Post by: mrvga on February 04, 2010, 03:26:00 PM
a friend of mine bought an elite version of xbox360 an gave it to me in order to flash it
i tried to but i've accidently pushed liteon erase and i think i've erased the drivers fw or i don't know what happened, after a little time i got a bsod at my pc that was connected the driver and then i couldn't close the xbox tray so i disconected everything and put back together the tray wasn't doing anything and i got 1 red led and e64 error
without the driver the xbox opens to the dashboard
after some research i bought a usb maximus xtractor and a pci via 6421a sata card
the problems are: that liteon drive can't eject the tray(i manually eject it), i can't detect the liteon drive at xtractor reader neither at jungle flasher (dosflash32 something detected but it had an error at Inquiry) if i don't have the sata card drivers i can't detect the drive but if i install them the pc kind of freezes but after some while it responds again but the kind of freezes so it's a dead end,
when i put the spear at the hole at r707 the led doesn't flash(it flashes at other spots like the transistor ahead)
(i haven't solder anything)
any ideas what can i do to detect the driver and retrieve the key?
thank you in advance
This post has been edited by mrvga: Feb 4 2010, 11:30 PM
Post by: syntaxerror329 on February 04, 2010, 03:56:00 PM
so next option is to get the key from the mother board.
So go into system settings > system info and find out what kernal you have.
You should se a number like 2.0.xxxx
if XXXX is equal to 7371 it is probably possible to get the key back. If it is less then that # it is definately possible to get key back. If number is greater then 7371 then there is currently no method of getting the key back.
Post by: iateshaggy on February 04, 2010, 04:08:00 PM
Post by: mrvga on February 04, 2010, 04:12:00 PM
but why is that i can;t even detect the drive? (IMG:style_emoticons/default/sad.gif)
Post by: iateshaggy on February 04, 2010, 04:31:00 PM
This post has been edited by iateshaggy: Feb 5 2010, 12:32 AM
Post by: gregeet on February 04, 2010, 04:34:00 PM
LT comes with stock firmware you can write to the drive, it'll be detected after that, but it'll do you no good without a key.
Post by: mrvga on February 04, 2010, 04:57:00 PM
Post by: gregeet on February 04, 2010, 05:54:00 PM
QUOTE
...when i put the spear at the hole at r707 the led doesn't flash(it flashes at other spots like the transistor ahead)
That's because it's either a v2 8series liteon or a 9 series liteon drive. Only way to dump these is using MRA method. You screwed up quite a bit.
syntaxerror329's advice is your only choice now, you shouldn't have erased the drive.
Post by: mrvga on February 07, 2010, 01:47:00 PM
i guess i give a try to obtain the key from the motherboard, i will let you know for further details(do you have a guide to reccomend me?)
thanks
This post has been edited by mrvga: Feb 7 2010, 09:48 PM
Post by: mrvga on February 07, 2010, 03:12:00 PM
can i still retrieve the key? (IMG:style_emoticons/default/sad.gif)
Post by: FireSokar on February 07, 2010, 03:53:00 PM
Post by: syntaxerror329 on February 07, 2010, 04:36:00 PM
QUOTE(FireSokar @ Feb 7 2010, 05:53 PM) 
you will be unable to get the key if the drive is dead. You can not load the kk disc to get the key without a working drive. consider your loss for what it is and sell the parts.
Where have you been? Jtag hack does not require a working drive. DVD Key and CPU Key from motherboard is now possible.
KK disk is obsolete.
Post by: mrvga on February 03, 2020, 02:54:00 PM
can i retrieve the dvd key with this tutorial?
http://forums.xbox-scene.com/index.php?showtopic=703757
and the thing that says at the point of installing the jtag and protecting the fuses at this image
http://pictures.xbox-scene.com/xbox360/free60/diagram.jpg
should i use didoes like this diagram?
http://pictures.xbox-scene.com/xbox360/fre...s-jasper%29.png
the 1n4148
thanks