Print Page - Discs Unreadable After Successful Flashing Lt V1.1 Using Jungleflasher

Hi everyone, just joined the site...

I followed the jungleflasher guide (180pg one) exactly and the flash was sucessful.
My 360 is the MW2 edition and the drive is the LITEON 83... v1

Here is the log:

CODE

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~

JungleFlasher 0.1.75 Beta (152)
Session Started Tue Aug 17 15:32:14 2010

This is a 32 bit process running on 8 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 14 I/O Ports.
Found 1 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives D:

Drive type Un-determined
Drive type Un-determined
Drive type Un-determined
Drive type Un-determined
Drive is Lite-On..
No Drive Detected! LO83info extraction aborted!

Drive is Lite-On..
No Drive Detected! LO83info extraction aborted!

Drive is Lite-On.. Drive is Lite-On.. 0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 35 30 35 30 43 2D 32 - 00 00 00 00 00 00 00 00 85050C-2........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Sending LO83info request to I/O port 0x0170
............
.
0000: 49 6E 20 44 65 64 69 63 - 61 74 69 6F 6E 20 54 6F In Dedication To
0010: 20 54 68 65 20 42 69 72 - 74 68 20 4F 66 20 4D 61  The Birth Of Ma
0020: 63 6B 61 79 20 4F 6E 20 - 46 65 62 72 75 61 72 79 ckay On February
0030: 20 54 77 65 6C 76 65 20 - 32 30 30 37 20 FF FF FF  Twelve 2007 ...
0040: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0050: 4D 49 4B 45 20 4C 4F 56 - 45 53 20 48 45 4C 45 4E MIKE LOVES HELEN
0060: 30 D7 96 83 38 64 06 D2 - A6 DD 8F 32 DB 9B AE 53 0...8d.....2...S

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 33 38 35 30 43 41 30 - 41 32 44 36 30 39 43 47 83850CA0A2D609CG
0030: 39 32 35 39 31 36 30 30 - 47 41 31 20 20 20 00 00 92591600GA1   ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Inquiry String saved to C:\Documents and Settings\me\Desktop\Inquiry.bin

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 35 30 35 30 43 2D 32 - 00 00 00 00 00 00 00 00 85050C-2........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 39 - 43 47 39 32 35 39 31 36 ....D609CG925916
0020: 30 30 47 41 31 20 20 20 - 00 00 00 00 00 00 33 38 00GA1   ......38
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0  LPSD    GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00               ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 20 20 00 00                                         ..

Identify String saved to C:\Documents and Settings\me\Desktop\Identify.bin

0000: 44 36 30 39 43 47 39 32 - 35 39 31 36 30 30 47 41 D609CG92591600GA
0010: 31 20 20 20 FF FF FF FF - 39 46 30 34 30 32 36 31 1   ....9F040261
0020: 31 36 44 30 31 34 58 58 - 41 30 FF FF 53 34 50 39 16D014XXA0..S4P9
0030: 36 30 39 30 30 30 30 30 - 30 34 39 33 38 32 00 00 60900000049382..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 32 FF FF ............A2..

Identify String saved to C:\Documents and Settings\me\Desktop\Serial.bin

Extracted drive key LOLOLOLOLOLOLOLOOOOLLOLOOLOLOLOL
Extracted drive key Passed Verification !

Key data saved to C:\Documents and Settings\me\Desktop\Key.bin

Dummy.bin file saved to Dummy.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 LOLOLOLOLOLOLOLOOOOLLOLOOLOLOLOL
Firmware Osig: [PLDS    DG-16D2S        8385]
Firmware is:  LO83info Extract
Key added to database

Auto-Loading firmware file E:\JungleFlasher v0.1.75 Beta (152)\firmware\ix-ltv1.1-838.bin
MD5 hash:  7eb4e4ceeb720e24e6c1a77e4e2a66ae
Genuine iXtreme Lite-Touch 1.1
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS    DG-16D2S        8385]
Firmware is:  iXtreme LT 1.1
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data copied from Source to Target
No Calibration data in source

Target f/w saved as: Lite_CFW.bin

Sending Lite-On-Erase request to port 0x0170
..............
Drive returned Status 0xD0
..........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name:  MXIC(MX25L2005)
Flash Size:  262144 bytes

Getting Status from port 0x0170
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0170
Erasing:............
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0170
Drive is Lite-On..

Drive powered by 360.
360 grounded to pc chassis.
Used intel sata chipset.
ensured half open, etc

I put the 360 back together and took it to test it and make sure it works. I put in original MW2 (also installed on HDD) and sure enough it booted and I played Spec Ops for like 5mins. Then, after burning Blur at 2.4X onto a Windata DVD+R DL I put that in and sure enough, it worked like a charm. I did the first race then I turned off the console. About an hour later, I turned it on, took out blur and put in original Resident Evil 5 and the game got to the cutscenes and it gave me a dirty disc error. I put in original Gear of War 2 and it gave me "open tray" close tray etc. I put in blur and after turning the xbox on and off many times, it loaded and i played it, it didn't freeze or give an error. Thinking the problem was solved, i put in Res evil 5 and it loaded the beginning and it only showed subtitles (no video) and immediately gave disc read error.

I have no idea what is wrong, I did some internet research and the only thing I found was that if you don't unplug the ribbon cable to the laser it will burn it out. Some people say the flash is bad, but according to JF, its perfect. I still have the DVD key and all the dummy.bin stuff so I'm not sure what I should try next.

Currently I am going to leave the 360 unplugged until morning and let it power cycle. If it is the laser, can you guide me on a cheap quality replacement?

I dont know who to ask!!!!

I didn't use a probe or anyhting... Just SATA connection. At first it would only show up in BIOS but not in JF running in Win7 x64 so I ended up installing XP onto a spare drive and it show up in JF after a couple attempts.

This is exactly what I did:

1. Find drive i/o port
2. click lo83info
3. tray half open stuff
4. got key, saved files
5. loaded dummy.bin in firmwaretool32, autoloaded ixtreme
6. erased drive (clicked erase liteon, power off/on, success) ---> vendor mode
7. click write, successful
8. outro reset

I don't understand why the backups and the originals would still occasionally boot if the keys were incorrectly flashed. If the the flash was incorrect then why would it load at all?

I saved to file my hacked fw.

What should I do now? how do I reflash the drive? And does JF work in win7 x64? because i just fixed the raid0 array after installing xp on the spare drive i had

I appreciate any guidance, its a great forum you've got, I've been reading for weeks until I signed up today.
defragger

*****Drivekey replaced with LOLOLOLOLOLOLOLOOOOLLOLOOLOLOLOL for privacy reasons.

This post has been edited by defragger: Aug 18 2010, 05:19 PM

If both originals and backups only play once in a blue moon then it's your laser. If you're in the UK then modtraders.co.uk are pretty good but no clue about the US. A BenQ laser will fit just as well.

Yeah, It's your laser, I bet. I don't get it, I've seen numerous people like you. It's like they are flashing their drives in a farm or some dusty sh*t (IMG:style_emoticons/default/tongue.gif)

so the "unplug the ribbon cable" wasn't a myth?

Is this good: http://cgi.ebay.com/Xbox-360-HOP-141x-141B...#ht_1327wt_1137 ??

Also, I want to buy a good spare DVD drive just in case, what should I get? Does it have to be liteon?

I would be trying a pot tweak and a lens clean on the drive before buying a new one. Also, if you do have reading problems, the first thing you should be doing is binning the cheap disks and using Verbs.

tried the pot tweak today, and it worked for maybe 20 minutes... so i ordered the laser off ebay

i'm gonna return the windata discs and go buy some verbatims when i get a chance.

So many people have read errors after flash with liteon its ridiculous. I'm pretty confused as whether its ESD, shorted contact, lack of laser calibration, weak/shitty laser....

idk but im gonna give the new one a shot and then its time for a new drive

I'd like to post an update for anyone that has been HAVING THIS PROBLEM!

PROBLEM: SOLVED

I purchased the laser lens assembly off of ebay and after swapping the lasers, its reading perfectly!

xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: defragger on August 18, 2010, 10:11:00 AM