xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: apcarr on December 02, 2009, 10:58:00 AM

Title: Liteon 74 Restore To Original
Post by: apcarr on December 02, 2009, 10:58:00 AM
If its got 1.5 on you dont need the probe,just read the drive again and get a new dummy.bin to use.
Title: Liteon 74 Restore To Original
Post by: dougiegillam1357 on December 02, 2009, 11:06:00 AM
liteon/samsung/benq drives cannot be restored to the original state so your wasting your time. The only drive that can be retored to the original firmware is Hitachi.
Title: Liteon 74 Restore To Original
Post by: matycon on December 02, 2009, 11:09:00 AM
Dougie whatre you talking about?

Samsung and Benq drives can be EASILY restored to factory by flashing the original firmware that you extracted back to the drive. no fuss, no muss.


Liteon i see there are some stock firmwares floating around that you can insert your trifecta of dummy files to it and revert it back but the actual extraction is pretty difficult and i cant comment really on this as i havent done it.
Title: Liteon 74 Restore To Original
Post by: jgsieve on December 02, 2009, 11:19:00 AM
I have the original firmware for my liteon (which is now possible BTW) I use jungle flasher as little as possible. can I read the key with the probe???
Title: Liteon 74 Restore To Original
Post by: UnnA^ on December 02, 2009, 08:14:00 PM
I got hold of an original 7xxx fw. I want to know if what im going to do it right to get it back to orig. In JF i open it in the Firmware Tool 32 tab in the Target section. I then click on the Manual Spoofing option and load in my key.bin file and also my inquiry.bin file and hit ok. It appears to display correctly in JF but it doesn't show the firmware type (i assume because it doesn't know what a legit lite-on FW is?) Here is a pic of JF anyway after i have done what i posted....

http://img46.imagesh...i/86438368.jpg/
Title: Liteon 74 Restore To Original
Post by: xbox360sexual on December 02, 2009, 08:50:00 PM
the 74 "majinsoftware" f/w floating around doesnt work, btw. the other two f/w's in the .rar file seem to work fine though.
Title: Liteon 74 Restore To Original
Post by: UnnA^ on December 02, 2009, 09:08:00 PM
Have you got a link to stock 7xxx for me? Or even pm me with it if your not allowed to post it.

Thanks!
Title: Liteon 74 Restore To Original
Post by: majinsoftware on December 02, 2009, 09:16:00 PM
74XXXX firmware works its just a lot harder to stick your key into because there no programe that does it.
First you need to get your encrypted dvdkey.

You do this by injecting it into ixtream. then hex compare the ixtream with out your key and the one with your key.

Then once you have your encrypted key you need to hex edit it into the orignal firmware.

Also make sure your flashing with dosflash. I couldnt get it to work with jungleflasher it would write it then read it back and get errors.

And if you miss a section where your key is ment to be you will get fast dvd eject and insert when you push the dvd eject button.
Title: Liteon 74 Restore To Original
Post by: dougiegillam1357 on December 03, 2009, 12:37:00 AM
One  two many whiskies i think, what i meant to say was yes providing you have your original virgin firmware file for your Samsung or Benq you can restore to stock. The liteon cannot as it doesnt create an original backup when dumping. The hitachi original firmware is available for all models. I have never seen any downloadable or trusted original firmwares for Samsung/Benq or liteon. Also using your 360 for powering the drive for flashing can be detected by live and flagged, there have been numerous posts on this.
Title: Liteon 74 Restore To Original
Post by: RMF on December 03, 2009, 12:46:00 AM
QUOTE(dougiegillam1357 @ Dec 3 2009, 08:37 AM) View Post

One  two many whiskies i think, what i meant to say was yes providing you have your original virgin firmware file for your Samsung or Benq you can restore to stock. The liteon cannot as it doesnt create an original backup when dumping. The hitachi original firmware is available for all models. I have never seen any downloadable or trusted original firmwares for Samsung/Benq or liteon. Also using your 360 for powering the drive for flashing can be detected by live and flagged, there have been numerous posts on this.


The lite-on can be returned to stock. There have been numerous posts on this  tongue.gif
Title: Liteon 74 Restore To Original
Post by: UnnA^ on December 03, 2009, 01:06:00 AM
Doug, please stop posting information as it is repeatedly wrong. RMF, if you could please direct me on how to do this i would be most pleased. I have my dump files from the original probe, i think i have obtained a blank 7xxx fw, what steps must i take to get this drive back to stock?

Thanks.
Title: Liteon 74 Restore To Original
Post by: apcarr on December 03, 2009, 02:02:00 AM
Think dougie's been living under a rock  for the past couple of days...dougie All LiteOns can now be dumped therefore we have the OFW and can restore them to stock.
Title: Liteon 74 Restore To Original
Post by: xbox360sexual on December 03, 2009, 04:08:00 AM
QUOTE(majinsoftware @ Dec 3 2009, 04:16 AM) View Post

74XXXX firmware works its just a lot harder to stick your key into because there no programe that does it.
First you need to get your encrypted dvdkey.




Odd, I opened 74 f/w with JF target, spoofed the key and wrote to drive. It didn't work. I then done the same method with 83 f/w and it worked fine.

Why is 74 different? I suspect the f/w file is corrupt tbh.
Title: Liteon 74 Restore To Original
Post by: UnnA^ on December 03, 2009, 06:02:00 AM
I just flashed my 7xxx back to orig and it works perfect. Connected to Live perfectly smile.gif I'm off to work now but will check back in the morning to see if you got hold of the fw.
Title: Liteon 74 Restore To Original
Post by: foolkiller on December 03, 2009, 06:06:00 AM
QUOTE(UnnA^ @ Dec 3 2009, 08:02 AM) View Post

I just flashed my 7xxx back to orig and it works perfect. Connected to Live perfectly smile.gif I'm off to work now but will check back in the morning to see if you got hold of the fw.


Which F/W did you use, the on floting around or did you dump it yourself?
Title: Liteon 74 Restore To Original
Post by: hugepants on December 03, 2009, 06:16:00 AM
I hex compared with various iXtreme firmware and found that majinsoftware's stock 74 bin does not match any blocks of data. His 83v1 does match large chunks of the equivalent iXtreme so this appears to be OK.

zefyx's stock 74 bin does match large chunks of the equivalent iXtreme so this appears to be OK.

As more original rips appear we will be able to compare against those and determine their accuracy with more certainty.

majinsoftware
Liteon.Orignal.Firmwares.rar 405A827D67B0AC804D7173455EED1048
Liteon.74.bin 2FB48F5EFAB3886A6CFD3C1FB6AD179E (looks bad)
Liteon.83v1.bin 32B2A89B6D796D6E20D47FFA2A8518DD (looks ok)
Liteon.93.bin 38B30FED81745989001E11D6950A4F6B (can't compare to anything yet)

zefyx/Ghaladan
ltorigspoof.zip 29769BB14348D486A9FC97D37AD7B1C4
Lite_74850.bin FE2382061DA74206A276A912EC7436A9 (looks ok)

Please DO NOT post or request files here as the thread will be deleted and you will be punished by the mods!

When referring to firmware please state the hash of the file you are using.
Title: Liteon 74 Restore To Original
Post by: foolkiller on December 03, 2009, 07:10:00 AM
QUOTE(hugepants @ Dec 3 2009, 08:16 AM) View Post

I hex compared with various iXtreme firmware and found that majinsoftware's stock 74 bin does not match any blocks of data. His 83v1 and 93 ones do match large chunks of the equivalent iXtreme so these appear to be OK.

zefyx's stock 74 bin does match large chunks of the equivalent iXtreme so this appears to be OK.

As more original rips appear we will be able to compare against those and determine their accuracy with more certainty.

majinsoftware
Liteon.Orignal.Firmwares.rar 405A827D67B0AC804D7173455EED1048
Liteon.74.bin 2FB48F5EFAB3886A6CFD3C1FB6AD179E (looks bad)
Liteon.83v1.bin 32B2A89B6D796D6E20D47FFA2A8518DD (looks ok)
Liteon.93.bin 38B30FED81745989001E11D6950A4F6B (looks ok)

zefyx/Ghaladan
ltorigspoof.zip 29769BB14348D486A9FC97D37AD7B1C4
Lite_74850.bin FE2382061DA74206A276A912EC7436A9 (looks ok)

Please DO NOT post or request files here as the thread will be deleted and you will be punished by the mods!

When referring to firmware please state the hash of the file you are using.


You sir are a life saver!!! I just spent the last 4 hours trying to get this 74XXXX to flash without any luck. And the hole time it was a BAD DUMP grr.gif . I just flashed "Lite_74850.bin FE2382061DA74206A276A912EC7436A9" and it worked like a charm. Thanks a lot you saved my sanity. Heads up everybody "majinsoftware" 74xxxx version is definitely a BAD DUMP I can conform this 100%. And "ltorigspoof.zip 29769BB14348D486A9FC97D37AD7B1C4" is 100% GOOD.
Title: Liteon 74 Restore To Original
Post by: majinsoftware on December 03, 2009, 07:20:00 AM
2FB48F5EFAB3886A6CFD3C1FB6AD179E
is bad, Doesnt match the one that I initially have, So it looks like it got stuffed being rared.

Ill re-pack it and check it when I get 83v2.

32B2A89B6D796D6E20D47FFA2A8518DD and 38B30FED81745989001E11D6950A4F6B  match correctly tho.
Title: Liteon 74 Restore To Original
Post by: xbox360sexual on December 03, 2009, 10:02:00 AM
Excellent, I wasn't going mad then smile.gif

I can confirm that 83 f/w works perfect, 74 however is fudged.
Title: Liteon 74 Restore To Original
Post by: AbsoluteZeroInc on December 05, 2009, 07:29:00 AM
I think I found the right firmware but neither of them says it's for 74. any suggestions?

Thanks
Title: Liteon 74 Restore To Original
Post by: AbsoluteZeroInc on December 05, 2009, 09:25:00 AM
Got it working perfectly.

Thank YOU