xboxscene.org forums

Xbox360 Forums => Xbox360 Software Forums => PC Tools and Utilities (Xbox 360 related) => Topic started by: Xbox-Scene on April 09, 2011, 11:38:00 AM

Title: 360 Lizard: Gecko 1.07 and TBX B016, to support C4E 9504 LT release
Post by: Xbox-Scene on April 09, 2011, 11:38:00 AM

360 Lizard: Gecko 1.07 and TBX B016, to support C4E 9504 LT release Posted by XanTium | April 9 13:38 EST | News Category: Xbox360

From 360lizard.com: Quote We are releasing an update to Gecko OS (1.07) and Lizard Toolbox (B016) to support the C4E 9504 Slim LT release. You can get the Toolbox on our download page and the Gecko update using the Lizard FW Updater application. In order to be able to generate the CFW files it is MANDATORY to update your Fileset Templates (those file need to be placed in the "CFW_Templates" folder). Visit the Official Fileset blog to download them as they are not included with the Lizard Toolbox Software Releases. Please NOTE in order to successfully flash your 9504 Drive you need to go to the "Read Key from Slim Drive" option under Slim Liteon Menu on lizard, this will dump a full serial and key area. ** IMPORTANT !!: If you did a dump already with previous Gecko Releases (for example to change the drive for a phat model) you need to re-dump the original drive using the latest Gecko OS (1.07) as this new dump required portions of the firmware not included in previous releases (Key area and full serials). The Procedure to Flash your drive is as follows (We are doing a proper tutorial) a) Get the Key using the Read Key from Slim Drive option on the Slim Liteon Menu on Lizard (this will generate all required files and will send to PC) b) On the Lizard Toolbox application go to CFW Generator tab and then to the Easy view and load the source_dummy.bin file just created. c) Select the type of firmware to make (original or CFW) and Save As. d) On Lizard enter on MTK icon follow onscreen instructions e) Go to Write option on Lizard and when prompted send the Generated File (default Liteon_CFW.bin) in the Toolbox. Currently the Lizard toolbox will not allow you to open the generated firmware on the Advanced Tab, only on the easy view tab, the main reason is because Advanced tab is mainly for spoofing and 9504 release don't allow spoofing. We will work on a fix on the couple of days to enable opening the file on the Advanced tab; but for now it’s not really needed. Also we have got reports of people that have Drive’s labeled as 9504 but that are reported as 0225, well this is a known issue and it just happen that are 0225 drives that were not re-labeled by the factory, it’s not a TBX, nor Lizard nor Jungle flasher problem. Also we had a support request from a guy who just did his first bad flash (he accidentally lost power on the drive while flashing). Since the flashing had gotten to the 2nd bank the drive was no long detected nor being able to enter on MTK mode again (he used all tools available, dosflash, JF and lizard). So we just did a Quick Tutorial for Recovery from a bad flash using our friend The Scorpion. It’s not required every time, its similar to Benq Brick and is only required when the flash pass certain stage of flashing and it can happen with any flashing tool. Last but not least, we want to express many thanks to c4e for his fair play of this release and keeping his word about not locking the release to any specific hardware, that means allot to us and all our customers. Full credit on the Slim LT firmware goes to c4e. Official Site: http://www.360lizard.com

Title: 360 Lizard: Gecko 1.07 and TBX B016, to support C4E 9504 LT release
Post by: carranzafp on April 09, 2011, 03:17:00 PM

Wrong Video shown on the note, proper is this:

http://youtu.be/El8NBTMyTQs

Title: 360 Lizard: Gecko 1.07 and TBX B016, to support C4E 9504 LT release
Post by: Darkflame on April 09, 2011, 03:33:00 PM

Something to ponder.......

I own both devices and I can say that using jungle flasher there's a point at least on my 9504 where it goes into this authorized portion and the JF will sit there for about a minute doing something until eventually everything checks out.

However, when I flash the drive using the lizard you just get the usual writing, verifying, all is well deal.

I wonder if both teams are using the exact same approach to get these firmwares on to the drives and if not if there is a possibility of MS detecting one or the other's approach.

On JF you can see what's being done, secret keys, erasing and writing sectors and authorizing etc.

On lizard it's just MTK, rip, patch, MTK, write, verify, checksum.

...............just a thought. (IMG:style_emoticons/default/dry.gif)

Title: 360 Lizard: Gecko 1.07 and TBX B016, to support C4E 9504 LT release
Post by: letsmod on April 09, 2011, 03:47:00 PM

(IMG:http://www.360lizard.com/website/images/warning.jpg)

Title: 360 Lizard: Gecko 1.07 and TBX B016, to support C4E 9504 LT release
Post by: Exobex on April 10, 2011, 04:50:00 AM

WARNING - ALERT
In order to flash your Slim 9504 CFW MAKE
SURE YOU RE-DUMP THE DRIVE USING
GECKO 1.07 AND TBX 1.016

People using old slim key dumps then creating
the CFW file with JF and writing his original will
lose important data and game play will not work
EVER

Please re-dump your Slim Drive using
Gecko 1.07 and TBX 1.016
before flashing your drive

--------------------------------
As letsmod says, but in text format so search engines can find it. Useful info!