Post by: Xbox-Scene on April 08, 2011, 04:44:00 PM
| cOz released a new version of Dash Launch build for JTAG 360s. What's new/fixed: * fixed noupdater option, readme is accurate with regards to updates now (sorry) * fixed dvdexitdash option, no longer conflicts with using miniblade to exit NXE should only affect DVD launched from NXE (note this affects DVD games too) * fixed a glitch with unhandled exception logging when occurs in kernel * revert to original fileExist() method Official Site: n/a, by cOz Download: n/a (built with XDK) Full Readme/NFO: xbins.org |
Post by: Aldanga on April 08, 2011, 05:49:00 PM
Post by: 40_ounce on April 08, 2011, 07:22:00 PM
Post by: Aldanga on April 08, 2011, 07:25:00 PM
Post by: tk_saturn on April 08, 2011, 07:34:00 PM
I've encountered a Fatal Exception with Mass Effect 2 when using v1.1 of the Disc Swapper plugin, and it generated the crashlog which is posted in the DL v2.20 thread. I'm wondering could these debugging features help homebrew coders enough to spur additional development?
This post has been edited by tk_saturn: Apr 9 2011, 02:35 AM
Post by: 40_ounce on April 08, 2011, 07:38:00 PM
QUOTE(Aldanga @ Apr 8 2011, 06:25 PM) 
/Xbox 360/development/system apps/
Kool thanks..... I can never find it...lol.....
Post by: xboxhaxorz on April 08, 2011, 09:58:00 PM
QUOTE(40_ounce @ Apr 8 2011, 09:38 PM)
Kool thanks..... I can never find it...lol.....
not many people do, they should change the location or something
Post by: Dwack on April 08, 2011, 10:55:00 PM
Post by: DMAddict on April 09, 2011, 08:41:00 AM
Post by: Keksz on April 09, 2011, 10:21:00 AM
I have never saw an auto update for DL!?
Post by: DMAddict on April 09, 2011, 11:30:00 AM
QUOTE(Keksz @ Apr 9 2011, 09:21 AM)
Auto updates?
I have never saw an auto update for DL!?
LOL Oh yeah, I was thinking of FSD.
How stupid of me.
Post by: seaweavil on April 10, 2011, 12:34:00 PM
Post by: budtoka420 on April 10, 2011, 01:52:00 PM
QUOTE(seaweavil @ Apr 10 2011, 07:34 PM)
I updated my JTAG with this yesterday. I have used every release up until now with no problems. I am running 12611. My problem is now artwork will not download in FSD (latest build). Any suggestions? Otherwise I guess I'm going back to the last revision of this.
thats because you set dashlaunch to aggressively block microsoft and it wont download any artwork I had the same problem till I changed the setting
Post by: seaweavil on April 10, 2011, 02:38:00 PM
This post has been edited by seaweavil: Apr 10 2011, 09:42 PM
Post by: budtoka420 on April 10, 2011, 02:57:00 PM
QUOTE(seaweavil @ Apr 10 2011, 09:38 PM)
Ok I didn't change any settings at all though. All I did was launch the xex from the installer folder and installed it. How do I fix this? Reflash old nand and start over or can it be done through FTP? I always look at the read me and it said that I had to change a setting in the .ini to block everything. Like I said I never changed a thing so...
run the 2.21 installer on your jtag and when it asks you to change settings say yes and say no when it asks you to block microsoft dns aggressively
Post by: seaweavil on February 03, 2020, 02:02:00 PM
QUOTE(budtoka420 @ Apr 10 2011, 03:57 PM) 
run the 2.21 installer on your jtag and when it asks you to change settings say yes and say no when it asks you to block microsoft dns aggressively
Hmm I don't get that option when I run the installer? It just gives me the option to flash the freeboot updates the first time and then the second time it tells me I already have the updates.
Is it possible that because I am still on 12611 dash that I don't get that option menu? Do I have to have 12625?
This post has been edited by seaweavil: Yesterday, 10:09 PM
Post by: Aldanga on February 03, 2020, 02:18:00 PM
Post by: seaweavil on February 03, 2020, 02:22:00 PM
QUOTE(Aldanga @ Apr 10 2011, 04:18 PM)
You need to have launch.ini on one of your storage devices. If it doesn't exist it won't ask you to change settings.
Ok thanks. I will just revert to my old nand and an earlier version then. Last time I messed around with the launch.ini I had all kinds of problems.
Actually I went ahead and tried it. Worked out pretty well. I just with there was an option to have that installed without a launch.ini file. Just makes me nervous I guess after the bad experience I had previously with it. Thanks for all the help guys!
This post has been edited by seaweavil: Yesterday, 10:53 PM
Post by: schubi on April 11, 2011, 09:13:00 AM
Post by: Aldanga on April 11, 2011, 12:12:00 PM
Post by: Aldanga on April 12, 2011, 05:39:00 PM
Post by: ade2 on April 13, 2011, 06:27:00 AM
QUOTE(Velocimodz @ Apr 13 2011, 07:05 AM)
I'm having issues with this new version, everytime I do the update, it appears to write all 3 files to flash, but it never loads the correct options. I have this in my .ini on the root of USB.
So it should be loading from Hdd:\FSD 2.0\default.xex by default, I have checked the shortcuts a million times and it is definitely correct and the same as I always use. It only boots to NXE. Even if I have a USB hdd with FSD 2.0 on it and hold X during startup, it still only boots NXE. I can run the shortcut manually thru xex menu so that is fine also.
Tried first on a Jasper and it corrupting the launch.ini file, after each dashlaunch update the .ini would be an empty file, all settings disappeared.
Can anyone think of what could be wrong here? Its got me stumped.
I would try without a space in the folder name, if you haven't tried that...
Post by: Velocimodz on April 13, 2011, 06:32:00 AM
QUOTE(ade2 @ Apr 13 2011, 01:27 PM)
I would try without a space in the folder name, if you haven't tried that...
Yeah I have tried that and it worked. Strange that it never happened on other machines before tho.
Thanks buddy.
Can you confirm it allows games that require a higher dash 12655 to play on a 12611 freeboot? I haven't got any new games to try it with, but I presume thats what the hashcheck removing is about?
Post by: Sturmie on April 13, 2011, 07:21:00 AM
Thanks...Sturmie
Post by: korruptcow on April 13, 2011, 11:29:00 PM
Post by: Aldanga on April 13, 2011, 11:34:00 PM
Post by: drvsbsm on April 14, 2011, 08:57:00 PM
Post by: cory1492 on April 15, 2011, 05:28:00 PM
QUOTE(drvsbsm @ Apr 14 2011, 07:57 PM)
When I ran dashlaunch 2.0 last week It upgraded me to 12625 now, For some reason this took me back to 12611 can some one explain so I can get back to 12625? Some newer games require 12625 correct?
Dash launch doesn't upgrade or downgrade your firmware... it updates itself and the patch set based on what firmware you're console is on. If it really went from 12625 to 12611, I'd be looking under the bed and such for the "evil reflashing elves" that used to stick to just stealing socks...
QUOTE(toybox @ Apr 15 2011, 09:08 AM)
Without Dash Launch it works just fine, but after installing i receive " fatal crash intercepted " error
until my console blacks out. It still reacts to the controller but repeats " fatal crash intercepted ".
If you could set the dumpfile option in the ini to something like
dumpfile = Hdd:\crashlog.txt
it will dump the crash causes to that file in the root of the partition with /content folder on it, which could (maybe) help to find the issue. After doing that, you can also try
exchandler = false
And see if it improves the behaviour. Keep in mind, the ini file has to be somewhere it can be found at console boot up, and if a USB HDD is causing issues that won't be the place to put it.
Post by: toybox on April 15, 2011, 08:21:00 PM
CODE
------------------------------------------------------------------------
TIME: 12:00:35 GMT Tue, Nov 22, 2005
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
FullName : \Device\Flash\xam.xex
BaseName : xam.xex
PEName : xamc.dll
ImageBase : 817E0000
SizeOfFullImage: 00550000
EntryPoint : 81872100
------------------------------------------------------------------------
EADDR: 0x8193612C
ECODE: 0xC0000005
EFLAG: 0 (cont)
NPARM: 2
PARAM 00: 0x00000001
PARAM 01: 0x00000000
CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
MSR: 0x00009030 IAR: 0x8193612C
LR : 0x8193611C CTR: 0x0000000000000000
------------------------------------------------------------------------
Integer Registers:
CR : 0x24000088 XER: 0x20000000
r0 : 0x0000000000000003 r1 : 0x000000007A07EEE0 r2 : 0x0000000000000000
r3 : 0x0000000000000000 r4 : 0x0000000081C1E19A r5 : 0x0000000000000008
r6 : 0x0000000000000065 r7 : 0x0000000000000008 r8 : 0x0000000081C1E193
r9 : 0x0000000000000000 r10: 0x0000000081C23518 r11: 0xFFFFFFFFFFFFFFFF
r12: 0x000000008193611C r13: 0x0000000080183000 r14: 0x0000000000000000
r15: 0x0000000000000000 r16: 0x0000000000000000 r17: 0x0000000000000000
r18: 0x0000000000000000 r19: 0x0000000000000000 r20: 0x0000000080065C10
r21: 0x0000000081C1E184 r22: 0x000000000000000D r23: 0x0000000000000000
r24: 0x0000000081C23178 r25: 0x0000000000000006 r26: 0x0000000000000008
r27: 0x0000000081C1E193 r28: 0x0000000000000000 r29: 0x0000000081C231F0
r30: 0x000000000000000A r31: 0x0000000081C1E19D
------------------------------------------------------------------------
Call Stack:
0x8193612C (EADDR)
0x8193611C (LR)
0x819362E0
0x81BC46E0
0x81BC4CAC
0x81BC4F74
0x81B86C24
0x81A3BC14
0x81A25E28
0x818D4BB0
0x818D5470
0x8188FE74
0x818905A8
0x81890828
0x80065C3C
0x8007548C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------
This keeps repeating. One Boot less than a minute > 2,5MB of TXT.
It seems i am not alone, i found a post at pastebin from a guest > http://pastebin.com/kGACp24G.
Post by: toybox on April 15, 2011, 10:46:00 PM
Removed > Problem solved
Post by: cory1492 on April 16, 2011, 07:58:00 PM
Just a quick note, problem with Yars' has been found, for now if you MUST use it disable liveblock... it should be fixed in a release in the next day or two. From a beta this morning:
CODE
- resolving 'localhost' when the router forwards it to the internet or there is
no network at all... bad idea game devs... fixed (Yars', maybe others)
no network at all... bad idea game devs... fixed (Yars', maybe others)
Post by: kewlmonk on April 19, 2011, 02:51:00 PM
Also, I put the FSD2 folder on the USB HDD and configured the launch.ini file to point to usb0:\FSD2\default.exe for the X button hold boot, but when I hold X during boot I am brought directly into XEXMenu...strange.
Slight newbie at this stuff, so I apologize ahead of time for my lack of knowledge regarding this..and I thank you for any help you can provide.
Cheers.
Post by: uaegangster111 on April 30, 2011, 06:49:00 AM
the ping patch does not work for 12625 dash but it works in 12611 dash
i hope that it can be fixed
Post by: crimpshrine on May 23, 2011, 09:11:00 PM
http://digiex.net/do....html#post44293
The game is Teenage Mutant Ninja Turtles - Turtles in Time.
Black screen on load, no 2.21 installed, loads fine.
Anyone run into any others that do not work with 2.21?
Post by: tornadog on May 25, 2011, 08:49:00 AM
Post by: digipimp75 on May 26, 2011, 08:16:00 AM
QUOTE(kewlmonk @ Apr 19 2011, 04:51 PM)
the problem I'm having is that only games i copy from the 360 itself are showing up - anything put into the /games folder via my PC don't. Is there something special I need to do via my PC before I copy them to the USB HDD?
Also, I put the FSD2 folder on the USB HDD and configured the launch.ini file to point to usb0:\FSD2\default.exe for the X button hold boot, but when I hold X during boot I am brought directly into XEXMenu...strange.
Slight newbie at this stuff, so I apologize ahead of time for my lack of knowledge regarding this..and I thank you for any help you can provide.
Cheers.
Is your usb hdd formatted to FAT32? The xbox won't recognize NTFS.
Post by: mickcris on June 06, 2011, 08:55:00 AM
QUOTE(mickcris @ Jun 2 2011, 07:44 PM)
Does anyone know if dash launch now detects the zephyr 4580 correctly? I used to just copy the falcon patches and rename them to zephyr. now the patches are inside the default.xex file so that is no longer an option.
I was able to extract the files from the xex file with xextool, but i do not know how to recompile it back to xex file.
I am trying to help a friend update this box that used to be mine and am trying to aviod having to reflash it if the wrong patches are applied.
thanks.
I was able to extract the files from the xex file with xextool, but i do not know how to recompile it back to xex file.
I am trying to help a friend update this box that used to be mine and am trying to aviod having to reflash it if the wrong patches are applied.
thanks.
Nevermind, it does now correctly apply the falcon patches! thanks.
Post by: xboxhaxorz on June 06, 2011, 03:17:00 PM
Post by: rami1 on June 11, 2011, 05:20:00 AM
Post by: rami1 on June 16, 2011, 10:27:00 AM
Using FreeBott 12611.
Did anyone tested Yars Revenge?