xboxscene.org forums
Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: allaidback on December 09, 2009, 02:49:00 PM
-
Guys...flashed tons of liteons before, but for some reason this time something is really screwed. I used iprep to flash the drive, everything went successfully and pulled the key 10 times. I have tried flashing 3 different liteon drives with the same key but none work in the xbox. Says "play dvd" or "open tray". After pulling the dummy.bin file from the backups folder on my flash drive and loading it in JF...JF says the dummy.bin may be corrupted and to fix the bar code stuff or something? I tried correcting this by filling in the info on the pcb board and drive cover, but still nothing. One thing I notice is that the key has a different Hardware version than the cover shows. Key showing "DVD key found @ 0xA030" but top of cover says "A0A1"? Also when I go to repair the dummy.bin file the barcode the last digit is different? Now when I'm filling in the barcode and pcb info to repair the dummy.bin file do I use the original drives info or the one I'm about to flash? I've been using the original. Please help! I flashed some spare liteon drives just to see if it was the laser, but all are doing the same thing.
-
Im assuming the key is the iprep dummy.bin ... it starts with E327743FC....?