) Spend hours reburning for the new ap25 challenges
Thanks c4e/team jungle/team xecuter and to all those involved
Post by: .:Dino:. on June 15, 2011, 06:57:00 AM
QUOTE
Is this safe since it doesn't copy any of the other data? Or is the other data not needed any longer?
From what i understand, the serial/barcode data is no longer present in the firmware the update writes, and so is no longer needed in the new firmware series. It was previously considered to be information left on from manufacturer, and true to this it seems it is not needed.
All you need then is the drive key, as 1.9 does not use calibration data, same as with the new ofw.
Hope that helps
Post by: omegastar on June 15, 2011, 08:06:00 AM
QUOTE(Slateboard @ Jun 15 2011, 01:32 AM)
Has the Lite-On 9504 Slim LT+ 1.9 come out yet?
QUOTE(ThaCrip @ Jun 15 2011, 01:55 AM)
Yes (for Liteon 9504 slim). it's all in the firmware pack i just downloaded.
p.s. i got a Samsung myself though. i might just wait for v2.0 since i probably won't need to get on live anytime soon anyways.
I dont believe it has if you look more closely at whats in the LiteOn (Slim) folder is only OFW in 0272 and 9504 and 9504 LTPlus1.1 not 1.9 all other folders are empty.
This post has been edited by omegastar: Jun 15 2011, 03:08 PM
Post by: mat1c on June 15, 2011, 09:01:00 AM
This post has been edited by mat1c: Jun 15 2011, 04:03 PM
Post by: WackyBacky on June 15, 2011, 09:03:00 AM
QUOTE(mat1c @ Jun 15 2011, 04:01 PM)
WackyBacky: after the newest dashboard update, all lite-on drives have the 025 firmware so there are no longer specifics (74850, etc etc). as far as the key, you should have it stored somewhere or simply redump it. jungleflasher might be looking for it in a specific spot and its no longer there (the dash update moves the key, remember?).
Thanks man. I sorted the dvd key. for everyone having this problem go to DVDKey 32 tab and click Dummy from key DB, save all the files and your sweet! it now is verified
And thanks again mat1c, i was just about to shit myself!
Post by: Bleckshire on June 15, 2011, 09:14:00 AM
Post by: thor99 on June 15, 2011, 09:26:00 AM
QUOTE(Bleckshire @ Jun 15 2011, 04:14 PM)
Flashed and working fine. It's great to be back on Live. Thanks C4Eva.
I second that.. (IMG:style_emoticons/default/beerchug.gif)
Post by: astr4twin on June 15, 2011, 10:30:00 AM
orig-74850C-1a000.bin
orig-74850C-1b000.bin
orig-74850C-1c000.bin
orig-74850C-1e000.bin
Just confused me a little when presented with the four choices.
Thank you in advance.
Edit: Figured it out now, just downloaded stock FW somewhere else which just had one file (IMG:style_emoticons/default/smile.gif)
This post has been edited by astr4twin: Jun 15 2011, 06:01 PM
Post by: xboxdawg on June 15, 2011, 11:04:00 AM
QUOTE(astr4twin @ Jun 15 2011, 05:30 PM)
Would anyone be so kind as to tell me which file i should use to flash back to stock on a Lite-On 748590C Drive please.
orig-74850C-1a000.bin
orig-74850C-1b000.bin
orig-74850C-1c000.bin
orig-74850C-1e000.bin
Just confused me a little when presented with the four choices.
Thank you in advance.
My best guess (and with the Benq it is clearer) is that it's based on the address of your key in your dummy.bin. Bring up dummy.bin as your source in Jungleflasher. Right above the key it should say: DVD Key @ A030 or something similar.
I am assuming if it's an A you use 1a000.bin. If it starts with B use 1b000.bin and so on.
If I have assumed wrong someone please correct me.
Post by: DMagic1 on June 15, 2011, 11:06:00 AM
Post by: jamiebarrington on June 15, 2011, 11:24:00 AM
Im gunna flash my 93450C with LT+ 1.9 tonight, should i flash then accept update or accept the update then flash? as if i accepted the update first they would find out its modded an ban me right? aswell as re-flash my drive
Thanks, Jamie.
Post by: Hitokiri-Snake on June 15, 2011, 11:50:00 AM
QUOTE(jamiebarrington @ Jun 15 2011, 01:24 PM)
Hi people,
Im gunna flash my 93450C with LT+ 1.9 tonight, should i flash then accept update or accept the update then flash? as if i accepted the update first they would find out its modded an ban me right? aswell as re-flash my drive
Thanks, Jamie.
You have to flash after you update your dashboard. If you flashed your drive before, the update would just overwrite your firmware with stock firmware. If you have the ability to do so, I would flash back to stock before you update your dashboard just in case MS is checking firmwares. We don't believe that it's even possible to check the firmware of a liteon, but ya never know. It just seems safer to me.
Post by: jamiebarrington on June 15, 2011, 12:21:00 PM
QUOTE(Hitokiri-Snake @ Jun 15 2011, 06:50 PM)
You have to flash after you update your dashboard. If you flashed your drive before, the update would just overwrite your firmware with stock firmware. If you have the ability to do so, I would flash back to stock before you update your dashboard just in case MS is checking firmwares. We don't believe that it's even possible to check the firmware of a liteon, but ya never know. It just seems safer to me.
Thanks alot for that, only problem is i dont have my stock fw (IMG:style_emoticons/default/sad.gif) is this something that is downloadable somewhere?
Post by: CanuckGod on June 15, 2011, 12:35:00 PM
QUOTE(jamiebarrington @ Jun 15 2011, 12:21 PM)
Thanks alot for that, only problem is i dont have my stock fw (IMG:style_emoticons/default/sad.gif) is this something that is downloadable somewhere?
If you've found the firmware package, there should be a set of stock firmwares for your particular drive, all you need is the drive key from your modded firmware, and you can just spoof the stock firmware in JungleFlasher with your drive's key, then flash that to the drive, replace in your Xbox, run the dashboard update, then flash the drive with LT+ 1.9 and you should be good. Though it's doubtful MS detects your drive anyhow, better safe than sorry, that's how I did it with my Benq (LT+ 1.1>stock>upgrade>LT+ 1.9). Good luck!
This post has been edited by CanuckGod: Jun 15 2011, 07:38 PM
Post by: fredfunk on June 15, 2011, 12:38:00 PM
QUOTE(djgook @ Jun 15 2011, 02:37 AM)
So which Benq do I use? Post or Pre?? Whats the difference?
Which one is it then for Benq pre or post ?
This post has been edited by fredfunk: Jun 15 2011, 07:41 PM
Post by: CanuckGod on June 15, 2011, 12:45:00 PM
If you haven't updated to the new dashboard yet, you'll want the pre-13141 firmware. If you already have upgraded, you'll want the post. Though if you haven't upgraded yet, your best bet is to use Jungleflasher and reflash your Benq to stock, using the OFW firmware in the firmware bundle under the pre-13141 directory, spoofing the drivekey from your modded firmware to the stock firmware, flash, then do the upgrade. You could always directly flash either pre-or-post dashboard upgrade to the 1.9 firmware, but the chances of MS detecting your firmware increase.
Post by: hewligun on June 15, 2011, 12:58:00 PM
Thanks in advance.
Post by: ichigoxxx on June 15, 2011, 01:25:00 PM
Post by: ca102455 on June 15, 2011, 01:27:00 PM
Well done
Post by: krizalid on June 15, 2011, 03:01:00 PM
Seems like nobody reads the FAQs, nobody cares about info, all they do is wait for a release and start flooding the threads with questions that have all ready been answered a million motha fa-king times!!!
Incredible!!! What's the Estimated IQ of the users here again? (IMG:style_emoticons/default/blink.gif)
Here are the funniest posts ever in this thread:
QUOTE(stuntz0rZ)
Can anyone please explain about the ap 2.5 games needing patching?
Defosho linked the correct way:here
QUOTE(Modify inc)
Are there any instructions/guides or is it to early?
Really? Have you not ever been reading the threads about AP25, 13146 Update or any of this before this release?
QUOTE(bullka)
Hi,
Should I flash back to OFW before updating the Dash or is it safe flash to LT+1.9 and then update the dash?
Thanks!
Should I flash back to OFW before updating the Dash or is it safe flash to LT+1.9 and then update the dash?
Thanks!
Here's another good old user of XS who doesn't read the FAQs!
Now this is NOT a dumb question, so I'll answer it:
QUOTE(UnnA^)
Also wondering how i find out what version of the 7xxx series lite-on i have?
orig-74850C-1a000
orig-74850C-1b000
orig-74850C-1c000
orig-74850C-1e000
Which one do i use to flash back to stock?
Thanks.
orig-74850C-1a000
orig-74850C-1b000
orig-74850C-1c000
orig-74850C-1e000
Which one do i use to flash back to stock?
Thanks.
Since Dummy will not show this data and you wonder where the hell will the key go?
Well, you may simply just choose any, cause any will work, but if you open your Lite_CFW.bin that you
used for flashing your console, you will see above your key area this info, than you may choose the one equivalent to where it's currently flashed at.
Here's the best post ever!! It's not from this thread, it's from the JungleFlasher 184 Release:
QUOTE(rulevoid)
QUOTE(tomgreen99200)
Flash back to stock, make the update, and then flash to LT+1.9.
Do you have a reputable source for that suggestion? Not being mean just curious.
Gosh, gotta take a break! (IMG:style_emoticons/default/happy.gif)
This post has been edited by krizalid: Jun 15 2011, 10:03 PM
Post by: wickywicky on June 15, 2011, 03:03:00 PM
i have samsung ms25, i flashed back to stock but when i loaded lt 1.9 it shows up as ms28 and i have to spoof to ms25. is this ok? can it be spoofed with lastest dash and lt v1.9 firmware?
thanks in advance!
wickywicky
Post by: krizalid on June 15, 2011, 03:10:00 PM
Since you updated and your firmware is now an MS28P...solmething, well, you stick to that. Never spoof to MS25 again.
To be more precise, never spoof your firmware again.
This post has been edited by krizalid: Jun 15 2011, 10:28 PM
Post by: valius on June 15, 2011, 05:56:00 PM
QUOTE(wickywicky @ Jun 15 2011, 10:03 PM)
ok so i have a question.
i have samsung ms25, i flashed back to stock but when i loaded lt 1.9 it shows up as ms28 and i have to spoof to ms25. is this ok? can it be spoofed with lastest dash and lt v1.9 firmware?
thanks in advance!
wickywicky
I restored my ms25 fw to stock before updating, after the dash update I read & saved the new fw.
It shows the drive revision as ms25 & the OSIG also as ms25
The fw that C4eva modified is from a ms28 drive, I have spoofed it to match the original ms25 revision & OSIG as thats what my stock fw was showing after the dash update.
QUOTE(krizalid @ Jun 15 2011, 10:10 PM)
No sir, you don't go by what your hardware says, but what your firmware says.
Since you updated and your firmware is now an MS28P...solmething, well, you stick to that. Never spoof to MS25 again.
To be more precise, never spoof your firmware again.
I don't fully understand what you mean, could you go into a bit more detail?
Why should he not spoof the drive fw to match his drive version?
If anyone else has any thoughts on this then please chip them in (IMG:style_emoticons/default/smile.gif)
Post by: ichigoxxx on June 15, 2011, 06:21:00 PM
Post by: krizalid on June 15, 2011, 08:51:00 PM
Things are simple as they are read if they are read carefully.
Post by: death69inc on June 15, 2011, 09:33:00 PM
either case
it may have been asked and i have not ran accross it but since this is the 3rd time ill be patching a game for firmware changes i want to ask
after we patch this time will i need to patch agian when 2.0 comes out?
or will it depend on microcrap and them changing the ap checks only?
I have yet to find patches so in turn currently this fw is useless?
This post has been edited by death69inc: Jun 16 2011, 05:06 AM
Post by: krizalid on June 15, 2011, 10:18:00 PM
QUOTE(death69inc @ Jun 15 2011, 10:33 PM)
after we patch this time will i need to patch agian when 2.0 comes out?
Here's your answer:
QUOTE(death69inc @ Jun 15 2011, 10:33 PM)
or will it depend on microcrap and them changing the ap checks only?
AP25 Challenge Table.
QUOTE(death69inc @ Jun 15 2011, 10:33 PM)
I have yet to find patches so in turn currently this fw is useless?
AGBX is also updated as stated in the release of this firmware.
Post by: death69inc on June 15, 2011, 10:33:00 PM
thanks for info
doesnt bother me that bad i have a jtag for personal use
just want to make sure this flash is working
and sbgx 1.0.2 is the newest version?
This post has been edited by death69inc: Jun 16 2011, 05:47 AM
Post by: Takashi on June 15, 2011, 10:53:00 PM
http://www.abgx360.net/download.php
Post by: death69inc on June 15, 2011, 11:05:00 PM
and i was in middle of a convo so i asked
Post by: EpsilonMirror on June 16, 2011, 01:28:00 AM
If this is the case, and knowing that the new stock firmwares don't have anything to do with xgd3 since the hitachis can still read the discs, is it possible that these new firmwares are completely written by MS using technical docs supplied by the drive manufacturers? It seems like that would get them around the legal issue of reading the firmwares(if it even exists), thus allowing them to do so in future updates. I feel like that would explain the lack of a new firmware for the hitachis, since they are apparently a pain and there are probably very few left in the wild that aren't either in banned or rrod consoles.
Again, It was just a thought I had and I'm not entirely sure it is correct at all.
Post by: .:Dino:. on June 16, 2011, 02:10:00 AM
Post by: EpsilonMirror on June 16, 2011, 02:15:00 AM
QUOTE(.:Dino:. @ Jun 16 2011, 09:10 AM) 
As far as i know, the issue was not so much legal as it is suitable. Firmware flashing involves an element of risk, and it was considered that ms flashing drive firmware would be considered a risky one for those without modded consoles. A corrupt firmware write means a lot of money for ms with repairs and people sending their consoles in due to issues with the update.
I can understand that about flashing, but I was mainly referring to dumping the firmwares, that specifically is what I remember being a legal problem(again I could be completely wrong about that). The thought came up because so many people seem to be worrying about the 360 sending back a dump of their pre-update firmwares and suggesting flashing back to stock before updating.
Post by: pt6 on June 16, 2011, 02:33:00 AM
I successfully flashed LT 1.9 on my phat LiteOn, but I wanted to report somethings strange i encountered...
I was on LT Plus and wanted to flash back to stock firmware before updating the dash and then flashing to LT Plus 1.9...
So I tried to flash my orig fw dump... the flash went through and appeared to be successful but I could not eject the dvd tray anymore...
so I flashed the fw in the OW folder in LiteOn_Post_13141... I know it's the wrong fw since i was pre dash update...
the flash went through successfully (was able to eject tray)...
I then updated the dash successfully, and here's the strange thing:
I inserted my original Halo Reach and the dvd drive did not recognize it and displayed PLAY DVD. I tried my original Halo ODST, same thing... I tried a backup, same thing...
very strange to me since the dash update flashed a stock fw onto the drive and originals should work... no idea what happened here...
I then flashed LT Plus 1.9 successfully and now originals and backups work...
anyways, thanx C4Eva - great work !
Post by: kuiponok on June 16, 2011, 03:07:00 AM
QUOTE(death69inc @ Jun 16 2011, 07:05 AM)
because i dl from there didnt know the gui was still stating 1.0.2
and i was in middle of a convo so i asked
Download this: http://www.megaupload.com/?d=CP36Q2GG
Extract en replace (make backup first!) the abgx360gui.exe with the one you downloaded, and then de GUI shows up as v.1.0.5 also.
Doesn't change anything else, but it looks nicer
I didn't made this myself, but downloaded it a while ago...
Post by: driftfox on June 16, 2011, 03:08:00 AM
QUOTE(Yafeu @ Jun 15 2011, 04:54 AM)
If you have your drive key, load your drive's version of LT 1.9 (Post 13141 Folder) into the target FW and paste in your drive key, then flash..
QUOTE(Ryououki @ Jun 15 2011, 06:35 AM)
Is this safe since it doesn't copy any of the other data? Or is the other data not needed any longer?
QUOTE(.:Dino:. @ Jun 15 2011, 01:57 PM)
From what i understand, the serial/barcode data is no longer present in the firmware the update writes, and so is no longer needed in the new firmware series. It was previously considered to be information left on from manufacturer, and true to this it seems it is not needed.
All you need then is the drive key, as 1.9 does not use calibration data, same as with the new ofw.
Hope that helps
I was wondering the very same thing and wanted to do some tests to see if I could find out just how true this was, so I created several custom firmwares (Phat Liteon LT+ 1.9) using different methods and compared the output files (both CRC and with HxD). This is what I found out:
MY SETUP:
Liteon 83850c V2
JungleFlasher 0.1.84 Beta
CUSTOM FIRMWARES:
Source 1: File dumped from OFW pre-13146 using MRA
Output file CRC: 88359E84
Source 2: File dumped from OFW post-13146 using MRA
Output file CRC: 88359E84
Source 3: Dummy file dumped from OFW post-13146 using PMT
Output file CRC: 88359E84
Source 4: Dummy from KeyDB
Output file CRC: 88359E84
Source 5: Just pasting in my key in JungleFlasher
Output file CRC: 88359E84
From what I can tell, Yafeu and .:Dino:. are correct. For anyone who cares, does it seem like these findings actually support their statements, or have I overlooked something in my tests?
Post by: pudink on June 16, 2011, 04:05:00 AM
thanks
Post by: Rammieone on June 16, 2011, 04:34:00 AM
Post by: astr4twin on June 16, 2011, 01:24:00 PM
QUOTE(EpsilonMirror @ Jun 16 2011, 08:28 AM)
I don't think I've seen anyone mention anything like this, but I had a thought. And please anyone more knowledgeable, feel free to chime in and correct me if I'm wrong. I seem to remember someone saying that MS couldn't dump drive firmware because of legal reasons, something about them not owning the firmware.(I honestly can't remember who said it, but I think it was a scene dev)
If this is the case, and knowing that the new stock firmwares don't have anything to do with xgd3 since the hitachis can still read the discs, is it possible that these new firmwares are completely written by MS using technical docs supplied by the drive manufacturers? It seems like that would get them around the legal issue of reading the firmwares(if it even exists), thus allowing them to do so in future updates. I feel like that would explain the lack of a new firmware for the hitachis, since they are apparently a pain and there are probably very few left in the wild that aren't either in banned or rrod consoles.
Again, It was just a thought I had and I'm not entirely sure it is correct at all.
I was being a little paranoid myself with a thought i had. I was thinking how nearly everyone would be reflashing and accepting the new dashboard update on the same day. I would guess M$ could log to see all those consoles that stayed off live suddenly accept their update and start playing on live again on the same day. Of course this wouldnt be proof for them as someone who has always been on stock could also be updating on the same day but it just makes me think, maybe were all on the watch list
Post by: .:Dino:. on June 17, 2011, 03:10:00 AM
Post by: sminitis on June 17, 2011, 06:43:00 AM
Post by: Hitokiri-Snake on June 17, 2011, 10:20:00 AM
QUOTE(pt6 @ Jun 16 2011, 04:33 AM)
hey,
I successfully flashed LT 1.9 on my phat LiteOn, but I wanted to report somethings strange i encountered...
I was on LT Plus and wanted to flash back to stock firmware before updating the dash and then flashing to LT Plus 1.9...
So I tried to flash my orig fw dump... the flash went through and appeared to be successful but I could not eject the dvd tray anymore...
so I flashed the fw in the OW folder in LiteOn_Post_13141... I know it's the wrong fw since i was pre dash update...
the flash went through successfully (was able to eject tray)...
I then updated the dash successfully, and here's the strange thing:
I inserted my original Halo Reach and the dvd drive did not recognize it and displayed PLAY DVD. I tried my original Halo ODST, same thing... I tried a backup, same thing...
very strange to me since the dash update flashed a stock fw onto the drive and originals should work... no idea what happened here...
I then flashed LT Plus 1.9 successfully and now originals and backups work...
anyways, thanx C4Eva - great work !
Did you remember to use your DVD key when you flashed the firmware from the LiteOn_Post_13141 folder? No DVD key = Play DVD. That's the only thing I can think of
Post by: jedijakeyboy on June 17, 2011, 03:33:00 PM
I am a little confused if this is live safe or not. I thought it was not and that the 2.0fw will be..??
If this is safe what will the difference be from 1.9 to 2.0?
Post by: X4life3 on June 17, 2011, 04:01:00 PM
QUOTE(jedijakeyboy @ Jun 17 2011, 05:33 PM)
Thanks for the release C4e......
I am a little confused if this is live safe or not. I thought it was not and that the 2.0fw will be..??
If this is safe what will the difference be from 1.9 to 2.0?
Yes it is live safe, that is why C4E made 1.9 so people could go back online using backups, if it wasnt live safe there would be no point to it as LT+ 1.1 isnt live safe and you can use it to play on the new dash but you will most likely get flagged for a ban. I think 2.0 is the same thing but will allow you to play using the new disk format.
Post by: sugarshane on June 17, 2011, 07:47:00 PM
Post by: xD34DL1N3Rx on June 17, 2011, 08:58:00 PM
QUOTE(sugarshane @ Jun 17 2011, 08:47 PM)
Ok..... Some insight would be really helpful here. I have the old LT+ firmware and haven't updated yet. Should I update first and then flash? Or should I just flash now and then do the update?
I believe the preferred method is re-flash to stock fw, update, flash to lt+ 1.9.
Post by: fredfunk on June 18, 2011, 12:34:00 PM
Got Benq and Liteon 74850C
I do not play online
I have my modded firmware on my system, can I just patch both firmwares write to drives and will this work using the post method firmware?
Post by: 4DoorITR on June 18, 2011, 04:47:00 PM
Post by: OggyUK on June 18, 2011, 04:59:00 PM
What bits differed in a hex compare?
Post by: zyo on June 18, 2011, 05:06:00 PM
Post by: 4DoorITR on June 18, 2011, 07:47:00 PM
QUOTE(OggyUK @ Jun 18 2011, 05:59 PM)
It should be the same, its taken from the system update itself.
What bits differed in a hex compare?
In total commander 1C000 - 1CFF8, which is where the key is stored. I'm not sure what else might be there.
Post by: bidrug on June 18, 2011, 09:19:00 PM
All lite on models can be flashed with the very same firmware? are they all upgraded to the same version?
Post by: f575gtc on June 18, 2011, 10:30:00 PM
updated, then re flashed to 1.9LT
I signed into xbox live fine, but I went to use Netflix and I was prompted for another update and when I try to download it, the progress bar is very slow so I canceled the download.
is this another update from MS or is it an update that does take a while and is ok to run with 1.9LT
Post by: kami623 on June 18, 2011, 11:10:00 PM
QUOTE(bidrug @ Jun 18 2011, 11:19 PM)
I'm trying to flash a 93450c, but the only file I'm able to find is LTPlus-025v1.9.bin
All lite on models can be flashed with the very same firmware? are they all upgraded to the same version?
Yes, all Liteons are updated to the same firmware.
QUOTE(f575gtc @ Jun 19 2011, 12:30 AM)
Guys, I just flashed back to stock
updated, then re flashed to 1.9LT
I signed into xbox live fine, but I went to use Netflix and I was prompted for another update and when I try to download it, the progress bar is very slow so I canceled the download.
is this another update from MS or is it an update that does take a while and is ok to run with 1.9LT
It's safe. It's just a title update for Netflix.
Post by: OggyUK on June 19, 2011, 03:26:00 AM
QUOTE(4DoorITR @ Jun 19 2011, 02:47 AM)
In total commander 1C000 - 1CFF8, which is where the key is stored. I'm not sure what else might be there.
That's the full key sector.
Post by: jamiebarrington on June 19, 2011, 03:33:00 AM
Just like to say thanks to C4eva and team jungle for all their hard work, if it wasn't for c4eva we would probabily be doomed and just off the fact that he lets out the firmwares for free for me means he is a legend
Post by: astr4twin on June 19, 2011, 05:24:00 AM
QUOTE(fredfunk @ Jun 18 2011, 07:34 PM)
Help please
Got Benq and Liteon 74850C
I do not play online
I have my modded firmware on my system, can I just patch both firmwares write to drives and will this work using the post method firmware?
Probably a bit late to tell you now but...
...If you dont plan on playing on live its pointless updating to 1.9 for now as all it is doing is making you live safe again. I would wait for LT2.0 to be released which will allow XGD3 backup support.
Post by: sminitis on June 19, 2011, 05:28:00 AM
Post by: heartshacker on June 19, 2011, 09:09:00 AM
Any idea why?
Post by: 4DoorITR on June 19, 2011, 06:22:00 PM
QUOTE(OggyUK @ Jun 19 2011, 04:26 AM)
That's the full key sector.
Do you know why when I spoof the key to orig-02510C-1c000 that the key sector still does not match my post 13146 dump?
Post by: scrimpus on June 19, 2011, 06:44:00 PM
QUOTE(heartshacker @ Jun 19 2011, 11:09 AM)
I updated the dashboard to 13146 and flashed to LT+ 1.9. I am able to play backup games. But when I try to connect to LIVE, it is asking for system update.
Any idea why?
did you have your hard drive attached when you updated?
Post by: mawfuca on June 21, 2011, 08:37:00 PM
This post has been edited by mawfuca: Jun 22 2011, 03:41 AM
Post by: deilzfcjk on June 22, 2011, 03:57:00 AM
Post by: mod_irl on June 22, 2011, 06:49:00 AM
QUOTE(deilzfcjk @ Jun 22 2011, 10:57 AM)
yeah buy another VGA cable. lol. I do not think that a ODD firmware flash will make your xbox 360 video output not work anymore
+1, its possible when you flashed it you could have shorted out somethinig on the motherboard that is causing this issue, but a standard flash wont cause this even if you mess it up.
Post by: delahmed on June 23, 2011, 07:53:00 AM
Updated my Liteon LT+1.0 back to stock, applied MS update, reflashed to 1.9 LT+.
Works a dream..... stayed offline since the May update so nice to be back on XBL.
Much appreciated.... Bless!
Post by: toddgei on June 24, 2011, 02:16:00 AM
One question is that when patching games with the new ap2.5 patches do we need clean images of the games or can we just repatch the previous image that was patched for the old ap2.5 challenges ?
Post by: dangerouseddy on June 24, 2011, 03:45:00 AM
QUOTE(toddgei @ Jun 24 2011, 09:16 AM)
I am updating to 1.9 over the weekend.
One question is that when patching games with the new ap2.5 patches do we need clean images of the games or can we just repatch the previous image that was patched for the old ap2.5 challenges ?
yes you can patch the images once you read the disc onto your hd. abgx will patch them to the new ap2.5 challenges
Post by: Shintax909 on June 25, 2011, 04:05:00 PM
Post by: 360ballin on July 03, 2011, 04:32:00 PM
so anyways, i plug up the drive to my computer to flash to lt1.9, hit benq unlock, read FW, but when I save it, the log shows:Dumped in 9333mS
Benq Dump file saved to BENQ-OFW2.bin
Loading firmware from buffer
Parse Failed !
Loading MTK_Flash source file
then when i try to load it as source, i get:Parse Failed !
Loading MTK_Flash source file
Loading firmware file C:\Documents and Settings\user\Desktop\BenQ iXtreme LT Plus v1.9\BenQ_Post_13141\OFW\BENQ-OFW2.bin
MD5 hash: 8b67d18052506f39255803814774af57
Parse Failed !
I also still have the original FW from the 1st time i flashed it, i can load that as source, and 1.9 as target, is it safe to use that?
This post has been edited by 360ballin: Jul 3 2011, 11:34 PM
Post by: driftfox on July 04, 2011, 11:02:00 AM
QUOTE(360ballin @ Jul 3 2011, 11:32 PM)
I also still have the original FW from the 1st time i flashed it, i can load that as source, and 1.9 as target, is it safe to use that?
That should work just fine. (See my previous post in this thread for why I'm saying this.)
Post by: hnk on July 11, 2011, 03:13:00 AM
Post by: totoz on July 11, 2011, 07:36:00 AM
see jungleflasher tutorial (pdf)
Post by: driftfox on July 11, 2011, 08:45:00 PM
QUOTE(hnk @ Jul 11 2011, 10:13 AM)
It might be a dumb question but need your help. My xbox updated to 13146 and cannot use my backups. I don't have the orginal dump or key as it was given to me by someone else. What are my options? Can I use the procedure to fix the issue. I have Benq drive. Apparecite your replies.
Yeah, this is no problem. Just follow the instructions in the JungleFlasher Tutorial (its a PDF file you can find online) or find someone in your area to do it for you.
Post by: hnk on July 12, 2011, 02:02:00 AM
Post by: spidey on October 19, 2011, 11:25:00 PM
I have had no problem modding the ps2/3 xbox original and the wii but this one has me stumped .
I guess I will buy the USBpro .
but I do have a PC to work with , what is the native SATA connection , i am curious.
Thanks again