xboxscene.org forums
Xbox360 Forums => Xbox360 Software Forums => XeXDK development => Topic started by: BigSteel on February 10, 2010, 07:45:00 PM
-
My 360 is jtag'd and I am attempting to use a 120GB hard drive on it. The 20GB hard drive I was using worked fine. Anyway, the issue is the when I hook up the 120GB to my PC via the xecuter kit and use Xplorer360, there is nothing showing in partition3 of the hard drive. However, when I hook up the drive to the xbox, there is a bunch of the demo360 XBLA games on the drive. Why can't I see them in Xplorer360? Also, when I attempt to put XexMenuX on the hard drive in partition3, it does not show up in the NXE menu at all? The XBLA demos do show up when I connect to hard drive to th xbox and explore the hard drive via a CD of XeXmenu. Any ideas???
-
sounds like you're using the wrong version of xplorer360.
There are umpteen versions about patched for different size hdds. Not sure if allowed to give links.
the one I had that works with 120gb is Xplorer360_extreme2 and sure there is another 120gb compatable patched one too.
I made similar mistake after putting a 320gb drive in......BUT the problem I had there....after copying files within xplorer360....was that when adding files - it screwed up the partition - actually reducing the hdd space reported as available back to a 120gb equivalent (from having 320gb space remember). So in the end had to format the partition 3 again.
Soooo....best/recommended to reformat that partition 3 in the 360. And then use the correct version of xplorer 360 that can actually see data in the 3rd partition.
Also take a look for FatXplorer and XPort - they're also other alternatives for reading the hdd on a pc.
-
Xplorer360 Extreme2 en.exe for 20-120GB
Xplorer360_09b6_250gb.exe for 250GB
This post has been edited by rami1: Feb 12 2010, 05:10 PM