Post by: radoman on October 02, 2011, 07:08:00 PM
So ap25 sectors come from a DAE.bin?
eta: Thanks redline99
Post by: Redline99 on October 02, 2011, 07:14:00 PM
Burning XGD3 is not supported yet in xbc, this release is for ripping only.
Use imgburn from outside of xbc for now.
XGD3 stealth checks not supported either, use abgx360 when available.
Post by: eddy315west on October 02, 2011, 07:22:00 PM
Post by: shloader on October 02, 2011, 07:22:00 PM
Post by: eddy315west on October 02, 2011, 08:18:00 PM
load xbc i get this
AP25 cannot locate dae.bin file
Getting media info [M]
Media Type: Not Present
and i have my original gow3 disc in the drive . any help would be apreciated . thanks
Post by: chorizo1 on October 02, 2011, 09:15:00 PM
QUOTE(eddy315west @ Oct 2 2011, 09:18 PM) 
can you point me to a guide how to flash a liteon 74850 drive to this 0800v3 firmware
Just put the liteon ready as if you were gonna flash it. set the 800 firmware as target firmware then write. It will tell you about not having key, or spoof etc. ignore and just flash.
Post by: shai12 on October 02, 2011, 09:42:00 PM
QUOTE(ArcticWolf @ Oct 3 2011, 01:04 PM)
My understanding is that Gears of War 3 uses the XGD3 format.
If Xbox Backup Creator 2.9 supports XGD3, then we should be
able to copy GoW3 and create an ISO image file. Correct?
And then use ImgBurn to burn the DVD?
I have an old Xbox 360 with a Hitachi drive flashed with GaryOPA 2.3.
I have an old Samsung SH-D162C.
Would I be able to copy and play Gears of War 3?
Any advice/suggestion would be appreciated.
Thank in advance.
You will need a BenQ or a phat liteon using the new IXtreme 3.0 0800 firmware to rip it
Post by: DodgeM4s on October 02, 2011, 10:58:00 PM
QUOTE
*** NOTE *** This build of XBC does not support older Xtreme ripping firmwares (Kreon drives are still supported though). Use abgx360 at http://abgx360.net for more thorough Stealth Checking
So does this mean my old Samsung SH-D163B with new xbc can be used for XGD3?
Post by: ArcticWolf on October 02, 2011, 11:11:00 PM
QUOTE(shai12 @ Oct 3 2011, 04:42 AM)
You will need a BenQ or a phat liteon using the new IXtreme 3.0 0800 firmware to rip it
Shai12, thanks for your reply.
If I were to obtain a backup copy of Gears of War 3 from someone else,
then would I be able to play it on my old Xbox 360?
Post by: Aldanga on October 02, 2011, 11:39:00 PM
QUOTE(DodgeM4s @ Oct 2 2011, 10:58 PM)
So does this mean my old Samsung SH-D163B with new xbc can be used for XGD3?
No. Only 0800 v3 support XGD3.
Post by: BigSteel on October 03, 2011, 12:32:00 AM
QUOTE(Aldanga @ Oct 2 2011, 11:39 PM)
No. Only 0800 v3 support XGD3.
Can you use a Kreon drive and then run it thru ABGX to patch it properly, or is Kreon right out the window for XGD3?
Post by: Aldanga on October 03, 2011, 12:36:00 AM
Post by: Redline99 on October 03, 2011, 12:53:00 AM
Post by: Bad_Ad on October 03, 2011, 03:41:00 AM
now they are using the same method?
http://forums.xbox-s...o...30970&st=15
Same as there was "no way to unlock slim liteon's" - buy our PCB" and then the russian group released an unlock?
All just seems like public propaganda
Post by: OggyUK on October 03, 2011, 03:50:00 AM
Redline uses each dae.bin for the ap2.5 challenge set for that dashboard. The actual disc generates the response.
Then it records the relevent responses.
They were using dae.bin's target and adding jitter.
Post by: HOMiE7 on October 03, 2011, 04:35:00 AM
QUOTE(Redline99 @ Oct 3 2011, 10:53 AM)
Kreon, Samsung and Hitachi are still supported by the XBC but, they cannot properly rip XGD3. They are for XGD2 only if even then they don't support AP25. Eventually those drive will be completely obsolete.
Hitachi can rip games? Didn't saw 0800 firmware for these drives ever... Where I can get it? Just interesting.
BTW, where I can get DAE.bin for latest dashboard (and for older dashboards) though?
Post by: OggyUK on October 03, 2011, 04:45:00 AM
Post by: Bad_Ad on October 03, 2011, 07:03:00 AM
QUOTE(OggyUK @ Oct 3 2011, 10:50 AM)
No,
Redline uses each dae.bin for the ap2.5 challenge set for that dashboard. The actual disc generates the response.
Then it records the relevent responses.
They were using dae.bin's target and adding jitter.
Oh, I see. Its using the DAE.bin during the reading phase - so the original disc will generate the responses. Clever and makes sense
Cheers for the clarification.
Post by: FrankDux on October 03, 2011, 09:11:00 AM
example .. replace the 80mb outtro credits video with the 1mb Loading video instead. do that to a few videos or just lower the res on a few and we can then make the entire iso fit normally on a DL disc
Just athought.. anyone else think this will work, im downloading the tools and gonna try it in see what happens
Post by: EZYESS57 on October 03, 2011, 09:38:00 AM
Are previous (currently unsused) responses being burned to the disc or is it strictly the current responses?
Post by: joe90 on October 03, 2011, 10:31:00 AM
Cheers
Post by: saftigger on October 03, 2011, 02:23:00 PM
Post by: gutch93 on October 03, 2011, 03:09:00 PM
QUOTE(joe90 @ Oct 3 2011, 12:31 PM)
So.. my Keron drive in my PC (oem looking one) is now useless, I should replace with a spare drive from one of a number of broken xbox I have lying around?
Cheers
Great question joe90.. I have a phat BenQ in my closet.. Can I use this drive to rip XGD3?
Thanks,
Jeff.
Post by: DeadlyRox on October 03, 2011, 04:23:00 PM
http://imageshack.us...2/errorxbc2.png
tried 5 times and same error :S
I, used Via, My Hp Sata Port, and Now the Hp with Sata that i always use to flash every drive.
This is with a LiteOn, i will flash a Benq now with 0800 v3 to see what happen.
Thx
Post by: Redline99 on October 03, 2011, 05:00:00 PM
QUOTE(DeadlyRox @ Oct 3 2011, 02:23 PM)
Hello there Redline can you explain why i always get this error ?
Thx
Thx
No I can't directly, check for scratches or fingerprints on the outter edge of the disc.
Cleaning the disc will help sometimes.
Post by: ddxcb on October 03, 2011, 06:57:00 PM
XGD3 Read fine except the fact that security is not in place.
But what are offline systems are for xD
Post by: ProphetOfPain on October 04, 2011, 11:41:00 AM
Post by: Julets on October 04, 2011, 05:23:00 PM
Post by: Redline99 on October 04, 2011, 07:13:00 PM
Post by: neildee250 on October 04, 2011, 07:27:00 PM
Post by: fayd on October 04, 2011, 09:33:00 PM
I tried to run or install xbc 2.9 but i get a error wondering if anybody else has this same problem.
I get error Run-time error '339':
component 'MSCOMCTL.OCX' or one of its dependencies not correctly registered: a file is missing or invalid
I do not have a 800 drive on my computer yet. have to get a benq drive. Thought I would take a look at it and see what is different.
Post by: Redline99 on October 05, 2011, 02:23:00 AM
If your getting an error in windows 7 (or other os) with mscomctl.ocx which is stopping backup creator from running then try this
Get the mscomctl.ocx whether zip/rar form or whatever, extract to( C:\WINDOWS\SYSTEM directory. ) LEFT CLICK ON "Command Prompt" and choose "RUN AS ADMINISTRATOR"
this is important, RUN AS ADMINISTRATOR ok got that good, then use "CD C:\Windows\system"
NOT \system32
Then "regsvr32 mscomctl.ocx"
Running XBC on 64-bit windows 7 its different again you need to put MSCOMCTL.OCX into C:\Windows\SysWOW64 folder.
Run command prompt as Administrator and ether type or copy and paste this in >>> Regsvr32 c:\windows\SysWOW64\MSCOMCTL.OCX if anyone needs it > Here.
http://www.majorgeek...es/mscomctl.zip
Post by: Premoz on October 05, 2011, 04:33:00 AM
Do I need to change the layerbreak in the .DVD file?
Any ideas? Trying to burn a backup of GoW3 that I created myself.
Cheers,
Post by: uN0pEn on October 05, 2011, 08:40:00 AM
Post by: Premoz on October 05, 2011, 05:17:00 PM
Thanks very much for your reply, I followed the tutorial to rip the game listed here:
http://team-xecuter....ead.php?t=61646
Then for burning the game I followed this:
http://nickthegr33k.eu/XGD3burn.pdf
after clicking Write until end of disc (Truncate) I get the error I posted above, unsure what i'm doing wrong.
Post by: playerman on October 08, 2011, 03:00:00 AM
QUOTE(Redline99 @ Oct 5 2011, 09:23 AM)
Im stealing this post from someone, I don't remember who. <Thanks Someone>
If your getting an error in windows 7 (or other os) with mscomctl.ocx which is stopping backup creator from running then try this
Get the mscomctl.ocx whether zip/rar form or whatever, extract to( C:\WINDOWS\SYSTEM directory. ) LEFT CLICK ON "Command Prompt" and choose "RUN AS ADMINISTRATOR"
this is important, RUN AS ADMINISTRATOR ok got that good, then use "CD C:\Windows\system"
NOT \system32
Then "regsvr32 mscomctl.ocx"
Running XBC on 64-bit windows 7 its different again you need to put MSCOMCTL.OCX into C:\Windows\SysWOW64 folder.
Run command prompt as Administrator and ether type or copy and paste this in >>> Regsvr32 c:\windows\SysWOW64\MSCOMCTL.OCX if anyone needs it > Here.
http://www.majorgeek...es/mscomctl.zip
Just install it from here and you are done(any system)
http://www.javacools...ngfilesetup.exe
Post by: DodgeM4s on October 14, 2011, 04:54:00 AM
QUOTE(DeadlyRox @ Oct 4 2011, 12:17 AM)
Mmm thx, actually is no the disc itself, i flashed a Benq right now and it passed the 50% barrier, is actually in 89%. So Xbc is working fine, the disc if fine, the computer is fine then is something with the Liteon drive
, i will reflash it to test it again.Thx for replying
He's not kidding about dirt. I was trying for ages to to do GOW3, it kept throwing errors about wanting to fill zero's. I checked the disk heaps of times and it look fine until I had another look and found the most tinniest smudge. I thought nah its still going to error on me. Tried it again and not one fault
Imagine if these were Blue Ray...
Post by: nightmareZz on October 14, 2011, 09:21:00 AM
Xbox Backup Creator v2.9 Build:0345 By Redline99 Rage disk 1
Found ODD: PLDS DG-16D2S 7485 at [E]
Additional Info: LITEON-AP25V3.0
Nero API is not available
ImgBurn 2.5.5.0 is available
ImgBurn - The Ultimate Image Burner! by LIGHTNING UK!
AP25 loading dae.bin file
AP25 dae.bin MCRT Version: 12
AP25 dae.bin MCRT Count: 50
AP25 dae.bin MCRT Flags: 0x0000
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 49.0 MB (51,329,024 bytes)
Starting read process...
Target Xbox version = Xbox360
Space Available on Drive D:\ 134 GB (143,766,069,248 bytes)
Creating SplitVid backup image [E]
Reading Volume Descriptor
AP25 D.ID 0C3DF524599094E6CB87ECC8F87A804E found at entry 48
Opening image output file
Reading Video Layer0
Opening image output file
Reading Video Layer1
Adding Filler Layer0
Processing AP25 Sector
Processing PFI Sector
Processing DMI Sector
Processing Security Sector
======================================
<-- Security Sector Details -->
Source Drive: DG-16D2S
--------------------------------------
Game Partition PFI
E10F31100003410000FCAEFF00238E0F
--------------------------------------
Xbox Version: 02
--------------------------------------
Xbox XGD3 Flag: 06
--------------------------------------
TimeStamp of Authoring: 8/22/2011
TimeStamp of Mastering: 9/1/2011 11:42:43 PM
--------------------------------------
Media ID
4DB9E343E9B74C8ECD70A7D1-0A5883E2
--------------------------------------
CPR_MAI Key
C4E0B6D5
--------------------------------------
RT CID MOD DATA Drive Response
-- -- -- ------------- -----------------
01 BC 00 033100 0340FF 23717D6A BF10E3AD
03 F7 00 244530 24552F F07ABDBC F119E144
01 8A 00 DBBAD0 DBCACF 22E0C9FF 483470D1
03 4D 00 FCAF00 FCBEFF ABC7F1BD 59764409
05 0A 00 033100 033E7F AB1C92CE AEE8A198
07 A0 00 244530 2452AF 0F6A765C C9701ED2
05 DE 00 DBBAD0 DBC84F F49D61EC C65F47C7
07 7B 00 FCAF00 FCBC7F 247B1723 CAEA6BD2
E0 40 00 056DFF CE2CD5 82E74C79 B76ACF92
------------------------------------------
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 8.07 GB (8,662,351,872 bytes)
Read failed
Operation cancelled!
Getting media info [E]
Media Type: Not Present
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 49.0 MB (51,329,024 bytes)
Starting read process...
Target Xbox version = Xbox360
Space Available on Drive D:\ 134 GB (143,766,126,592 bytes)
Creating SplitVid backup image [E]
Reading Volume Descriptor
AP25 D.ID 0C3DF524599094E6CB87ECC8F87A804E found at entry 48
Opening image output file
Reading Video Layer0
Opening image output file
Reading Video Layer1
Adding Filler Layer0
Processing AP25 Sector
Processing PFI Sector
Processing DMI Sector
Processing Security Sector
======================================
<-- Security Sector Details -->
Source Drive: DG-16D2S
--------------------------------------
Game Partition PFI
E10F31100003410000FCAEFF00238E0F
--------------------------------------
Xbox Version: 02
--------------------------------------
Xbox XGD3 Flag: 06
--------------------------------------
TimeStamp of Authoring: 8/22/2011
TimeStamp of Mastering: 9/1/2011 11:42:43 PM
--------------------------------------
Media ID
4DB9E343E9B74C8ECD70A7D1-0A5883E2
--------------------------------------
CPR_MAI Key
C4E0B6D5
--------------------------------------
RT CID MOD DATA Drive Response
-- -- -- ------------- -----------------
01 BC 00 033100 0340FF 23717D6A BF10E3AD
03 F7 00 244530 24552F F07ABDBC F119E144
01 8A 00 DBBAD0 DBCACF 22E0C9FF 483470D1
03 4D 00 FCAF00 FCBEFF ABC7F1BD 59764409
05 0A 00 033100 033E7F AB1C92CE AEE8A198
07 A0 00 244530 2452AF 0F6A765C C9701ED2
05 DE 00 DBBAD0 DBC84F F49D61EC C65F47C7
07 7B 00 FCAF00 FCBC7F 247B1723 CAEA6BD2
E0 40 00 056DFF CE2CD5 82E74C79 B76ACF92
------------------------------------------
Unlocking Game Partition
Reading XDVDFS File system
Reading Volume Descriptor
Reading Volume Descriptor
Sorting Section Map
Optimizing Section Map
Reading Game Partition
Setting read speed to 2x
Setting read speed to 5x
Adding Filler Layer1
Appending Video Layer1
Creating Layer Break File
LayerBreak file saved as: "Rage disk 1 iso.dvd"
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 8.07 GB (8,662,351,872 bytes)
Read completed in 01:00:03
Post by: Surazal on October 15, 2011, 12:16:00 PM
Any chance for an updated standalone Xbox Image Browser?
Reason I ask is I've always been fond of the standalone XIB but naturally it doesn't support XD3.
I notice that the XIB in the new XBC extracts faster than the standalone version.
Problems with the integrated version:
1. On Windows 7 the taskbar item for the XBC integrated Image Browser sometimes disappears from the taskbar.
2. XBC is single instance which means it is only possible to have the integrated Image Browser running once.
Thanks again for your efforts.
Post by: OggyUK on October 16, 2011, 03:05:00 AM
Post by: hawkbug on November 11, 2011, 11:25:00 PM
QUOTE(uncledrax @ Oct 15 2011, 08:32 AM)
Hey Guys,
Are backups of Xbox1 games still supported? When i try to backup one on my Lite-on with 0800 v3 firmware it get the following;
Starting read process...
Target Xbox version = Xbox One
Space Available on Drive E:\ 782 GB (839,744,458,752 bytes)
Creating SplitVid backup image [G]
Reading Volume Descriptor
Application Error in: CreateBurnReadyISO_SplitVid
13 Type mismatch
Getting media info [G]
Media Type: DVD-ROM
Bytes Used: 6.54 GB (7,027,228,672 bytes)
Read failed
Any ideas?
Thanks
I have the same problem uncledrax. If you find a solution, let a brutha know
For now, I'm unable to back up Xbox 1 games. Not a huge deal, but a bummer for sure.