Post by: ssss69696969 on September 09, 2010, 08:40:00 AM
Other thing is that when i try reading the 74850C's key, it says me bad serial data, although It recognise me the Liteon in windows, and ive also tried putting the spear into the R707 hole, and it says the same thing
I´m working on a Windows 7 64bits computer, and with jungleflasher 1.75
There is another problem and it is that the aditional funcionts check box, is always greyed and unchecked, there is no way of ungreying it
Anyone knows how to solve this?
Thanks
Post by: excaliburlives on September 09, 2010, 01:33:00 PM
Post by: ssss69696969 on September 09, 2010, 02:17:00 PM
Post by: iateshaggy on September 09, 2010, 04:19:00 PM
Post by: ssss69696969 on February 03, 2020, 12:22:00 AM
Post by: Buzzcut on February 03, 2020, 01:02:00 AM
64 bit is a bitch.
Post by: ssss69696969 on February 03, 2020, 01:48:00 AM
Ive tried it on MSDOS, and when i execute dvdkey, it says me that theres no data from COM port
Post by: headonism on February 03, 2020, 02:20:00 AM
com port properties on the same tab.
if it is seen then hit the refresh button next to the com port drop down tab, ...
now change from com 1 to com?
whatever else is now listed
this should now give u a dencent key Irrelavent of if the spear is constantly blue
This post has been edited by headonism: Yesterday, 10:20 AM
Post by: ssss69696969 on February 03, 2020, 02:37:00 AM
I have another port COM1, if i put it there it also dont work
Ive found another issue with the spear, if I power on the xtractor with the spear on R707, the blue light becomes less bright when i put the spear on R707, if I pull it out of R707, it becomes mucho more brighter
Post by: Krazzt on February 03, 2020, 12:14:00 PM
QUOTE(ssss69696969 @ Sep 9 2010, 03:40 PM) 
Hi everyone, I have a problem because when i connect the spear to the xtractor pro v2, the blue light becomes always blue, if i put it in the R707 it doesn´t change any color, it constantly maintains blue
Other thing is that when i try reading the 74850C's key, it says me bad serial data, although It recognise me the Liteon in windows, and ive also tried putting the spear into the R707 hole, and it says the same thing
I´m working on a Windows 7 64bits computer, and with jungleflasher 1.75
There is another problem and it is that the aditional funcionts check box, is always greyed and unchecked, there is no way of ungreying it
Anyone knows how to solve this?
Thanks
Does the drive respond properly to the Xtractor? If you hit eject does it eject the drive?
Also be sure to eject the drive, power off the extractor, push it half way in, then power it back on. That solved the bad serial data issue for me.
The fact that the spear always has the blue LED is peculiar. Something may be shorting, are you positive it is connected like so:
(IMG:http://imgur.com/1KuTM.png)
Taken from this manual:http://www.360xtractorpro.com/360xtractorpro/downloads/Manuales/Spear_manualv10.pdf
Post by: ssss69696969 on February 03, 2020, 02:06:00 PM
It continues telling me warning serial data is bad in windows, and in ms-dos, it says me that no data was tranfered to the port
The tray is half opened also, all the things should be in order!!! but it keeps annoying me with the error
Post by: ssss69696969 on February 04, 2020, 01:47:00 AM