Post by: DataMark on February 05, 2010, 03:13:00 AM
Any advice would be very helpful
Post by: totoz on February 05, 2010, 04:10:00 AM
once u get the liteon key it's a piece of cake upgrading (need only erase and write), so don't buy a benq
This post has been edited by totoz: Feb 5 2010, 12:11 PM
Post by: edlimym on February 05, 2010, 05:14:00 AM
QUOTE(DataMark @ Feb 5 2010, 06:13 PM) 
What extacly are the best way to mod the 93450C to run backups and what is the best option i was planning on going the route of getting the liteon key and buying a benq and spoofing as benqs are very straight forward to flash and would make life easier later on for future upgrades.
Any advice would be very helpful
hi there. that is what i did for my elite xbox but i get someone to mod my drive because my skill level is no good. once i got that key, i bought a benq drive from ebay and flash that key to it. thereafter, no worries. btw, i do not go Live at all for gaming but just go there and browse around only. cheers!!
Post by: saleem_hacks_360s on February 05, 2010, 05:25:00 AM
its the original drive and the flash method is pretty much the same.
i would recommend you hexedit the calibration info from your 93450 original dump to the ixtreme lt fw before you flash it over,especialy if you intend to use live.
(IMG:style_emoticons/default/smile.gif)
Post by: LittleBH on February 05, 2010, 07:14:00 AM
QUOTE
i would recommend you hexedit the calibration info from your 93450 original dump to the ixtreme lt fw before you flash it over,especialy if you intend to use live.
(IMG:style_emoticons/default/smile.gif)
Firstly the current version of Jungleflasher already copies that info over,
secondly the info is considered to be useless and not used by the drive at all (manufacturing test data!)
This post has been edited by LittleBH: Feb 5 2010, 03:15 PM
Post by: shtewps on February 05, 2010, 07:35:00 AM
QUOTE(LittleBH @ Feb 5 2010, 03:14 PM)
Firstly the current version of Jungleflasher already copies that info over,
secondly the info is considered to be useless and not used by the drive at all (manufacturing test data!)
Firstly.. JF does NOT copy any calibration data to the drive. It copies it to the target buffer but this data is not written to the drive. This is a known bug in JF 1.7 and has been addressed several times. The only way to get your "cali" data is to copy the hex range into your target cfw with a hex editor.
Post by: LittleBH on February 05, 2010, 07:41:00 AM
QUOTE(shtewps @ Feb 5 2010, 02:35 PM)
Firstly.. JF does NOT copy any calibration data to the drive. It copies it to the target buffer but this data is not written to the drive. This is a known bug in JF 1.7 and has been addressed several times. The only way to get your "cali" data is to copy the hex range into your target cfw with a hex editor.
NO! that was a bug which was fixed by current release!
IIRC it was fixed in version 1.70 build (86)
This post has been edited by LittleBH: Feb 5 2010, 03:54 PM
Post by: iateshaggy on February 05, 2010, 08:11:00 AM
to the op, you can use the mra method to dump as well. i use the mra method minus the switch.
This post has been edited by iateshaggy: Feb 5 2010, 04:13 PM
Post by: LittleBH on February 05, 2010, 08:20:00 AM
QUOTE(iateshaggy @ Feb 5 2010, 03:11 PM)
pretty sure they are right on this one. u gotta use hex. its ok though, tj is working on a new jf.
to the op, you can use the mra method to dump as well. i use the mra method minus the switch.
ha ha - fine - dont believe me!
was just trying to spread ACCURATE information.
0.1.70 was released at build (85)
yet 0.1.70 is now build (86),
(IMG:style_emoticons/default/blink.gif)
(IMG:style_emoticons/default/rolleyes.gif) I wonder why?
Post by: iateshaggy on February 05, 2010, 08:54:00 AM
Change Logs
JungleFlasher 0.1.70(86)
=====================================
Foreign Language support
---------------------------------------
German, French, Greek and Portuguese added.
Spanish, Italian and Russian to follow.
Bug fix - Calib data not being flashed
Post by: LittleBH on February 05, 2010, 11:30:00 AM
QUOTE(iateshaggy @ Feb 5 2010, 03:54 PM)
looks like u might be right. some how they snuck 86 in on us w/o anyone noticing or saying anything.
Change Logs
JungleFlasher 0.1.70(86)
=====================================
Foreign Language support
---------------------------------------
German, French, Greek and Portuguese added.
Spanish, Italian and Russian to follow.
Bug fix - Calib data not being flashed
Thanks for having the spuds to at least admit it!
Post by: JaXxYn on February 05, 2010, 12:33:00 PM
Post by: shtewps on February 05, 2010, 12:35:00 PM
QUOTE(LittleBH @ Feb 5 2010, 07:30 PM)
Thanks for having the spuds to at least admit it!
Holy shit.. they did sneak in a quick fix there, unannounced.
I do apologize and stand corrected. Thanks for the info LittleBH!
Post by: LittleBH on February 05, 2010, 12:49:00 PM
QUOTE(shtewps @ Feb 5 2010, 07:35 PM)
Holy shit.. they did sneak in a quick fix there, unannounced.
I do apologize and stand corrected. Thanks for the info LittleBH!
There was nothing sneaky! - OggyUK (jungleflasher) announced it!
then a fixed version was released!
(IMG:style_emoticons/default/biggrin.gif)
Post by: Shutdown[Swe] on February 06, 2010, 08:20:00 PM
Post by: skyworxx2000 on February 06, 2010, 09:37:00 PM
Usually it shouldn't matter if you keep your calib data or not, since it is very unlikely to get banned because of that. But it would definitely do no harm keeping the calib data if you plan to go live.
Some people report problems after they flashed their drive without calib data.
I would recommend keeping the calib data (thus meaning you have to make a full dump of your stock firmware using boxxdr or mra method)