xboxscene.org forums
Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: eZtaR on November 18, 2009, 10:54:00 AM
-
I've tried about a thousand times with Jungleflasher, but i keep getting the 'Invalid status 0x50' error while trying to upgrade my ms28 with iXtreme 1.4 to 1.61 and I keep getting disc read errors when trying to boot from a iPrep'd USB (i suspect the ancient laptop I'm using is the problem).
I've tried with both the 0800.iso and the activate.iso that comes with Jungleflasher but to no avail.
So my questions are as follows:
1) What is the correct order to boot things (keeping in mind that I'm running with a PCMCIA card with the correct VIA chipset)
2) Do the aforementioned ISOs need to be burnt in a specific way on a specific medium or is that only if I'm flashing from a slot on the motherboard.
3) Any tips/tutorials/links you'd like to share? (IMG:style_emoticons/default/wink.gif)
/eZtaR
-
How are you powering the drive, Xbox or connectivity kit?
-
I think thats a chipset problem. I had that error with a PCI SATA card that didn't work well, whenever i replaced it with PCI VIA it worked. Hope that helps.
-
Nevermind, i finally managed to get it into get it into vendor mode by doing the power off for >1 sec trick (IMG:style_emoticons/default/smile.gif)
This post has been edited by eZtaR: Nov 19 2009, 06:45 AM