Post by: Xand49 on January 12, 2013, 03:19:00 PM
Post by: weakgg on January 13, 2013, 02:39:00 AM
Post by: Xand49 on January 13, 2013, 04:03:00 AM
I've attempted to run ndure on.the new drive for some reason when I am in the ndure menu for that drive I'm unable to execute any files.
Have also attempted frostys and hexen discs which told me disc not recognised
Post by: weakgg on January 13, 2013, 09:50:00 AM
Or did you mean you can get the exploit to start up but it can't install?
Post by: Xand49 on January 13, 2013, 10:33:00 AM
QUOTE(weakgg @ Jan 13 2013, 06:50 PM) 
When you say you're in the ndure menu you can't run any files, are you in a file manager? I thought you said all you can get is the regular dashboard? Or are you just seeing the files in the game saves section of the stock dashboard?
Or did you mean you can get the exploit to start up but it can't install?
If I run xboxhdm2.2 I can get xbrowser to work in the ndure menu, when I get into the ASCII file manager I can move between folders but cannot run the ndure script, hitting enter does nothing
When I boot up with the drive in the Xbox all I get is the ms dash
Post by: Xand49 on January 14, 2013, 02:30:00 PM
Post by: weakgg on January 14, 2013, 09:26:00 PM
If all else fails, since you can get the MS dash to load up like normal, you could always buy a xbox-to-female usb adapter for cheap on ebay and try one of the other exploits with Splinter Cell, 007, or Mech Assault.
Post by: Xand49 on January 15, 2013, 12:49:00 AM
I presumes there would be issues using two different soft mods in the same drive which is why I've not tries the SC exploit?
Post by: weakgg on January 15, 2013, 06:46:00 PM
Also when you get it sorted out, if you have an Xbox that can be TSOP flashed - do it. I had 3 softmodded boxes for the longest time and then I finally decided to flash one of them. Best thing I ever did, you can just plug in a new hard drive and rebuild it with Auto Installer Deluxe DVD. No hot swapping or getting a drive that can be locked or anything, it just works. I've since flashed all of mine that support it. If you're worried about soldering, just buy some conductive paint online and one of the really small paint brushes for model building. You can basically put two paint blots on the board and that's all you have to do.
Post by: Xand49 on January 15, 2013, 07:04:00 PM
Not looked into flashing, think my box is a 1.2
Post by: Xand49 on January 18, 2013, 03:51:00 AM
for some reason while in slax my cpu temp seems to just escalate upto 100 and then takes a few hours to cool down so i have limited time to test versions, i've been using the misses' pc sporadically but don't have a lot of access time with that.
could anyone please advise on what could be going on?
Post by: shambles1980 on January 18, 2013, 05:59:00 AM
when thats booted copy the contents of
d:\stock files\C
to C:
"you may want to delete everything from C 1st.. "
do not restart your xbox during this process
when you have the new C files on c go to one click softmod install and i usually reccomend krazies ndure 1.1.1 (sc) exploit
follow all on screen instructions untill its done..
One way to make the hexen disk boot when you are not softmodded is to start a game save exploit and then chose "boot recovery dvd" from the options available.
This is an option available with ndure 1.1.1 SC exploit,
But it may only be an option with the game saves it creats after installing the softmod..
these game saves will be available on the hexen dvd too..
Id try to boot hexen without any special tricks 1st..
but if you cant then id use a ganme save exploit to boot the recovery disk,
the blak screen issue could be due to a soft mod on a hard mod.. "but then hexen should boot, although it will take up to 2 mins to load"
it could also be a slow/dying hard disk that takes a while to boot properly.
Also EEProm conflicts can cause it. so yo may want to check that there are no copys of eeprom files on the hard disk.
Post by: shambles1980 on January 18, 2013, 07:38:00 AM
unlock it.
format it using windows.
download "Autobuilder"
(its just a pre made xboxhdm in many ways)
put your eeprom file in the correct folder.
and then tell autobuilder what type of install you want to do.
then it will make your iso for you..
and the rest is the same as you have been doing..
This should do 2 things..
1. make sure you dont have any rogue eeprom files on the hard disk causing black screen.
2. guarantee that you have softmod files on there (they will now be sid based though. so you may want to update with hexen after.
that should eliminate most of the variables..
Post by: Xand49 on January 18, 2013, 09:07:00 AM
Post by: shambles1980 on January 18, 2013, 09:47:00 AM
you should start auto builder and tell it what sort of install you want and it will then go ahead and populate the folders for you. Not sure if it will make the iso automatically (probably will) But you can then open the iso using magic iso or alcohol or demon tools and so on..
this will let you see the folders on the iso..
you can then take The C and E folders from that iso and use that on your xboxhdm 2.2
the importaint thing is to start with a fromated hard disk "i think"
as this will make sure there is no cache issues and no rogue eeprom files..
if you decide to just use the stock C and E drives from hexen, then its the same process.
but you wont be softmodded when your finished it will be a stock hard drive again but it will have save game exploits on there, although they will be recovery exploits.. They can still be used to modify the console later usoing splinter cell combined with a recovery dvd like hexen..
Post by: shambles1980 on January 19, 2013, 05:10:00 AM
21 is just a generic error.
try rebooting if that wont work jam in a recovery disk like hexen "heimdalls xbox engineering disk"
then tell that to soft mod.. (if it boots)
and your sure your soft modded right? because if your hard modded you will be needing to use a diferent kind of exploit.
Post by: Xand49 on January 19, 2013, 07:25:00 AM
anyways, gonna have a play and try not to brek anything
Post by: Xand49 on January 19, 2013, 09:11:00 AM
Also, on a slightly unrelated note, it is recognizing my G drive as 0gb (320gb drive) and my F as 120. I've tried using the hexen disc to reformat but as my luck goes the AYBX password doesn't actually work for me!
any hints?
Post by: Joes2Silly on January 19, 2013, 12:11:00 PM
Post by: shambles1980 on January 19, 2013, 07:04:00 PM
password is Xbox (case sensitive)
you should usually use xbpartitioner in hexen rather than just format though.
but if the G drive is less than 250gb format should work fine for you. and wont mess up F.
you can resoftmod with hexen now its able to boot it, may fix your issues..
Also tell hexen to clear cache, and delete un needed eeprom files.