Post by: Xbox-Scene on January 26, 2010, 01:00:00 PM
| Team XeDev released a new version of XeXmenu, a homebrew Xbox360 dashboard: What's news/fixed : * Added HFS+ drive support * Added ip adress information to the configuration menu * Added skin loading verify routine to output errors on the screen while starting XeXmenu * Added some user skins * Improved ftp upload speed * Loads nxebg.dds and icon.dds even if nxeart isn't present * Some other bugs fixed Official Site: http://xedev.xbins.org Download: n/a (built with XDK) News-Source: x360.gx-mod.com |
Post by: jimmy2x2x on January 26, 2010, 01:03:00 PM
Thanks
Post by: rulevoid on January 26, 2010, 01:05:00 PM
Post by: Velocimodz on January 26, 2010, 01:14:00 PM
Still waiting for it to be uploaded to xbins tho so I can try it out.
Right on!
Post by: zephyr420 on January 26, 2010, 01:18:00 PM
QUOTE(Velocimodz @ Jan 26 2010, 09:14 PM) 
Sweet, upload was pretty slack on 1.0, but still this is one of the most useful homebrews you can get on 360 so far and I use it alot, thanks XeDev team.
Still waiting for it to be uploaded to xbins tho so I can try it out.
Right on!
Its available @ gxmod
Post by: Velocimodz on January 26, 2010, 01:45:00 PM
Funny that they havent updated their Team XeDev website status, it still says XEXmenu is at 1.0
Guess its only just been released though and the other side of the world are sleeping
Post by: DarkProphecy on January 26, 2010, 02:02:00 PM
Post by: Lush on January 26, 2010, 02:13:00 PM
Post by: ][UNREAL][ on January 26, 2010, 02:26:00 PM
Only if I put a USB (anything, pendrive, hdd usb, etc) the xexmenu don't freezes on start.
Post by: ddd1 on January 26, 2010, 02:31:00 PM
Post by: SniperKilla on January 26, 2010, 02:55:00 PM
41.6C GPU in XeXMenu with 75% fans on my Falcon... used to be 53C
Post by: mjrweedo on January 26, 2010, 02:55:00 PM
NTFS support next?
Post by: Shippy on January 26, 2010, 03:01:00 PM
QUOTE
[UNREAL][' date='Jan 26 2010, 09:26 PM' post='4625953']
The freezes continues on start...
Only if I put a USB (anything, pendrive, hdd usb, etc) the xexmenu don't freezes on start.
The freezes continues on start...
Only if I put a USB (anything, pendrive, hdd usb, etc) the xexmenu don't freezes on start.
Do you have your games installed on hdd1:/games?
Using XeXMenu v1.0, the program would freeze if I had my games there (I have no USB devices connected). Since I only had 1 game installed there (and 2 via NXE) i went ahead and reformatted the drive via NXE, reinstalled XeXMenu, and then made a new directory called hdd1:/tmp to store my games. I have to manually launch each game.
Post by: ddxcb on January 26, 2010, 03:03:00 PM
QUOTE(mjrweedo @ Jan 26 2010, 02:55 PM)
Nice indeed!!
NTFS support next?
Agreed my external HDD is in that format
Post by: BlueSlingShot on January 26, 2010, 03:17:00 PM
Nice about fixing the heavy load on the cpu, i was about to pick up some whisper fans from divineo but if this is fixed then even better.
This post has been edited by BlueSlingShot: Jan 26 2010, 11:18 PM
Post by: syntaxerror329 on January 26, 2010, 03:23:00 PM
I tried running v1.0 and FTP'ing but it wont let me delete the old XeXMenu while i am using it.
I also tried using IngeniouX but the FTP doesn't seem to work for me with that program.
When i put XeXMenu version 1 on i had to take the hard drive apart and connect it directly to my PC. I don't really want to have to do that again if there is a better way.
Thanks
Post by: garyopa on January 26, 2010, 03:24:00 PM
QUOTE(Shippy @ Jan 26 2010, 05:01 PM)
Do you have your games installed on hdd1:/games?
Using XeXMenu v1.0, the program would freeze if I had my games there (I have no USB devices connected). Since I only had 1 game installed there (and 2 via NXE) i went ahead and reformatted the drive via NXE, reinstalled XeXMenu, and then made a new directory called hdd1:/tmp to store my games. I have to manually launch each game.
Yep, I had this problem with v1.0 also.
If I installed any game on to the 360's own HDD, I would end up with a dead box, freeze upon relaunching the XeXMenu, if the game was inside the Games directory.
I really hope they fixed this bug. -- I have to test it out later and see!
Post by: Sunblood on January 26, 2010, 03:28:00 PM
QUOTE(syntaxerror329 @ Jan 26 2010, 04:23 PM) 
What is the best way to update from v1.0
I tried running v1.0 and FTP'ing but it wont let me delete the old XeXMenu while i am using it.
I also tried using IngeniouX but the FTP doesn't seem to work for me with that program.
When i put XeXMenu version 1 on i had to take the hard drive apart and connect it directly to my PC. I don't really want to have to do that again if there is a better way.
Thanks
If you have a memory card you can move the old XeXMenu on to there via the 360 dash, run it, and move the new XeXMenu to the HDD.
If not, burn XeXMenu to CD and use that to move/delete the appropriate versions.
Post by: garyopa on January 26, 2010, 03:29:00 PM
QUOTE(syntaxerror329 @ Jan 26 2010, 05:23 PM)
What is the best way to update from v1.0
I tried running v1.0 and FTP'ing but it wont let me delete the old XeXMenu while i am using it.
I also tried using IngeniouX but the FTP doesn't seem to work for me with that program.
When i put XeXMenu version 1 on i had to take the hard drive apart and connect it directly to my PC. I don't really want to have to do that again if there is a better way.
Thanks
The way I get it onto the system the first time, is take any version and burn it onto a CDR (I use a CDRW) that way, I can then launch it from the 360 dashboard, and then just use itself to copy it over to the HDD works great. -- And if I don't want to reburn the CDR, I just put the new version on a usb stick, launch the old one from the CDR, and then browse to the USB stick, and copy it over the HDD.
Or if you got one working already on your HDD and you want to update it, launch the old one, then use it to launch the new one on the USB stick, then use that one to copy it over the old existing one on the HDD.
Post by: Shippy on January 26, 2010, 03:34:00 PM
QUOTE(Sunblood @ Jan 26 2010, 10:28 PM)
If you have a memory card you can move the old XeXMenu on to there via the 360 dash, run it, and move the new XeXMenu to the HDD.
If not, burn XeXMenu to CD and use that to move/delete the appropriate versions.
Or how about this: put v1.1 on a usb stick/drive (both versions). Load v1.0 through the NXE. launch v1.1 on the usb stick (XEX). Delete the live v1.0 from the xbox. copy the new v1.1 live version to the xbox. Reboot and you shoudl be good to go!
Post by: SniperKilla on January 26, 2010, 03:36:00 PM
Good stuff, thanks for the update!
Post by: Biaz on January 26, 2010, 03:43:00 PM
sweet! I was only able to get 5 MB/sec with 1.0!Thank a lot
Post by: effbee05 on January 26, 2010, 03:46:00 PM
Post by: jihaut on January 26, 2010, 03:47:00 PM
Will be back soon with positive reviews no doubt
Post by: Biaz on January 26, 2010, 03:54:00 PM
Post by: intention on January 26, 2010, 04:08:00 PM
QUOTE(garyopa @ Jan 26 2010, 02:24 PM)
Yep, I had this problem with v1.0 also.
If I installed any game on to the 360's own HDD, I would end up with a dead box, freeze upon relaunching the XeXMenu, if the game was inside the Games directory.
I really hope they fixed this bug. -- I have to test it out later and see!
I had this issue too. Had to revert back to Xexloader in the mean time.
Let us know if this is fixed!
Post by: Sunblood on January 26, 2010, 04:11:00 PM
The old one shows up fine, but when I delete it and move the new version onto the HDD it won't appear.
It works if I run it manually from USB or burning to disc.
Post by: halikus on January 26, 2010, 04:11:00 PM
I guess this is our new Evox and is right on time and im sooooo used to it. I expected nothing less after the exploit and wow the homebrews crooking now.
Im sure theres some people drinking serious coffee and doing serious blow trying to get video/media support rocking. My only advice is now is a good time to watch a season of 24 in the background and i hope you don't have wives or jobs.
Post by: effbee05 on January 26, 2010, 04:16:00 PM
Post by: halikus on January 26, 2010, 04:20:00 PM
Besides a reboot i'm not sure if i didn't already help.
effbee05... thats still dang fast. Way better than Xbox1. Now to break the NTFS limit for mkv's. How about a partition 4?
Post by: solider32 on January 26, 2010, 04:30:00 PM
QUOTE(Sunblood @ Jan 27 2010, 12:11 AM)
For some reason I can't get this to show up in the Games menu. I haven't had a problem with any other XexMenu/Loader before.
The old one shows up fine, but when I delete it and move the new version onto the HDD it won't appear.
It works if I run it manually from USB or burning to disc.
me too, no matter what i do i cant run xexmenu 1.1 from the Mu or hdd only from cd ?
anybody got a clue
Post by: syntaxerror329 on January 26, 2010, 04:32:00 PM
QUOTE(garyopa @ Jan 26 2010, 05:29 PM)
The way I get it onto the system the first time, is take any version and burn it onto a CDR (I use a CDRW) that way, I can then launch it from the 360 dashboard, and then just use itself to copy it over to the HDD works great. -- And if I don't want to reburn the CDR, I just put the new version on a usb stick, launch the old one from the CDR, and then browse to the USB stick, and copy it over the HDD.
Or if you got one working already on your HDD and you want to update it, launch the old one, then use it to launch the new one on the USB stick, then use that one to copy it over the old existing one on the HDD.
Thanks OPA. I am still learning this stuff. First disk i burned the live version. Realized my mistake and put the XEX version on a disk and problem solved.
Post by: AllSewnUp on January 26, 2010, 04:36:00 PM
FAT32 is fine. Would NTFS be nice? Yes, but there is a bunch of stuff I want more.
Post by: Sunblood on January 26, 2010, 04:49:00 PM
QUOTE(solider32 @ Jan 26 2010, 05:30 PM)
me too, no matter what i do i cant run xexmenu 1.1 from the Mu or hdd only from cd ?
anybody got a clue
Well I fixed it (somehow)
Got the latest version from Xbins, deleted any CODE9999 and related files/folders on mem card and hard drive. Ran 1.1 XEX from a disc, used it to copy 1.1 LIVE from USB to HDD.
Turned off 360, unplugged power cable for 10 seconds. Booted and there it was in the Games menu.
Post by: rupal on January 26, 2010, 04:53:00 PM
Post by: psyco118 on January 26, 2010, 05:16:00 PM
Post by: niai on January 26, 2010, 05:38:00 PM
Post by: Aldanga on January 26, 2010, 05:59:00 PM
QUOTE(effbee05 @ Jan 26 2010, 05:16 PM)
I thought I was 100mbit also but here's a screenshot:
I don't know what program you're using, but MB/s typically refers to megabit, not megabyte. As that's given, that transfer is moving at about 2.5 megabytes a second.
Post by: tornado89 on January 26, 2010, 06:09:00 PM
GPU temp doesn't exceed 37.8C now after idling for 30mins !
really nice job XeDEV
still ftp doesn't exceed 2~3 MB/S ..
Post by: aerofx on January 26, 2010, 06:09:00 PM
QUOTE(Aldanga @ Jan 26 2010, 04:59 PM)
I don't know what program you're using, but MB/s typically refers to megabit, not megabyte. As that's given, that transfer is moving at about 2.5 megabytes a second.
MB/s refers to Megabyte not megabit. Megabit is lowercase b.
Post by: Aldanga on January 26, 2010, 07:40:00 PM
QUOTE(aerofx @ Jan 26 2010, 07:09 PM)
MB/s refers to Megabyte not megabit. Megabit is lowercase b.I've seen it both ways--although you are correct according to IEEE (of which I am a member anyway and as such I should probably try to make sure I don't stick my foot in my mouth when referencing their technical terms). This confusion is an obvious problem which arises from using poorly-chosen abbreviations. Either way, having 20MB/s is impossible without having a port which can transfer at speeds higher than 100mbps--which the 360 doesn't have.
Now, using my super hero skills of logical deduction, I will venture to guess that his FTP client uses MB/s as an abbreviation for megabit.
Post by: ska_drummer85 on January 26, 2010, 07:59:00 PM
QUOTE(Sunblood @ Jan 26 2010, 05:11 PM)
For some reason I can't get this to show up in the Games menu. I haven't had a problem with any other XexMenu/Loader before.
The old one shows up fine, but when I delete it and move the new version onto the HDD it won't appear.
It works if I run it manually from USB or burning to disc.
I had the same problem. In XeXMenu_v1.1-LIVE.rar, the folder is named CODE9999. It should be C0DE9999. Change the "O" to a "0"
I was stuck there for about an hour since I put it on a new HDD and didn't have the C0DE9999 folder from before.
Post by: eyric101 on January 26, 2010, 08:19:00 PM
Post by: minooch on January 26, 2010, 08:19:00 PM
QUOTE(Aldanga @ Jan 27 2010, 01:40 PM)
I've seen it both ways--although you are correct according to IEEE (of which I am a member anyway and as such I should probably try to make sure I don't stick my foot in my mouth when referencing their technical terms). This confusion is an obvious problem which arises from using poorly-chosen abbreviations. Either way, having 20MB/s is impossible without having a port which can transfer at speeds higher than 100mbps--which the 360 doesn't have.
Now, using my super hero skills of logical deduction, I will venture to guess that his FTP client uses MB/s as an abbreviation for megabit. (IMG:style_emoticons/default/gift.gif)
He would be using FileZilla - it shows Megabit as Mb & Megabyte as MB.
The most likely cause is that FileZilla is actually showing incorrect values - I use it, and while monitoring network transfer rates elsewhere, FileZilla often spikes the transfer speed even though it isn't actually transferring that fast.
Post by: ITSa341 on January 26, 2010, 08:25:00 PM
Doh, nevermind....figured it out. Have to change it with the d-pad on the configuration screen. LOL took me over an hour to figure this out I guess it's time for bed.
This post has been edited by ITSa341: Jan 27 2010, 04:47 AM
Post by: BigSteel on January 26, 2010, 08:34:00 PM
Post by: Chaosplt on January 26, 2010, 08:40:00 PM
Post by: ska_drummer85 on January 26, 2010, 08:43:00 PM
QUOTE(BigSteel @ Jan 26 2010, 09:34 PM)
Ok, I just did my first J-tag and managed to get XeXMenu 1.1 installed by hooking my hard drive up to my PC and using Xplorer360. Question is, what do I need to do to get games on the hard drive, so that they show up in XeXMenu.
Make a folder named GAMES on the root of your xbox HDD or on the root of a USB HDD (must be a FAT32 or HFS+ partition). Make a new folder named the game you have in the drive within that folder. Browse to that folder in xexmenu and hit Y, then select Copy DVD. When it is finished you will be able to see it in xexmenu. I recommend deleting the $SystemUpdate folder after copying the game especially new ones like mass effect 2 because it will mess up your jtag if you choose yes on the update.
If you want to be able to launch these from the xbox dashboard as well, you can use the Quickboot tool to make shortcuts.
Post by: Chaosplt on January 26, 2010, 08:48:00 PM
can i still do it with HFS+ partition?
This post has been edited by Chaosplt: Jan 27 2010, 04:50 AM
Post by: BigSteel on January 26, 2010, 08:52:00 PM
QUOTE(ska_drummer85 @ Jan 26 2010, 08:43 PM)
Make a folder named GAMES on the root of your xbox HDD or on the root of a USB HDD (must be a FAT32 partition). Make a new folder named the game you have in the drive within that folder. Browse to that folder in xexmenu and hit Y, then select Copy DVD. When it is finished you will be able to see it in xexmenu. I recommend deleting the $SystemUpdate folder after copying the game especially new ones like mass effect 2 because it will mess up your jtag if you choose yes on the update.
Thanks for the info. Got it working...now I realize I need a much bigger than 20GB hard drive
Post by: eyric101 on January 26, 2010, 08:56:00 PM
Post by: ska_drummer85 on January 26, 2010, 09:02:00 PM
QUOTE(BigSteel @ Jan 26 2010, 09:52 PM)
Thanks for the info. Got it working...now I realize I need a much bigger than 20GB hard drive
Glad to help. In the XBReboot readme it says you can replace your 20 gb hdd with any laptop SATA hard drive. I haven't tried it myself, and I don't know the size limitations, but you might want to look into that. You can just take apart the case and pop the new one in (I think).
QUOTE(Chaosplt @ Jan 26 2010, 09:48 PM)
yea, thanks for showing us. Someone else did the jtag hack, i need to unsolder that stupid resister.
can i still do it with HFS+ partition?
Yes. Sorry about that. I just looked at the readme and yes you can use HFS+. Edited former post
Post by: BigSteel on January 26, 2010, 09:04:00 PM
QUOTE(eyric101 @ Jan 26 2010, 08:56 PM)
This is great work! Thanks. Next please please please, I want to watch movies while uploading!
Edit: hmm..just tried to install COD MW2 and it installed the first couple of files and then stopped...any ideas?
Post by: ska_drummer85 on January 26, 2010, 09:04:00 PM
QUOTE(eyric101 @ Jan 26 2010, 09:56 PM)
This is great work! Thanks. Next please please please, I want to watch movies while uploading!
Ha me too. We might have to wait for XBMC to do that.
Post by: Chaosplt on January 26, 2010, 09:07:00 PM
Post by: ska_drummer85 on January 26, 2010, 09:09:00 PM
QUOTE(BigSteel @ Jan 26 2010, 10:04 PM)
Edit: hmm..just tried to install COD MW2 and it installed the first couple of files and then stopped...any ideas?
Mine did that too and does it with a few other games. My workaround was to just ftp the game to my same USB HDD that my games are on. Or you could try copying files or folders one by one, but that would take forever since there's no multiple select yet.
It's not perfect yet, but thanks to the devs for making a great app that keeps getting better
Post by: BigSteel on January 26, 2010, 09:10:00 PM
Post by: ska_drummer85 on January 26, 2010, 09:20:00 PM
QUOTE(BigSteel @ Jan 26 2010, 10:10 PM)
What do you use to extract the .iso on your PC, so that you can FTP it over?
Never done that because I don't download or make iso's. I meant that I pulled the game files from the xbox via ftp. There's probably a tool in the tools section on xbox-scene.com or eurasia.nu
Post by: moja on January 26, 2010, 09:24:00 PM
QUOTE(BigSteel @ Jan 27 2010, 05:10 AM)
What do you use to extract the .iso on your PC, so that you can FTP it over?
Try XBox Image Browser. Worked for me.
Post by: Velocimodz on January 26, 2010, 09:51:00 PM
QUOTE(BigSteel @ Jan 27 2010, 05:04 AM)
Edit: hmm..just tried to install COD MW2 and it installed the first couple of files and then stopped...any ideas?
Yeah what I do when that happens is follow this order:
Have open the destination folder ie. USB0/GAMES/FATONE/
Then select COPY DVD from the Y menu
Let the draw open and put the disc in
Hit the eject button to close the disc draw
Wait 5 secs then select CONFIRM.
Its a timing thing with the spinning of the DVD, you cant do it too fast or too slow, just about 5 seconds after closing the drive.
If it still doesnt work, it probably is having trouble reading the disc due to marks/scratches.
Post by: Chaosplt on January 26, 2010, 09:52:00 PM
Post by: pwnreceiver on January 26, 2010, 09:56:00 PM
QUOTE(ska_drummer85 @ Jan 26 2010, 09:43 PM)
Make a folder named GAMES on the root of your xbox HDD or on the root of a USB HDD (must be a FAT32 or HFS+ partition). Make a new folder named the game you have in the drive within that folder. Browse to that folder in xexmenu and hit Y, then select Copy DVD. When it is finished you will be able to see it in xexmenu. I recommend deleting the $SystemUpdate folder after copying the game especially new ones like mass effect 2 because it will mess up your jtag if you choose yes on the update.
If you want to be able to launch these from the xbox dashboard as well, you can use the Quickboot tool to make shortcuts.
I thought XBR uses virtual fuses and I didn't think there was an update beyond 8955 yet, which should be what XBR is reporting. Therefore, there should be no update done, right?
Post by: ska_drummer85 on January 26, 2010, 10:01:00 PM
This post has been edited by ska_drummer85: Jan 27 2010, 06:45 AM
Post by: xlinkx on January 26, 2010, 10:50:00 PM
This post has been edited by xlinkx: Jan 27 2010, 06:52 AM
Post by: The Dude Z on January 26, 2010, 11:03:00 PM
QUOTE(garyopa @ Jan 26 2010, 05:24 PM)
Yep, I had this problem with v1.0 also.
If I installed any game on to the 360's own HDD, I would end up with a dead box, freeze upon relaunching the XeXMenu, if the game was inside the Games directory.
I really hope they fixed this bug. -- I have to test it out later and see!
I have all of my Games but 1 installed to the 360's own hdd in a Games folder in the root of the hdd and have never had it freeze and I have booted it many times with and without usb devices.
Have yo guys updated to the new version of XBReboot ?
Post by: radoman on January 26, 2010, 11:22:00 PM
QUOTE(The Dude Z @ Jan 27 2010, 06:03 AM)
I have all of my Games but 1 installed to the 360's own hdd in a Games folder in the root of the hdd and have never had it freeze and I have booted it many times with and without usb devices.
Have yo guys updated to the new version of XBReboot ?
Yes, I have the latest xbr. I'm also having this issue.
Post by: Shippy on January 26, 2010, 11:50:00 PM
QUOTE(The Dude Z @ Jan 27 2010, 06:03 AM)
I have all of my Games but 1 installed to the 360's own hdd in a Games folder in the root of the hdd and have never had it freeze and I have booted it many times with and without usb devices.
Have yo guys updated to the new version of XBReboot ?
what model of hdd do you have installed? I'm using a Seagate 500gb, formatted with nxe. v1.0 would black screen on launch if I used the hdd1:/games directory.
Post by: rulevoid on January 27, 2010, 08:48:00 AM
Does it matter if its an original or backup?
Do you still need to mod the dvd firmware to play and load from backup disks with XBR/XeXmenu?
While I'm at it (IMG:style_emoticons/default/tongue.gif)
Is it recommended to desolder the resistor to prevent updates blowing the e-fuse/overwriting portions of the XBR modded NAND memory?
Thanks all.
Edit: I am using the newest XBR with XeXMenu 1.1 and using my stock Xbox360 60gb hard drive. I am loading XeXmenu from NXE (LIVE Container)
Edit2: Just noticed a previous post about timing, i will try that method and repost my resuts for copying disk.
This post has been edited by rulevoid: Jan 27 2010, 05:04 PM
Post by: dakaku on January 27, 2010, 09:14:00 AM
QUOTE(rulevoid @ Jan 27 2010, 04:48 PM)
Do you still need to mod the dvd firmware to play and load from backup disks with XBR/XeXmenu?
QUOTE
Is it recommended to desolder the resistor to prevent updates blowing the e-fuse/overwriting portions of the XBR modded NAND memory?
With the resistor removed the nand will be "over"written, but your efuse wont be blown. You then have to write back your backup-nand or xbr. So remove it.
Post by: re.lax on January 27, 2010, 09:52:00 AM
Post by: Aldanga on January 27, 2010, 09:55:00 AM
Post by: rulevoid on January 27, 2010, 10:16:00 AM
QUOTE(Aldanga @ Jan 27 2010, 11:55 AM)
Is there a way to change the username/password for FTP? That feature (and, possibly, the adding of SFTP) would be appreciated by security-paranoid people like myself.
Are you transferring over the net or something?
Post by: Aldanga on January 27, 2010, 10:46:00 AM
QUOTE(minooch @ Jan 26 2010, 09:19 PM)
He would be using FileZilla - it shows Megabit as Mb & Megabyte as MB.
The most likely cause is that FileZilla is actually showing incorrect values - I use it, and while monitoring network transfer rates elsewhere, FileZilla often spikes the transfer speed even though it isn't actually transferring that fast.
*bows*
Thank you, sir.
This post has been edited by Aldanga: Jan 27 2010, 06:47 PM
Post by: node21 on January 27, 2010, 11:00:00 AM
QUOTE(Aldanga @ Jan 27 2010, 11:55 AM)
Is there a way to change the username/password for FTP? That feature (and, possibly, the adding of SFTP) would be appreciated by security-paranoid people like myself.
I'm not home, so I can't check...but I recall seeing an .ini file or something...I thought the ftp accounts were spelled out in there...
Post by: rulevoid on January 27, 2010, 11:03:00 AM
QUOTE(Aldanga @ Jan 27 2010, 12:46 PM)
I'm not, but I'm on a public network at my University and would like to keep things secure.
For the time being why dont you just direct connect a crossover cable from xbox to PC (second NIC) then assign both manual IP's within the same subnet with Gateways pointing at the other devices IP? That would be completely localized and a great solution for the time being.
Post by: mataman on January 27, 2010, 11:41:00 AM
QUOTE(intention @ Jan 27 2010, 12:08 AM)
I had this issue too. Had to revert back to Xexloader in the mean time.
Let us know if this is fixed!
I also had the issue with freezing xexmenu after i instaled some games in GAMES folder. Now with this new version this problem is fixed. Also I updated my xell to xellous 1.0 (maybe this will also help). Everything running smoothly now.
Post by: tohnolo on January 27, 2010, 12:43:00 PM
Post by: Aldanga on January 27, 2010, 12:53:00 PM
QUOTE(node21 @ Jan 27 2010, 12:00 PM)
I'm not home, so I can't check...but I recall seeing an .ini file or something...I thought the ftp accounts were spelled out in there...
Hmm. I've been using the Live file, but I'll check the .xex files and see if I can find something.
QUOTE(rulevoid @ Jan 27 2010, 12:03 PM)
For the time being why dont you just direct connect a crossover cable from xbox to PC (second NIC) then assign both manual IP's within the same subnet with Gateways pointing at the other devices IP? That would be completely localized and a great solution for the time being.
I don't have an ample supply of crossover cables at the moment (read: zero), so that's not plausible. It's not a huge deal as I don't anticipate someone hacking into my Xbox's memory in the near future, but it would be a nice feature to have available at some point.
Post by: tohnolo on January 27, 2010, 12:59:00 PM
QUOTE(Aldanga @ Jan 27 2010, 05:55 PM)
Is there a way to change the username/password for FTP? That feature (and, possibly, the adding of SFTP) would be appreciated by security-paranoid people like myself.
CODE
BindPort 21
CommandTimeout 300
ConnectTimeout 15
MaxConnections 20
Password "xbox"
Password "flash"
CommandTimeout 300
ConnectTimeout 15
MaxConnections 20
Password "xbox"
Password "flash"
Dont know does changing them work, have not tried my self.
Post by: Aldanga on January 27, 2010, 01:03:00 PM
Post by: Haygar on January 27, 2010, 01:39:00 PM
QUOTE(Shippy @ Jan 27 2010, 09:01 AM)
Do you have your games installed on hdd1:/games?
Using XeXMenu v1.0, the program would freeze if I had my games there (I have no USB devices connected). Since I only had 1 game installed there (and 2 via NXE) i went ahead and reformatted the drive via NXE, reinstalled XeXMenu, and then made a new directory called hdd1:/tmp to store my games. I have to manually launch each game.
Exactly what I find, if I have a usb with xexmenu on it as well, no probs or if I rename the games folder to anything other than \Games and load manually.
What model are you guys getting this problem on, I have no worries on falcon but jasper BB has the issue with me.
Ok....... just found out it could be the type of hdd so will look into that.
This post has been edited by Haygar: Jan 27 2010, 10:06 PM
Post by: acerman on January 27, 2010, 04:36:00 PM
Post by: ][UNREAL][ on January 27, 2010, 07:28:00 PM
QUOTE(acerman @ Jan 27 2010, 09:36 PM)
What dir does the emus go in ? Mine will not auto discover
Put "0" in option: Discover only "default.xex" and put the emus on "emulators" folder.
This post has been edited by ][UNREAL][: Jan 28 2010, 03:29 AM
Post by: Sascoo on January 27, 2010, 07:36:00 PM
I deleted my system cache and the system update in the l4d2 folder. I don't think I updated to the newest xellous. Could this be the problem?
Post by: xlinkx on January 27, 2010, 09:37:00 PM
QUOTE(Haygar @ Jan 27 2010, 10:39 PM)
Exactly what I find, if I have a usb with xexmenu on it as well, no probs or if I rename the games folder to anything other than \Games and load manually.
What model are you guys getting this problem on, I have no worries on falcon but jasper BB has the issue with me.
Ok....... just found out it could be the type of hdd so will look into that.
Some hard drives work and some don't but I think it's just a bug in xexmenu because xexloader 2.6 works with all hard drives.
Post by: DrexeL_UK on January 28, 2010, 07:43:00 AM
QUOTE(Sascoo @ Jan 28 2010, 02:36 AM)
Freezes when launching Left 4 Dead 2. I see a checkered pink and black screen where the checkers are around 2 inches across on a 19" screen.
I deleted my system cache and the system update in the l4d2 folder. I don't think I updated to the newest xellous. Could this be the problem?
Left 4 dead 2 works perfectly for me, and I haven't updated to xellous.
This post has been edited by DrexeL_UK: Jan 28 2010, 04:01 PM
Post by: Garyfez on January 28, 2010, 09:59:00 AM
QUOTE(tohnolo @ Jan 27 2010, 09:43 PM)
Nice to have new version out! Upload speeds are much faster on this version. I only have one problem, been trying to get fable2 to work with xexmenu but no success. Game starts fine but when i start new game it freezes. Does anybody have solution for this? (IMG:style_emoticons/default/unsure.gif)
I have same problem with mass effect 2 but works fine in xexloder
Post by: danthaman673 on January 28, 2010, 10:52:00 AM
QUOTE(Aldanga @ Jan 27 2010, 10:29 AM)
I don't know what program you're using, but MB/s typically refers to megabit, not megabyte. As that's given, that transfer is moving at about 2.5 megabytes a second.
actually, MBS is megabits per second as u said but, that's wrong because 1 megabyte = 1024 bytes, (bytes not bits
Can anyone tell me why the proverbial Xexmenu (either version) WILL NOT COPY GAMES!!! It also has probs deleting. I've tried it with XBR3a and Freeboot, no joy. I got a game to copy with xexloader ,then I patched it with xexmenu , it worked for a while but later (having changed HDD's etc.. and maybe what profile I was using if any,) It stopped booting for no reason (MW2)?????????????????????
Post by: microhard on January 28, 2010, 11:24:00 AM
Will it ever be possible to display the temps onscreen while playing a 360 game?
Post by: indy5 on January 28, 2010, 01:59:00 PM
Now using 1.1, my initial transfer speeds were much better. I was seeing around 10 MB/sec from both ftp apps. The strange part is with large files (2+gigs, etc). In transferring a 2 gb file, the first 400 MB or so transfers at a rate of around 10 MB/sec. From around 400-500 MB, it starts dropping to around 5 MB/sec. When the transfer reaches about 500-600 MB, it drops down to 2 MB/sec. By the time a 2 GB file completes, I am seeing about 5-600 Kb/sec.
Any reason why the file transfer slows down as the file size increases? If I transfer a ton of 10 meg files, my rate will remain around 10 MB/sec, it's just these big ones that are cauing an issue.
Thanks!
Post by: ska_drummer85 on January 28, 2010, 02:05:00 PM
Post by: krizalid on January 28, 2010, 02:20:00 PM
Due to the fact that we may add applications to x:\applications\appname\default.xex
XeXMenu will always scan, build game lists cache and extract info from the .xex file; but what happens with .xex files like Autospeed.xex (for fan speeds, patch or not) ?
XeXMenu will freeze, lock up your 360 and sometimes throw off E71.
Power off and back on and it's all good.
Just sharing a finding.
Cheers.
Post by: simon_pascald on January 28, 2010, 02:32:00 PM
My copydvd fonction wasn't working before but I used the trick of someone in the thread and now it's working like a charm!
it's all about the timing!
when you click on CopyDVD, the dvd drive ejects, press on the eject button and wait 5 seconds, you'll hear the drive loading the disc, that's when you gotta press confirm!
worked for me!
thanks to the guy who found this!
Post by: BladeWing on January 28, 2010, 03:56:00 PM
Post by: dufc1983 on January 28, 2010, 04:18:00 PM
QUOTE(BladeWing @ Jan 29 2010, 12:56 AM)
Sorry, quck question, but whats the difference between XeXmenu and XeXloader ?? I dont know which i should download, and i'm hungry for some Homebrew (IMG:style_emoticons/default/biggrin.gif)
xexloader was its original name when it was basically just a loader for xex's lol hense the name,now it has additional features like ftp so its now got a new name Xexmenu (IMG:style_emoticons/default/biggrin.gif) out of interest any plans to make some 360 rock band customs here's a guide for jtag custom making http://sites.google.com/site/mahoppiangoon/customrbdlc
Post by: lcollier93 on January 28, 2010, 05:51:00 PM
Post by: DARKFiB3R on January 28, 2010, 05:53:00 PM
QUOTE(lcollier93 @ Jan 28 2010, 11:51 PM)
ok i've been looking all over and i can't find it. can someone show a me a link or tell me how to install this to the hard drive via transfer cable(unless there's an easier way?). I've just jtagd my xbox and got xbr on and i want xexmenu!
http://stainedfuture...re-intallation/
Post by: lcollier93 on January 28, 2010, 05:55:00 PM
QUOTE(DARKFiB3R @ Jan 28 2010, 06:53 PM)
thank you thank you thank you.
Post by: hfmls on January 28, 2010, 06:22:00 PM
i press copy and it returns to menu
Post by: Sunblood on January 28, 2010, 08:10:00 PM
QUOTE(hfmls @ Jan 28 2010, 07:22 PM)
copyDVD isn't working in xexmenu 1.1, anyone with same problem?
i press copy and it returns to menu
Read the thread a little bit.
Close the tray manually and let it spin a bit before you hit A to start the copy process.
Post by: hfmls on January 28, 2010, 09:18:00 PM
Post by: tohnolo on January 28, 2010, 10:58:00 PM
QUOTE(Garyfez @ Jan 28 2010, 06:59 PM)
I have same problem with mass effect 2 but works fine in xexloder
Post by: danthaman673 on January 29, 2010, 01:36:00 AM
QUOTE(Sunblood @ Jan 29 2010, 12:40 PM)
Read the thread a little bit.
Close the tray manually and let it spin a bit before you hit A to start the copy process.
Yeah I already tried that one before reading the thread
. The only way I can get it all working is load the games with Xexloader 0.26 (which freezes ocassionally) then patch with xexmenu 1.1.Brgds/ Dan
Post by: BladeWing on January 29, 2010, 07:39:00 AM
Post by: Mumid on January 30, 2010, 11:17:00 AM
Apart from that very sweet indeed, FTP feature is awesome and very fast too.
Post by: iceman2048 on January 30, 2010, 02:02:00 PM
I was just curious, when you launch a game through xexmenu, does xexmenu stay in memory? Or does it start the game and then end its process?
Thanks in advance.
Post by: aubrey_76 on January 30, 2010, 07:50:00 PM
QUOTE(iceman2048 @ Jan 30 2010, 04:02 PM)
Xexmenu is awesome!!! Works quite well (except for "slow" ftp transfers, about 2.5-3MB/s but that's ok).
I was just curious, when you launch a game through xexmenu, does xexmenu stay in memory? Or does it start the game and then end its process?
Thanks in advance.
Can you tell me how you have your "FTP SETUP"?
I tried to use the Datel XSATA but it kept turning my Xbox 360 off after about 5 minutes. So I ordered a Linksys Wireless N++ Router and just got it in the mail today. I want to connect my JTAG Xbox 360 to the wireless router but I dont want it to connect to the internet. As of right now, only my desktop PC is plugged into "slot 1" on my wireless router. I have 3 more open slots to use. I want my JTAG Xbox 360 to stay plugged into the wireless router, but I only want my PC to have access to the JTAG Xbox. I dont want my Xbox 360 going online and messing up the JTAG. I have turned the setting to the "do not connect to LIVE" in the settings menue of my JTAG Xbox 360. I read through this whole thread and nothing was said about setting up the FTP and how to keep the Xbox 360 from connecting to LIVE.
Whats the name of the FTP client that you think is best?
What settings do I set on my PC and in what menu?
What settings do I set on my Xbox 360 and in what menu?
Do I change my FTP settings in the original NXE network settings menu or do I do them in XexMenu?
When I want to FTP, do I have to be in the XexMenu or can I be on the NXE menu?
Sorry, I looked at all the title threads and didnt see a FTP tutorial. If I have missed it somewhere, please point me to it.
Thanks in advance
Post by: iceman2048 on January 30, 2010, 09:51:00 PM
I use flashfxp. A great program, use it to FTP to my xbox 1 as well. Though it is shareware......
Secondly, I set flashfxp to "Active Mode". This was accomplished by going to (in flashfxp) Options > Preferences >Proxy. Here you will see a check box beside "Use Passive Mode" be sure this box is UNchecked.
Since you've already disabled xbox live access from the console itself, you should be ready (at least that is what I've done thus far).
When you wish to FTP to your xbox 360, start xexmenu on your console, then simply click "Quick Connect" (in flashfxp), then enter the IP address of your xbox 360 in the "Server/Url" fiield (the IP address can be obtained from xexmenu). The user name will be "xbox" (no quotes), and the password is also "xbox" (again with no quotes). Then click connect and it should connect
Post by: aubrey_76 on January 30, 2010, 10:03:00 PM
QUOTE(iceman2048 @ Jan 30 2010, 11:51 PM)
I will try my best to answer your questions.
I use flashfxp. A great program, use it to FTP to my xbox 1 as well. Though it is shareware......
Secondly, I set flashfxp to "Active Mode". This was accomplished by going to (in flashfxp) Options > Preferences >Proxy. Here you will see a check box beside "Use Passive Mode" be sure this box is UNchecked.
Since you've already disabled xbox live access from the console itself, you should be ready (at least that is what I've done thus far).
When you wish to FTP to your xbox 360, start xexmenu on your console, then simply click "Quick Connect" (in flashfxp), then enter the IP address of your xbox 360 in the "Server/Url" fiield (the IP address can be obtained from xexmenu). The user name will be "xbox" (no quotes), and the password is also "xbox" (again with no quotes). Then click connect and it should connect
Thank you!!! Perfect Directions!
Why exactly do you need to uncheck the "Use Passive Mode"......just wondering what this does when it is checked versus when it is not checked.
I have transferred XBOX LIVE GAMES, Emulators and Apps and they all workd perfectly.
One more question though. I am using a OEM 120 GB XBox 360 HDD and there seems to be a problem with transfering a certain amount of SNES ROMS......is there a limit to the number that can be in a folder. I have about 11,000 SNES Roms.... any advice.
Thanks again for your help
Post by: iceman2048 on January 30, 2010, 10:05:00 PM
To be honest, I have no clue as to why active mode is preferred over passive. Perhpas it affects transfer speeds in some way?
As for your rom situation, I do not know how to resolve
There may be some upper limit as the the number of files that can be present in one folder, but again, I'm not entirely sure.
Post by: dufc1983 on February 02, 2010, 10:43:00 AM
Post by: ddxcb on February 02, 2010, 12:58:00 PM
Post by: dietz on February 03, 2010, 12:52:00 PM
QUOTE(dufc1983 @ Feb 2 2010, 06:43 PM)
any chance of name support for title updates,it would be handy if ppl need to delete any and i like most have hundreds in my cache folder so support for name would be alot easier to browse through
I was thinking the same thing, but for all 'known' files.
Show all 'translated' text in a different color.
And make a switch for showing original folder/filename (5841097E) or showing the translated text (Battlefield 1943 in different color).
Different color only on translated text, not on whole path.
Hdd1:\Content\0000000000000000\45410830\00007000\.......
or
Hdd1:\Content\0000000000000000\Left 4 Dead\GameOnDemand\.......
Well, I think you know what I mean..
Post by: jhoff80 on February 03, 2010, 01:06:00 PM
QUOTE(iceman2048 @ Jan 31 2010, 01:51 AM)
Secondly, I set flashfxp to "Active Mode". This was accomplished by going to (in flashfxp) Options > Preferences >Proxy. Here you will see a check box beside "Use Passive Mode" be sure this box is UNchecked.
Very much appreciated, this doubled my transfer speeds from the horrible 1-1.5MB/s to the much more passable 2-3MB/s.
Still would like to see more speed, but can't complain too much about it.
Post by: BladeWing on February 03, 2010, 01:10:00 PM
Is there something speacial i have to do to get stuff to appear there, as i can navigate around my devices and run them manually, but doing that for every little thing is getting quite annoying.
Post by: doveman007 on February 04, 2010, 04:47:00 PM
Post by: nevernow on February 04, 2010, 05:31:00 PM
QUOTE(BladeWing @ Feb 3 2010, 09:10 PM)
when i enter into XeXMenu, there is nothing listed under Games/Apps/Emulators etc.
Is there something speacial i have to do to get stuff to appear there, as i can navigate around my devices and run them manually, but doing that for every little thing is getting quite annoying.
Your executable must be in the directories Xexmenu scans.
CODE
- Use GAMES, APPLICATIONS, EMULATORS for auto discovery menu on each device
Also, there is an option in the configuration tab to also show executables not named "default.xex" (XM360 is one of them).
Post by: jhoff80 on February 04, 2010, 09:50:00 PM
QUOTE(doveman007 @ Feb 4 2010, 08:47 PM)
I see others have reported this problem, but for me too XexMenu 1.1 just locks up on a black screen if I try and load it with any games installed under hdd1:\games\
Me too... and unfortunately, that's the only way that I can access my drive, because the partitions don't show up correctly in Xport, FATXplorer, Xplorer360, or LeFluffie, so I really hope this gets fixed soon.
Edit: Was able to fix it by plugging in a USB drive.
Post by: savagepoop on February 05, 2010, 08:52:00 AM
QUOTE(jhoff80 @ Feb 5 2010, 04:50 AM)
Me too... and unfortunately, that's the only way that I can access my drive, because the partitions don't show up correctly in Xport, FATXplorer, Xplorer360, or LeFluffie, so I really hope this gets fixed soon.
Edit: Was able to fix it by plugging in a USB drive.
i was having this problem for a few days and managed to solve it by renaming the folder "games" from "games" to "Games" all i did was capitalize the G and it works fine now
before i did that it would just sit on the black screen
Post by: jhoff80 on February 05, 2010, 11:08:00 AM
QUOTE(savagepoop @ Feb 5 2010, 12:52 PM)
i was having this problem for a few days and managed to solve it by renaming the folder "games" from "games" to "Games" all i did was capitalize the G and it works fine now
before i did that it would just sit on the black screenWeird, I'm pretty sure the G was capitalized for me. Anyway, I'm mostly using GoD containers from my discs anyway, just was trying out the XexMenu game launching function, so I just deleted the Games folder entirely once I got into XexMenu.
Post by: Verminaardd on February 12, 2010, 01:38:00 AM
Using XeXMenu 1.1
I have extracted the ISO using XBOX Image Browser v1 build 0002 and copied the content to a USB Stick (\Games\name-of-the-game\....)
Game discovery finds it, but when I try to run it. It says "The game can't run, please download again)
I tried to patch the xex files, same thing happens, the game doesn't run.
Is there any way to play these games without burning them onto DVD's?
Thanks to all in advance.
EDIT: It works if I use the "CopyDVD" option from within the XeXMenu
This post has been edited by Verminaardd: Feb 12 2010, 09:55 AM
Post by: EluZioN on February 13, 2010, 12:15:00 AM
More info on the black screen freeze if it helps. I have xexmenu 1.1 on 2 jtag'd boxes, both with identical WD BEVS 250GB drives. One is a Falcon, the other is a Jasper 512.
Both were working fine, even after installing a Games folder on the HDD. Then on the Falcon my son changed the resolution and time/date settings, then played a few games (launching with Freestyle). Now the Falcon black screens loading xexmenu from either the hard drive, or the CD. There are no USB drives attached, never were. If I load the CD and have the HD detached, all is well and it loads using no profile. I did the identical changes on the Jasper, however xexmenu loads fine on it.
It has to be something in the profiles that's causing this? Maybe the obvious question is, why does it need to load a profile anyway?
I'm currently deleting the Games folder to see if it will then load.
Regards,
EluZioN
Post by: EluZioN on February 13, 2010, 12:38:00 AM
Deleting the Games folder did in fact work on the Falcon, but I suspect the Games folder itself is not the issue. On the Jasper I have 5 older games (singing games, monopoly and trivial pursuit), on the Falcon I had one game, BioShock 2.
Maybe there's something in the new game (like the triple xex's in the root folder of it) that cause xexmenu to freeze?
Going to put my games in Freestyle/Games for now, I only use xexmenu for the utilities anyway (which are awesome btw).
Regards,
EluZioN
Post by: bushman on February 13, 2010, 12:42:00 AM
QUOTE(EluZioN @ Feb 13 2010, 08:15 AM)
Hello All,
More info on the black screen freeze if it helps. I have xexmenu 1.1 on 2 jtag'd boxes, both with identical WD BEVS 250GB drives. One is a Falcon, the other is a Jasper 512.
Both were working fine, even after installing a Games folder on the HDD. Then on the Falcon my son changed the resolution and time/date settings, then played a few games (launching with Freestyle). Now the Falcon black screens loading xexmenu from either the hard drive, or the CD. There are no USB drives attached, never were. If I load the CD and have the HD detached, all is well and it loads using no profile. I did the identical changes on the Jasper, however xexmenu loads fine on it.
It has to be something in the profiles that's causing this? Maybe the obvious question is, why does it need to load a profile anyway?
I'm currently deleting the Games folder to see if it will then load.
Regards,
EluZioN
I have the exact same problem on a falcon as well. It was working.... now a black screen no matter what.
I was trying to get games to load off of my usb hdd, they would all black screen. I then transfered a game to the stock hdd. I created a Games directory on the root and they booted fine. Also I installed a number of xbla games. After a couple days of playing the games xexmenu started black screening. At first i could get it to boot maybe 2 out of 5 times. Now it won't boot at all. Not even from a dvd. I also removed the Games folder I added to the stock hdd. Also I removed any save files still nothing....
Post by: iTry on February 16, 2010, 07:36:00 PM
Then everyone could post some clean screens of their temps
Post by: Porta360 on February 17, 2010, 07:18:00 AM
QUOTE(EluZioN @ Feb 13 2010, 02:38 AM)
Update:
Deleting the Games folder did in fact work on the Falcon, but I suspect the Games folder itself is not the issue. On the Jasper I have 5 older games (singing games, monopoly and trivial pursuit), on the Falcon I had one game, BioShock 2.
Maybe there's something in the new game (like the triple xex's in the root folder of it) that cause xexmenu to freeze?
Going to put my games in Freestyle/Games for now, I only use xexmenu for the utilities anyway (which are awesome btw).
Regards,
EluZioN
One of my friends Xbox did the same thing. Everything was working great, then he tried to play BioShock 2. he's been having problems ever since.
Post by: seppelq on February 17, 2010, 10:14:00 AM
Post by: dOOfus30 on February 19, 2010, 01:15:00 AM
QUOTE(seppelq @ Feb 17 2010, 09:14 AM)
i cannot write to my usb HFS+ drive with xexmenu. is that normal?
yes, you need fat32 to have write access.
QUOTE(indy5 @ Jan 28 2010, 12:59 PM)
I have noticed something a bit strange with ftp transfers. I was having terrible rates using 1.0, which were around 1-2 MB/sec. I tried using both flashfxp and filezilla with the same results.
Now using 1.1, my initial transfer speeds were much better. I was seeing around 10 MB/sec from both ftp apps. The strange part is with large files (2+gigs, etc). In transferring a 2 gb file, the first 400 MB or so transfers at a rate of around 10 MB/sec. From around 400-500 MB, it starts dropping to around 5 MB/sec. When the transfer reaches about 500-600 MB, it drops down to 2 MB/sec. By the time a 2 GB file completes, I am seeing about 5-600 Kb/sec.
Any reason why the file transfer slows down as the file size increases? If I transfer a ton of 10 meg files, my rate will remain around 10 MB/sec, it's just these big ones that are cauing an issue.
Thanks!
i'm having the same problem. the transfer gradually slows down when transferring large files.
Post by: death69inc on February 25, 2010, 06:23:00 PM
but works with my 20 60 120 and 250?
emus wokring well all but mame it cant seem to find roms ever
dlc working etc etc nothign in code9999 working quickboots xexmenu nothing
Post by: EluZioN on February 28, 2010, 02:15:00 AM
QUOTE(death69inc @ Feb 25 2010, 05:23 PM) 
any idea why nothign in the code9999 folder loads only on my 320 hdd
but works with my 20 60 120 and 250?
emus wokring well all but mame it cant seem to find roms ever
dlc working etc etc nothign in code9999 working quickboots xexmenu nothing
Please don't take offense, but are you sure the folder is named "C0DE9999" with the second character being a Zero, not the Letter O? I had the same problem you are describing when I used the letter O.
Good Luck,
EluZioN
Post by: spider2 on March 01, 2010, 10:29:00 AM
I have problem wint xexmenu1.1. When I start it no games there. It say: No games discovered. What can I do with this? Anyway I have 4 games on my official hdd on content/0000000000000000/
Post by: R1chard5 on March 01, 2010, 12:21:00 PM
QUOTE(spider2 @ Mar 1 2010, 06:29 PM)
Hi!
I have problem wint xexmenu1.1. When I start it no games there. It say: No games discovered. What can I do with this? Anyway I have 4 games on my official hdd on content/0000000000000000/
Content folder is reserved for DLC/XBLA games.
If you are talking about full games extracted, you will need to put them in hdd's root /GAMES directory
for them being detected.
Post by: spider2 on March 01, 2010, 02:21:00 PM
QUOTE(R1chard5 @ Mar 1 2010, 08:21 PM)
Content folder is reserved for DLC/XBLA games.
If you are talking about full games extracted, you will need to put them in hdd's root /GAMES directory
for them being detected.
I tryed it but nothing happend. Make a /GAMES directory and put one game from contetn (cut/paste) like this structure:
hdd1:/GAMES/545407F2/00007000/9970C8C7FBA02C22AD5B.data/....
And now?
Thank You
Post by: R1chard5 on March 01, 2010, 04:36:00 PM
QUOTE(spider2 @ Mar 1 2010, 10:21 PM)
I tryed it but nothing happend. Make a /GAMES directory and put one game from contetn (cut/paste) like this structure:
hdd1:/GAMES/545407F2/00007000/9970C8C7FBA02C22AD5B.data/....
And now?
Thank You
nice mess
What are you trying to play ?
If it's a XBLA, xexmenu doesn't play them.
And location is as you said Content/00000000.
So your solution would be to use XM360 or Freestyle (or any other).
So transfer it back to Content/00000000 and launch one of those apps
to play it.
If it's a full "DVD" game ..., well in that case this doesn't look like it is.
Post by: spider2 on March 01, 2010, 11:26:00 PM
QUOTE(R1chard5 @ Mar 2 2010, 12:36 AM)
nice mess
What are you trying to play ?
If it's a XBLA, xexmenu doesn't play them.
And location is as you said Content/00000000.
So your solution would be to use XM360 or Freestyle (or any other).
So transfer it back to Content/00000000 and launch one of those apps
to play it.
If it's a full "DVD" game ..., well in that case this doesn't look like it is.
It's a full game which I made from iso wit Iso2God. Then I upload with ftp. (Alien vs Predator, MW2, ...) I can run this game from the original dash, but in Xexmenu and Freestyle dash not discovered it....
Post by: R1chard5 on March 02, 2010, 08:40:00 AM
And GOD is only made for launching directly from original dash i guess,
i never used that personally.
Post by: boxer25 on March 03, 2010, 08:31:00 PM
Thanks in advance.
Post by: akula169 on March 05, 2010, 06:39:00 PM
I can't seem to make this happen (one of my boxes has broken wired ethernet for some reason)
Is anyone else able to use FTP with the Microsoft Wireless N Adapter (the black one)?
This post has been edited by akula169: Mar 6 2010, 02:41 AM
Post by: akula169 on March 05, 2010, 09:24:00 PM
QUOTE(akula169 @ Mar 5 2010, 06:39 PM)
For an earlier version of xexmenu, I saw a report of the wireless adapter working with xexmenu
I can't seem to make this happen (one of my boxes has broken wired ethernet for some reason)
Is anyone else able to use FTP with the Microsoft Wireless N Adapter (the black one)?
more info: the config section shows that I have the expected IP address.
Not sure what's wrong.
Post by: cornnatron on March 06, 2010, 01:01:00 AM
QUOTE(akula169 @ Mar 6 2010, 05:24 AM)
more info: the config section shows that I have the expected IP address.
Not sure what's wrong.
Why do you think your ethernet is broke ?
Your wireless wouldnt work nether than couse that is also connected trough the ethernet port .
Post by: akula169 on March 06, 2010, 03:00:00 AM
QUOTE(cornnatron @ Mar 6 2010, 01:01 AM)
Why do you think your ethernet is broke ?
Your wireless wouldnt work nether than couse that is also connected trough the ethernet port .
No, the wireless module connects to the USB jack in the back. It works just fine for "normal" LAN stuff like music streaming, video and system link games, etc.
And yes, I am very sure the wired Ethernet port does not work. The operation of the wireless adapter is completely independent of that issue.
Post by: welly_59 on March 06, 2010, 03:57:00 AM
Post by: s3kt0r on March 06, 2010, 04:31:00 AM
Is there a way to get this working again? Can I acess ftp like this?
P.s. Maybe just format HDD and try again?
Another edit: Yes, formatting also resolves the problem, xexmenu starts loading again.
This post has been edited by s3kt0r: Mar 6 2010, 12:47 PM
Post by: akula169 on March 06, 2010, 10:29:00 AM
QUOTE(welly_59 @ Mar 6 2010, 03:57 AM)
wireless adaptor works through the ethernet port, just uses usb for power
Um, again, No. I'm not sure which one you all are thinking of, but:
Now, to get back on topic: we're not here to argue about *how* the wireless adapter works, I just want to know if others have it *working with XeXMenu*.
Again, it works just fine for me with normal 360 networking. Just not any of the homebrew dashboards.
Thanks.
Post by: mrluke on March 15, 2010, 05:39:00 AM
QUOTE(akula169 @ Mar 6 2010, 07:29 PM)
Um, again, No. I'm not sure which one you all are thinking of, but:
Now, to get back on topic: we're not here to argue about *how* the wireless adapter works, I just want to know if others have it *working with XeXMenu*.
Again, it works just fine for me with normal 360 networking. Just not any of the homebrew dashboards.
Thanks.
My wireless adapter works fine with Xexmenu , in that i can FTP in pretty quick
Problem though The USB EXT HDD , i cant transfer to
.. do i need to chmod it ?I can transfer to the internal HDD fine
Post by: Drefsab on March 15, 2010, 06:58:00 AM
Post by: akula169 on March 15, 2010, 12:00:00 PM
QUOTE(Drefsab @ Mar 15 2010, 05:58 AM)
my wireless N dongle works fine in XeXmenu and freestyle.
Yeah - it was my dumb mistake. Made an adjustment to the router configs for my wireless bridge and all is well now.
QUOTE(mrluke @ Mar 15 2010, 04:39 AM)
My wireless adapter works fine with Xexmenu , in that i can FTP in pretty quick
Problem though The USB EXT HDD , i cant transfer to (IMG:style_emoticons/default/sad.gif) .. do i need to chmod it ?
I can transfer to the internal HDD fine (IMG:style_emoticons/default/biggrin.gif)
I'm pretty sure you can only write to FAT formatted USB drives.
Post by: mrluke on March 15, 2010, 02:09:00 PM
QUOTE(akula169 @ Mar 15 2010, 08:00 PM)
Yeah - it was my dumb mistake. Made an adjustment to the router configs for my wireless bridge and all is well now.
I'm pretty sure you can only write to FAT formatted USB drives.
Explains alot ! im using HFS+ ..
Many thanks
Luke
Post by: akula169 on March 15, 2010, 02:30:00 PM
QUOTE(mrluke @ Mar 15 2010, 01:09 PM)
Explains alot ! im using HFS+ ..
Many thanks
Luke
Yeah - HFS is def not writable by xexmenu.
Post by: evil666 on March 18, 2010, 11:10:00 AM
QUOTE(AllSewnUp @ Jan 26 2010, 06:36 PM)
Why even worry about NTFS? Media support is much more pressing as well as HTTP support.
FAT32 is fine. Would NTFS be nice? Yes, but there is a bunch of stuff I want more.
Now let me know if I am wrong but, Fat32 has a 4 gig limit per file. Most of these images are 8 gigs no? This would be why ntfs is needed.
Post by: recall2000 on March 18, 2010, 11:16:00 AM
QUOTE(evil666 @ Mar 18 2010, 05:10 PM)
Now let me know if I am wrong but, Fat32 has a 4 gig limit per file. Most of these images are 8 gigs no? This would be why ntfs is needed.
Yea the limit is 4GB per file..but if you extract the isos I've yet to see a file bigger than a couple of GB, so this limit isn't a problem.
Post by: evil666 on March 18, 2010, 12:20:00 PM
QUOTE(recall2000 @ Mar 18 2010, 12:16 PM)
Yea the limit is 4GB per file..but if you extract the isos I've yet to see a file bigger than a couple of GB, so this limit isn't a problem.
Ahhh got ya. I have not modded mine yet, waiting on big block cygnos.
Post by: akula169 on March 18, 2010, 12:23:00 PM
QUOTE(recall2000 @ Mar 18 2010, 10:16 AM)
Yea the limit is 4GB per file..but if you extract the isos I've yet to see a file bigger than a couple of GB, so this limit isn't a problem.
Or just ISO2GOD them... automatically split up into nice little 170.5MB bites.
Post by: Lurkin on March 18, 2010, 02:09:00 PM
The one with the 640 drive, when I try and run XEXMenu it just locks up to a black screen. But if I reduce the amount of data on the drive then it works. Is there a limit or a fix for xexmenu crashing because it tries to scan too much information? I only have a few games copied to the drive and they are all NXE2GOD conversions, only 1 FF13 is an ISO2GOD conversion in the games folder.
I am just confused as to why Xexmenu crashes on this one but not the other one. I have tried running it from disc, from live package and from default.xex from like freestyle or xm360 which both work fine.
I formatted the drive again at one point and xexmenu worked again until I started putting my xbla, dlc and games back on it.
Post by: Makave7iThaDon on March 27, 2010, 02:14:00 PM
I had two games installed in the "games" folder of my hdd, FF13 and mass effect 2. And I never had an issue with xexmenu at all, it would boot up and always list those two games except that sometimes the icon wasn't there on mass effect. But FF13 was always the FIRST GAME in the list, and that icon was always there.
So then I ended up deleting FF13, and so I was only left with ME2 on it. As soon as I did this and ME2 was the only game in my games folder xexmenu would black screen on me 9 times out of ten when it loaded up. All I had to do was to change the name of the games folder real quick so that it didn't try and load up mass effect 2 and it would boot fine every single time.
The solution for me ended up being to change the "auto extract game names" setting from the default of 1 to 0.
Ever since I have done that it has loaded up and listed mass effect 2 for me perfectly literally probably 30 times in a row now without a single issue.
After feeling I solved it, I was curious if that really did fix it, and so I loaded it up, changed it back again from 0 to 1, and sure enough the very next time I started xexmenu it black screened on me AGAIN.
So I went back in and changed the setting to 0, and it's good to go again.
So anyone who has some unexplainable things that they can't pin point that is giving them black screen troubles in xexmenu, try changing that auto extract game names setting from the default of 1 to 0 and see if it fixes your issue like it did mine.
Cheers
Post by: davster007 on April 17, 2010, 09:01:00 PM
Post by: Evillvi on May 14, 2010, 01:22:00 PM
an error occurred opening that folder on the ftp server. make sure you have permission to access that folder.
details: an internal error occured in the microsoft internet extensions.
ive goolged that error message but i keep getting links to issues with internet explorer. i know i can just use flashfxp but id rather do it this way because i like it better with uploading files to the xbox. any help is greatly appreciated.
Post by: alumeto on June 24, 2010, 05:04:00 PM
Problem: XEXMENU 1.1
Load from cd to HDD code099...
Xexmenu run fine.
But when i create called Games folder on internal HDD (1TB) xexmenu restart my console. When usb plug in run perfectly. No games at my usb. Its general bug?
Problem solved
At xexmenu delete all data on my usb. Then remove. Go to dboard. XEXMENU run again