Post by: Xbox-Scene on January 15, 2010, 08:38:00 PM
| Redline99 released an XDK (XEX) flasher to overwrite your NAND (like for an XBReboot update) directly from your homebrew Xbox 360! From the readme/nfo: Quote
Official Site: n/a, by Redline99 Download: n/a (built with XDK) News-Source: xbins.org |
Post by: classiccrime on January 15, 2010, 08:41:00 PM
Post by: Lush on January 15, 2010, 08:47:00 PM
Post by: darandon on January 15, 2010, 08:49:00 PM
cheers
Post by: ddxcb on January 15, 2010, 08:52:00 PM
and I dont mean a live linux CD i mean a *.elf file on a flash drive.
Post by: minus5252 on January 15, 2010, 08:52:00 PM
Minus
Post by: xxpittbullxx on January 15, 2010, 09:04:00 PM
THX So Much Redline99
Post by: drkoolbeanz on January 15, 2010, 09:05:00 PM
Post by: kingpickle on January 15, 2010, 09:19:00 PM
Post by: biggnick on January 15, 2010, 09:19:00 PM
Seems like the 360 will replace the original Xbox as the main media hub soon...haven't kept up with the homebrew as much as I should since I don't have a JTag'able system, but is there a new XMC in the works?
Post by: Setesh on January 15, 2010, 09:23:00 PM
Post by: sensi420 on January 15, 2010, 09:23:00 PM
Post by: Ranger72 on January 15, 2010, 09:46:00 PM
Post by: keine on January 15, 2010, 09:49:00 PM
Thanks.
This post has been edited by keine: Jan 16 2010, 05:55 AM
Post by: adamd34 on January 15, 2010, 09:50:00 PM
Post by: krizalid on January 15, 2010, 10:03:00 PM
QUOTE(keine @ Jan 15 2010, 11:49 PM) 
Could someone explain how to use this program, I don't follow, using an orig.bin and aXbr.bin
Thanks.
Not too sure, but I think the readme says to add these files to root of a USB (best way I think)
usb:\default.xex
usb:\media\ (folder that came with this release)
usb:\updflash.bin ( this is the full nand you'll be flashing. Make sure your kv and config are injected).
Run the app and watch it do the magic.
I'll test when I get home.
I'm too waiting for the Xell version. will defenetly help me on my technique of installing XBR from fresh.
Check post #8 here: http://forums.xbox-scene.com/index.php?sho...02428&st=0#
Cheers!!!
Post by: sensi420 on January 15, 2010, 10:07:00 PM
Launch FlasH360 via xexloader,viper360,etc
Follow on screen steps.
When u get to the flash part tell it to flash everything but keep kv and config original. it will flash XBreboot on ur nand and skip over ur kv and config block.
Follow the steps on screen to backout. let it countdown it will auto shut off ur console. After that unplug ur pwr supply for 15 seconds . reconnect and power up.
Post by: keine on January 15, 2010, 10:22:00 PM
Post by: Redline99 on January 15, 2010, 10:24:00 PM
Post by: krizalid on January 15, 2010, 10:24:00 PM
Post by: ddd1 on January 15, 2010, 10:24:00 PM
Post by: xkilla7680 on January 15, 2010, 10:26:00 PM
thank you
Post by: 8MM on January 15, 2010, 10:27:00 PM
Post by: xkilla7680 on January 15, 2010, 10:29:00 PM
Post by: keine on January 15, 2010, 10:35:00 PM
QUOTE(krizalid @ Jan 16 2010, 06:03 AM) 
Not too sure, but I think the readme says to add these files to root of a USB (best way I think)
usb:\default.xex
usb:\media\ (folder that came with this release)
usb:\updflash.bin ( this is the full nand you'll be flashing. Make sure your kv and config are injected).
Run the app and watch it do the magic.
I'll test when I get home.
I'm too waiting for the Xell version. will defenetly help me on my technique of installing XBR from fresh.
Check post #8 here: http://forums.xbox-s...o...02428&st=0#
Cheers!!!
Worked perfectly for me. 16 mB Falcon. Left config blocks in place from Xbre v1.
Thanks, Redline for this spectacular tool and all the dedicated hard work put into this tool and countless furthering of the scene.
Post by: ThE MaSTeR 3 on January 15, 2010, 10:52:00 PM
Post by: sensi420 on January 15, 2010, 10:55:00 PM
/XBOX 360/dashboards/Flash360/
Post by: xkilla7680 on January 15, 2010, 11:06:00 PM
thank you for that
Post by: Ranger72 on January 15, 2010, 11:10:00 PM
QUOTE(8MM @ Jan 16 2010, 12:27 AM)
This is for all the idiots that dremmel'd their cases with those dodgy cable mods
You have any idea how many people ask me to do that to their consoles? So glad there wont be a point in doing that anymore.
Post by: InsaneNutter on January 15, 2010, 11:15:00 PM
Now all we need is a "recovery mode" in-case of a bad flash like the PSP has when you hold right trigger down and power it, then we can all unsolder the LTP flasher wires for good!
Maybe something like that already exists?
Post by: aubrey_76 on January 15, 2010, 11:16:00 PM
QUOTE(sensi420 @ Jan 16 2010, 12:07 AM)
Download the Xbreboot.bin for ur console type. Rename it to updflash.bin and put it on root of USB.
Launch FlasH360 via xexloader,viper360,etc
Follow on screen steps.
When u get to the flash part tell it to flash everything but keep kv and config original. it will flash XBreboot on ur nand and skip over ur kv and config block.
Follow the steps on screen to backout. let it countdown it will auto shut off ur console. After that unplug ur pwr supply for 15 seconds . reconnect and power up. (IMG:style_emoticons/default/pop.gif)
Please forgive the me but I just want to make sure I understand what exactly this app is and how to use it. I paid someone to JTAG my Xbox 360 and I am hoping when newer releases come out in the future, that I can update it myself without having to ship it back to the person that did the JTAG for me.
Here is my interpretation of this app.......
This app is used if a newer version of XBReboot comes out and I will be able to update it from the current XBReboot Version that is on my Xbox 360 to a newer version by doing the following steps ....
1)My Xbox 360 has already been Jtagged and I have Xexloader installed
2)Insert USB Flash Drive into Xbox 360 with these files in the root (Xbreboot.bin for your console motherboard that has been downloaded from the "usual places" that is renamed to "updflash.bin", "Media" folder, and "Flash360.xex")
3)Power Xbox 360 on
4)Open "Xexloader" app in the games section and then open the "Flash360.xex" while inside of "Xexloader"
5)Options will come up asking if I want to keep the "kv" and "config" original and I select yes to flash everything but to keep those two original. (My question is will this show up like a game does in Xexloader or do I push "right" on my controller to bring up the USB files (the place where I can press "Y" to "copy", "move", "delete", etc and if I press "right" to bring up the files on the USB, what exactly do I do now?)
6)Follow the step by step on the screen to backout
7)A timer will count down and will turn the Xbox 360 console off automatically
8)After the Xbox 360 turns off, unplug the Power Cord for about 15 Seconds
9)Turn back on and enjoy
Sorry for being so detailed but I have spent a lot of money on getting a Brand New 2008 Holiday Pro Bundle and paying to have it JTAGed, so I dont want to do anything to mess it up and want to understand these programs
Post by: 8MM on January 15, 2010, 11:24:00 PM
QUOTE(aubrey_76 @ Jan 16 2010, 07:16 AM)
Please forgive the me but I just want to make sure I understand what exactly this app is and how to use it. I paid someone to JTAG my Xbox 360 and I am hoping when newer releases come out in the future, that I can update it myself without having to ship it back to the person that did the JTAG for me.
Here is my interpretation of this app.......
This app is used if a newer version of XBReboot comes out and I will be able to update it from the current XBReboot Version that is on my Xbox 360 to a newer version by doing the following steps ....
1)My Xbox 360 has already been Jtagged and I have Xexloader installed
2)Insert USB Flash Drive into Xbox 360 with these files in the root (Xbreboot.bin for your console motherboard that has been downloaded from the "usual places" that is renamed to "updflash.bin", "Media" folder, and "Flash360.xex")
3)Power Xbox 360 on
4)Open "Xexloader" app in the games section and then open the "Flash360.xex" while inside of "Xexloader"
5)Options will come up asking if I want to keep the "kv" and "config" original and I select yes to flash everything but to keep those two original. (My question is will this show up like a game does in Xexloader or do I push "right" on my controller to bring up the USB files (the place where I can press "Y" to "copy", "move", "delete", etc and if I press "right" to bring up the files on the USB, what exactly do I do now?)
6)Follow the step by step on the screen to backout
7)A timer will count down and will turn the Xbox 360 console off automatically
8)After the Xbox 360 turns off, unplug the Power Cord for about 15 Seconds
9)Turn back on and enjoy
Sorry for being so detailed but I have spent a lot of money on getting a Brand New 2008 Holiday Pro Bundle and paying to have it JTAGed, so I dont want to do anything to mess it up and want to understand these programs
The guy who did your box should have given you your original nand.bin. If not ask him.
Then no dramas stuffing flash up as you can always go back to orig. Above method seems fine too
Post by: KCO on January 15, 2010, 11:36:00 PM
video in youtube! video in youtube! video in youtube!
Post by: jeffrey92 on January 15, 2010, 11:42:00 PM
oh well this makes it all 10 easier now. thank you!
Post by: [Prophet] on January 15, 2010, 11:43:00 PM
QUOTE(8MM @ Jan 16 2010, 07:27 AM)
This is for all the idiots that dremmel'd their cases with those dodgy cable mods
This still won't help you recover from a bad flash. I've got one of those "dodgy" cable mods, and you wouldn't even know it's there unless you were told. Great application release but I'm still glad knowing I can hook it up any time to my pc without pulling the case apart.
Post by: KCO on January 15, 2010, 11:52:00 PM
Post by: NaughtyTester on January 16, 2010, 12:00:00 AM
Post by: redheretic on January 16, 2010, 12:09:00 AM
Post by: Pacotera on January 16, 2010, 12:31:00 AM
QUOTE(8MM @ Jan 16 2010, 06:27 AM)
This is for all the idiots that dremmel'd their cases with those dodgy cable mods
The mod helped a lot of people update when the new xbr release arrived without opening the box...
Post by: krizalid on January 16, 2010, 12:44:00 AM
QUOTE(redheretic @ Jan 16 2010, 02:09 AM)
can someone clarify... it's no longer necessary to patch in the KV? This flasher skips over it, right?
That's right, but remember; you have the option to choose this. I doesn't automaticly do it. Careful, I've seen ppl do mistake on software like this (not this one in particular).
Post by: jimbo james on January 16, 2010, 12:55:00 AM
Post by: xmugen360 on January 16, 2010, 12:55:00 AM
Post by: TS_ on January 16, 2010, 01:00:00 AM
Post by: hookemut25 on January 16, 2010, 01:08:00 AM
Post by: redheretic on January 16, 2010, 01:18:00 AM
QUOTE(hookemut25 @ Jan 16 2010, 02:08 AM)
Sorry for the newb question, but I have yet to JTAG my pre-7371 console and am guessing this is solely for people w/ the typical wires & soldering exploit already in place? Or am I missing something here? Really wanting to get homebrew going but have been out of the loop for the past few weeks and I'm not sure what the best way is now or if any more "user friendly" methods are on the horizon. Thanks for any input!
yep, it's only for people who are already hacked and need to update.
Post by: hookemut25 on January 16, 2010, 01:36:00 AM
QUOTE(redheretic @ Jan 16 2010, 02:18 AM)
yep, it's only for people who are already hacked and need to update.
Thanks!
Post by: XBoxgeek on January 16, 2010, 02:34:00 AM
Many thanks for a great app.
Post by: thesonandheir on January 16, 2010, 03:59:00 AM
QUOTE(TS_ @ Jan 16 2010, 08:00 AM)
I get an "e 71" error after flashing unmodified xenon xbr file. It only works if I remap bad blocks before using Flash360. Anyways, Great Program Thanks!!!
^
Make sure this bit is understood.
If you have XeXloader running, you can use Flash360 to DUMP the nand you have on there. Then use Degraded/BadBlockMover to shuffle your new version of XBR. You could use Flash360 to flash back then, AFTER the bad blocks have been remappped.
Redline99 is a legend.
Post by: dufc1983 on January 16, 2010, 04:25:00 AM
Post by: masterluke on January 16, 2010, 05:27:00 AM
Post by: niai on January 16, 2010, 05:50:00 AM
Post by: dpbmt on January 16, 2010, 06:03:00 AM
Post by: Vejita on January 16, 2010, 06:18:00 AM
Post by: WarriorSan on January 16, 2010, 06:31:00 AM
Post by: modslave on January 16, 2010, 06:37:00 AM
As cool as running Gentoo is this is just what I had hoped for.
Couldn't get my Xell to work through eject button and occasionally had 2 flashing red lights so used this to re-flash my 256 Jasper and all is well now - THANK YOU Redline your a legend!
Post by: dinzy on January 16, 2010, 07:02:00 AM
Post by: FalconLTD on January 16, 2010, 07:09:00 AM
Post by: whitey76 on January 16, 2010, 08:26:00 AM
Post by: belenos on January 16, 2010, 08:43:00 AM
QUOTE(dinzy @ Jan 16 2010, 09:02 AM)
great. Anyone want to buy a USB SPI flasher?
serious? how much?
Post by: utar on January 16, 2010, 09:05:00 AM
QUOTE(TS_ @ Jan 16 2010, 10:00 AM)
I get an "e 71" error after flashing unmodified xenon xbr file. It only works if I remap bad blocks before using Flash360. Anyways, Great Program Thanks!!!
Has anyone else who has bad blocks in their nand had any problems? I have 2 bad blocks myself and would prefer not to use the app if it may not work.
Utar
Post by: XBoxgeek on January 16, 2010, 09:50:00 AM
QUOTE(utar @ Jan 16 2010, 04:05 PM) 
Has anyone else who has bad blocks in their nand had any problems? I have 2 bad blocks myself and would prefer not to use the app if it may not work.
Utar
Someone has to be the first to test. You may as well step up to the plate and take one for the team
Good luck!
Post by: dufc1983 on January 16, 2010, 10:20:00 AM
Post by: Lush on January 16, 2010, 10:25:00 AM
Post by: omega232 on January 16, 2010, 11:10:00 AM
Post by: The Dude Z on January 16, 2010, 01:05:00 PM
QUOTE(adamd34 @ Jan 15 2010, 11:50 PM)
Does this uncripple the hdd install for banned xbox's by any chance? Sorry for the noob question.
No it does not because you can't run homebrew on the banned console.
What you want is here.
http://forums.xbox-s...o...697512&st=0
Post by: SoloStyl on January 16, 2010, 03:08:00 PM
How will this app handle BAD BLOCKS that are outta XBR3's range?
These blocks are bad on my nand.
DB0,DB1 are within XBR's range, so they need to be remapped.
I used NandPro20b to remap them to "7FFE and 7FFF".
Question, since I remapped those blocks to the end of the NAND, I can't Format my Onboard MU?
Or if I Format the onboard MU will i lose DB0,DB1 that are now on 7FFE,7FFF?
DB0
DB1
-------
1140 |
1148 |
1149 |
114A |
114B |
114C |
114D | <--- Can someone with a 512 Jasper confirm these blocks just FFFFFFFF's ? ?
114E |
114F |
2EF0 |
3148 |
47A0 |
5A20 |
5B40 |
--------
i ask 'cuz XBR3 sometime locks up on me, and i have to re-flash using LPC-H2148
Thanks in advance.
Post by: adamd34 on January 16, 2010, 06:44:00 PM
QUOTE(The Dude Z @ Jan 16 2010, 08:05 PM)
No it does not because you can't run homebrew on the banned console.
What you want is here.
http://forums.xbox-s...o...697512&st=0
Thanks, but what I'm waiting for is the day a software type patch/mod will let me install games to the hdd again rather than solder. Will that day ever come? Nobody seems to give a sh!t to answer that question over on that forum.
Post by: Redline99 on January 16, 2010, 07:11:00 PM
QUOTE(adamd34 @ Jan 16 2010, 05:44 PM)
Nobody seems to give a sh!t to answer that question over on that forum.
Do it yourself?
Post by: prodizo on January 16, 2010, 07:28:00 PM
2010 year of 360....what can i say....THANK YOU!!!!
M$
Post by: kickinazz on January 16, 2010, 09:20:00 PM
QUOTE(Ranger72 @ Jan 16 2010, 12:10 AM)
You have any idea how many people ask me to do that to their consoles? So glad there wont be a point in doing that anymore.
Dremmel the console? What does that even mean? I have done many 360's and never had to do that. I'm curious.
Post by: vake on January 17, 2010, 12:30:00 AM
Can't boot into xell either, give me 3 red lights.
Post by: hcaa on January 17, 2010, 12:35:00 AM
QUOTE(kickinazz @ Jan 16 2010, 08:20 PM)
Dremmel the console? What does that even mean? I have done many 360's and never had to do that. I'm curious.
A Dremel tool is a versatile rotary cutting tool, popular amongst the hardware hacking community.
Post by: XBoxgeek on January 17, 2010, 01:51:00 AM
QUOTE(vake @ Jan 17 2010, 07:30 AM)
Didn't work for me, now my xbox won't boot. No red lights, just the central green light.
Can't boot into xell either, give me 3 red lights.
Great bug report. Nice and clear with all the details listed of the steps you took. Just going to dust off my cyrstal ball so I can help you.
Post by: vake on January 17, 2010, 02:09:00 AM
QUOTE(XBoxgeek @ Jan 17 2010, 09:51 AM)
Great bug report. Nice and clear with all the details listed of the steps you took. Just going to dust off my cyrstal ball so I can help you.
Please be nice, I'm not asking for your help. I'll just use LPT to flash it again.
Post by: XBoxgeek on January 17, 2010, 02:16:00 AM
Even though you did not ask for help what did you expect from your post?. No details whatsoever other than "it did not work".If it truly is an issue with Flash360 (rather than user error) I am sure Redline would like as much detail as possible so he can try and resolve the issue so it does not happen to others. That's just my thinking on it.
Post by: masterluke on January 17, 2010, 03:03:00 AM
..from readme
really looking forward to seeing this.
Post by: TAz00 on January 17, 2010, 05:43:00 AM
Updated to XBR 3 in less than 10 secs =D ! (not counting nand build time ofc)
Post by: czosnek112 on January 17, 2010, 05:49:00 AM
P.S:Sorry for my horrible english.
Post by: gir on January 17, 2010, 10:24:00 AM
QUOTE(czosnek112 @ Jan 17 2010, 02:49 PM)
We can change the content of NAND directly from dashboard, right? So why just don't look for demo game, in which we can include Flash360? That would make 2.0.8XXX run homebrew.
P.S:Sorry for my horrible english.
Uhhh... what?
Post by: adamd34 on January 17, 2010, 12:30:00 PM
QUOTE(Redline99 @ Jan 17 2010, 02:11 AM)
Do it yourself?
Do what myself? I'm not soldering my xbox myself, I'll break it. I would guess a softmod would be available to fix it at some point, am I wrong?
Post by: Biaz on January 17, 2010, 01:34:00 PM
QUOTE(czosnek112 @ Jan 17 2010, 01:49 PM)
We can change the content of NAND directly from dashboard, right? So why just don't look for demo game, in which we can include Flash360? That would make 2.0.8XXX run homebrew.
P.S:Sorry for my horrible english.
Dude... seriously... you are a retard! It's not that simple. Please read up on the JTAG hack, simply changing the content of the NAND on a 2.0.8XXX console will only brick it.
Post by: melkia on January 17, 2010, 01:42:00 PM
Post by: cyanarnofsky on January 17, 2010, 03:26:00 PM
Post by: Morning Call on January 17, 2010, 04:51:00 PM
QUOTE(XBoxgeek @ Jan 17 2010, 04:16 AM)
Sorry dude just woke up. (IMG:style_emoticons/default/tongue.gif) Even though you did not ask for help what did you expect from your post?. No details whatsoever other than "it did not work".
If it truly is an issue with Flash360 (rather than user error) I am sure Redline would like as much detail as possible so he can try and resolve the issue so it does not happen to others. That's just my thinking on it.
i'm putting it on user error. most all issues are user error lately with the 360 being hacked and people not able to troubleshoot stuff themselves.
Post by: irishwhip on January 17, 2010, 10:22:00 PM
I had to solder the cable back and flash with nandpro again.
these are the blocks, if it helps
Post by: czosnek112 on January 18, 2010, 07:03:00 AM
QUOTE(Biaz @ Jan 17 2010, 09:34 PM)
Dude... seriously... you are a retard! It's not that simple. Please read up on the JTAG hack, simply changing the content of the NAND on a 2.0.8XXX console will only brick it.
That wasn't cool, I bet you haven't seen a retarded person. I thought that only in Poland you can be offended just-because. I was wrong. I'll just pray for you and your culture.
Post by: Stripey_Horse on January 18, 2010, 07:26:00 AM
QUOTE(czosnek112 @ Jan 18 2010, 02:03 PM)
That wasn't cool, I bet you haven't seen a retarded person. I thought that only in Poland you can be offended just-because. I was wrong. I'll just pray for you and your culture.
PLEASE KEEP ON TOPIC...
blaz was right. Isnt this a development forum...
Worked great here..
one point.. why lately in the scene the no open source standpoint.. xedev team have given up the network secret.. why not share?
btw.. i do understand ppl will surely try to profit from anything.. maybe a custom xbox dev lib that flashes up a "if u paid u got ripped off msg" aka wii
my 2cents
Post by: Redline99 on January 18, 2010, 12:20:00 PM
QUOTE(Stripey_Horse @ Jan 18 2010, 06:26 AM)
one point.. why lately in the scene the no open source standpoint.. xedev team have given up the network secret.. why not share?
Because my code is Sh*t and I don't feel like showing everyone. If you have a problem with that, make your own.
Post by: darylz on February 02, 2020, 10:52:00 PM
This post has been edited by darylz: Yesterday, 06:52 AM
Post by: harleywastaken on January 18, 2010, 11:56:00 PM
QUOTE(darylz @ Jan 18 2010, 09:52 PM)
i have only kv.bin written NOT config.bin is there any problem with this,Also do i select keep original when i flash with Flash360 v1.0,i ask this for future upgrade my 360 works perfectly with xbr right now,Thank u for ur help
i went back to my original nand and extracted the kv, injected it into the stock XBR image, then chose not to use the current kv/config when flashing with flash360. i had a zephyr that throws random e79s with kv and config, works just fine with kv only.
Post by: 8MM on January 19, 2010, 03:37:00 AM
QUOTE(Redline99 @ Jan 18 2010, 08:20 PM)
Because my code is Sh*t and I don't feel like showing everyone. If you have a problem with that, make your own.
What an honest bloke, but im sure your code is better than mine!
Post by: bLiGhTy on January 24, 2010, 05:52:00 AM
bLiGhTy.
Post by: sdfw34t on January 24, 2010, 01:57:00 PM
I have a fully operational 256 and during the full 256MB dump of the nand I got these errors:
error reading block 4c status 218
error reading block 6a status 208
error reading block 1b0 status 210
error reading block 1b1 status210
error reading block 24b status 250
error reading block 7ca status 250
And when I dumped the 64MB part I got the same errors except the last two, because they were "out of range".
One might say I just have lots of bad blocks, but I know I only have one (B48) in the 64MB range, and it doesn't even show that one in the error report!!!
What are all these errors?
Post by: XmemphistoX on January 26, 2010, 02:11:00 PM
I am buying a jtagged falcon from someone. Is this how I am supposed to install XBR from scratch? Do I need to inject a kv and config file?
1)install xexloader from cd/dvd
2)download xbreboot.bin and flash360 v1
3)rename xbreboot.bin to XXXX.bin (forgot the name will look it up later)
4)load flash360 from xexloader
5)flash nand
It'll ask if I want to keep my old KV and Config which I will say yes to.
What is this talk about moving bad nand blocks? How do I know which blocks to move and where if I run across these problems?
This post has been edited by XmemphistoX: Jan 26 2010, 10:23 PM
Post by: cardboardbox on February 11, 2010, 11:40:00 PM
Am I on the right track?
Post by: xxpittbullxx on February 12, 2010, 12:11:00 AM
QUOTE(cardboardbox @ Feb 12 2010, 01:40 AM)
When I push the eject button to turn on my 360 I get Xell. Power button boots into XBR. Can I use Flash360 to overwrite Xell with Xellous? I was thinking I'd rename xell-2f.bin to updflash.bin and put it on a usb drive. Once in Flash360 would I select option A? The LPT wires have been removed and the case reassembled so I'm not really looking forward to going back to the lpt method.
Am I on the right track?
Rename xell-2f.bin to updslot0.bin and place in the root of your USB drive or stick
In flash360 press button B (write update area of rebooter)
Then button A (write updslot0.bin (xell) )
hope this help
Post by: cardboardbox on February 12, 2010, 08:56:00 AM
QUOTE(xxpittbullxx @ Feb 12 2010, 01:11 AM)
Rename xell-2f.bin to updslot0.bin and place in the root of your USB drive or stick
In flash360 press button B (write update area of rebooter)
Then button A (write updslot0.bin (xell) )
hope this help
lol, cute dog!
Just to make sure, doing this wont overwrite or do anything else to XBR right?
Post by: jeffrey92 on February 24, 2010, 10:45:00 PM
I want to put a banned kv into my nand and just use that since theres no point in having an unbanned kv since i wont be connecting to live
Post by: doveman007 on March 02, 2010, 04:28:00 PM
I just need to flash an updpatch.bin so I'd like to know what this other step does before I go ahead.
Post by: rulnip on March 15, 2010, 02:38:00 PM
I dumped the Nand that I had flashed with LPT before I used this. Then I flashed with this software from the xbox and then dumped the nand again to compare the 2 just to see if my Nand flash was the issues I been having the last few weeks since I flashed it.
I compared the before (from lpt) and after (from flash360) nand and there were many differences. So it was no wonder I was having issues with my Xbox the last few weeks. I bet it was not flashed right before.
Post by: holyjewsus on February 03, 2020, 03:20:00 PM
I realize we'd have to wait until the new xbr comes out.
I just mean, what files would we need to rename and what options would we use?
Post by: Piratesmustperish on May 13, 2010, 07:10:00 AM
(IMG:http://www.xbox360xperts.com/tutorials/flash360_upd/flash_upd13.jpg)
here is my original post outlining my issue:
xbox-scene post
can anyone give me advice?