Post by: OggyUK on February 20, 2011, 07:00:00 PM
PhatKey Suport.
http://www.junglefla.../downloads.html
JungleFlasher 0.1.79(208S)
========================================
PhatKey support
----------------------------------------
Support for Lite-On key extraction, Using Pógó Mo Thóin DIY probe or Xecuter Probe III.
Thanks to Maximus & Co for the un-released original Concept.
Guide: http://bit.ly/hdtHsa
Hitachi Support
----------------------------------------
Gui changes in Hitachi::Drive area.
[Refresh] in Winapi no longer scans for new hardware
[Scan] added to scan for new hardware separately
[Remove] removed, but added to context menu for convienence
JF will accept system message about new drives added, JF will auto refresh list for new ODD.
x360USB Support
----------------------------------------
Initial support for x360USB added - More to follow at release
LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct
file is included and should be copied to JF folder if needed.
PortIO and other DLL's
----------------------------------------
We followed schtroms lead and embbed the Portio .sys files to load from temp folder. Other required
DLL's have been embedded also. For those using Test signed drivers in x64, PortIO load function
checks JF folder for existing files and uses those if present.
Post by: k0mpresd on February 20, 2011, 08:01:00 PM
)
Post by: syntaxerror329 on February 20, 2011, 09:42:00 PM
Don't miss the new install step. "LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct file is included and should be copied to JF folder if needed."
So if you are getting the error message "This application has failed to start because libusb0.dll was not found. Re-installing the application may fix this problem."
You just need to copy that dll from the libusb folder and put it in the same folder as the .exe
Post by: pigbait on February 20, 2011, 11:29:00 PM
QUOTE(syntaxerror329 @ Feb 20 2011, 10:42 PM) 
Works great for me! Thanks
Don't miss the new install step. "LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct file is included and should be copied to JF folder if needed."
So if you are getting the error message "This application has failed to start because libusb0.dll was not found. Re-installing the application may fix this problem."
You just need to copy that dll from the libusb folder and put it in the same folder as the .exe
Thanks Boxxdr, can't wait to see what your DIY scorpion looks like (IMG:style_emoticons/default/wink.gif)
Post by: tomgreen99200 on February 21, 2011, 01:52:00 AM
Post by: [Imported]Intruder on February 21, 2011, 02:14:00 AM
QUOTE(OggyUK @ Feb 21 2011, 03:00 AM) 
JungleFlasher v0.1.79b (208S)
PhatKey Suport.
http://www.junglefla.../downloads.html
JungleFlasher 0.1.79(208S)
========================================
PhatKey support
----------------------------------------
Support for Lite-On key extraction, Using Pógó Mo Thóin DIY probe or Xecuter Probe III.
Thanks to Maximus & Co for the un-released original Concept.
Guide: http://bit.ly/hdtHsa
Hitachi Support
----------------------------------------
Gui changes in Hitachi::Drive area.
[Refresh] in Winapi no longer scans for new hardware
[Scan] added to scan for new hardware separately
[Remove] removed, but added to context menu for convienence
JF will accept system message about new drives added, JF will auto refresh list for new ODD.
x360USB Support
----------------------------------------
Initial support for x360USB added - More to follow at release
LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct
file is included and should be copied to JF folder if needed.
PortIO and other DLL's
----------------------------------------
We followed schtroms lead and embbed the Portio .sys files to load from temp folder. Other required
DLL's have been embedded also. For those using Test signed drivers in x64, PortIO load function
checks JF folder for existing files and uses those if present.
Excellent work guys, unlike maximus this shit is free and not yet another expensive addon.... Ignore the idots...
Post by: courier on February 21, 2011, 03:13:00 AM
QUOTE
Intruder' date='Feb 21 2011, 10:14 AM' post='4781775']
Excellent work guys, unlike maximus this shit is free and not yet another expensive addon.... Ignore the idots...
Excellent work guys, unlike maximus this shit is free and not yet another expensive addon.... Ignore the idots...
agree whit you The world is full of idiots !!!!
Post by: JackintheXbox on February 21, 2011, 04:19:00 AM
This post has been edited by JackintheXbox: Feb 21 2011, 12:23 PM
Post by: OggyUK on February 21, 2011, 04:23:00 AM
This is JungleFlasher, it's free, has always been free and will always be free.
Post by: JackintheXbox on February 21, 2011, 04:33:00 AM
Will the jungleflasher work with lizard in the future?
Post by: LittleBH on February 21, 2011, 04:36:00 AM
QUOTE(JackintheXbox @ Feb 21 2011, 11:33 AM)
Thats nice.
Will the jungleflasher work with lizard in the future?
why would it need to? They keep claiming it's standalone
Post by: courier on February 21, 2011, 04:39:00 AM
QUOTE(JackintheXbox @ Feb 21 2011, 12:33 PM)
Thats nice.
Will the jungleflasher work with lizard in the future?
Naaaa if you want to use lizard and JF your pc go 4ever in loop,lizard is more slowing to works whit JF
Post by: JackintheXbox on February 21, 2011, 04:39:00 AM
QUOTE(LittleBH @ Feb 21 2011, 09:36 AM)
why would it need to? They keep claiming it's standalone
Nice dodge.
Hopefuly it will be yes.
But in the meentime. I guess people who love JF are going to have to switch.
Post by: mr-crix03 on February 21, 2011, 04:41:00 AM
Post by: [Imported]Intruder on February 21, 2011, 04:57:00 AM
QUOTE(JackintheXbox @ Feb 21 2011, 12:39 PM)
Nice dodge.
Hopefuly it will be yes.
But in the meentime. I guess people who love JF are going to have to switch.
How is it a dodge? They have stood on a stool and said its a STANDALONE which of course you pay for.....
Post by: LittleBH on February 21, 2011, 05:14:00 AM
QUOTE(JackintheXbox @ Feb 21 2011, 11:39 AM)
Nice dodge.
Hopefuly it will be yes.
But in the meentime. I guess people who love JF are going to have to switch.
Why would you switch from JF?
Currently the Lizard doesnt even do all pre-slim drives!
And with PMT support added, JF does what the scorpion does - for free!
If you are talking standalone - ask oggy how his netbook is doing!
Post by: [Imported]Intruder on February 21, 2011, 05:29:00 AM
QUOTE(LittleBH @ Feb 21 2011, 01:14 PM)
Why would you switch from JF?
Currently the Lizard doesnt even do all pre-slim drives!
And with PMT support added, JF does what the scorpion does - for free!
If you are talking standalone - ask oggy how his netbook is doing!
Because he is a fanboy... And like others is just interested it flaming
Post by: JackintheXbox on February 21, 2011, 05:36:00 AM
Post by: [Imported]Intruder on February 21, 2011, 05:39:00 AM
QUOTE(JackintheXbox @ Feb 21 2011, 01:36 PM)
We are talking about Jungleflasher remember? Or do you think ima fanboy for Maximuses software?
Ok so why should JF support a "Standalone" product? And what software lool Just reams of addons is all I see.. In the current climate most people unlike you wont be throwing money at extra bits....
Post by: jacker300 on February 21, 2011, 06:31:00 AM
Post by: Geremia on February 21, 2011, 08:01:00 AM
QUOTE(OggyUK @ Feb 21 2011, 03:00 AM)
Thanks to Maximus & Co for the un-released original Concept.
Wow, another copypasted function added to JF, like dvdkey32, freekey, mtkflash, jungleusb...will you use another name for tarablinda or are you going with a usbpro-only slim function?
Do you accept suggestions? make 1 only panel for "copypasted functions", so you have more space for the sponsors and for the donate button.
scoprion hw have been reversed!! omg, 1 capacior, guessing how long it took for the jungleguys.
but, hey, you complain about the missing concept? It takes 5minutes (the lenght of the video) to guess it.
In case you need a few knowledge of what you copypaste, i would call it ram data retention trick
Post by: caster420 on February 21, 2011, 10:39:00 AM
Post by: 4DoorITR on February 21, 2011, 11:23:00 AM
Post by: Slacker17 on February 21, 2011, 02:25:00 PM
Post by: HybridKid on February 21, 2011, 02:37:00 PM
Post by: hyfall381 on February 21, 2011, 03:24:00 PM
if i make this PMT, can i still use my xecuter ck3 lite with it to do the liteon 9x drives? also, can the PMT still be used on the 7x liteon drives? or do i still need to use my regular ck3 probe for those?
anyone who can clear this up, id appreciate it. thanks!
Post by: letsmod on February 21, 2011, 04:31:00 PM
QUOTE
Intruder' date='Feb 21 2011, 03:57 AM' post='4781801']
How is it a dodge? They have stood on a stool and said its a STANDALONE which of course you pay for.....
How is it a dodge? They have stood on a stool and said its a STANDALONE which of course you pay for.....
Big negative, we have stated its has the option to be standalone, now where did Maximus say it will be complete standalone!
If your going to spread facts know the facts, stop spread untold truths.
Here is a Fact, Lizard has supported slim Drives from before release, it can fully read both slim lite-on keys just like any other product out there, it can fully Write slim 9xxxx just like any device out there.
Know 0225 is a different story on writing as it is hardware locked and C4E can verify that, which is why all you see out there is key read
Post by: DevilDave on February 21, 2011, 05:12:00 PM
QUOTE(hyfall381 @ Feb 21 2011, 11:24 PM)
sorry if this has been asked or if its just a stupid question
if i make this PMT, can i still use my xecuter ck3 lite with it to do the liteon 9x drives? also, can the PMT still be used on the 7x liteon drives? or do i still need to use my regular ck3 probe for those?
anyone who can clear this up, id appreciate it. thanks!
You can use PMT with any kind of phat liteon. 7x through 9x.
Post by: noobcube on February 21, 2011, 05:44:00 PM
QUOTE(queekus @ Feb 21 2011, 07:30 PM)
I Don't think this method does a FULL dump. I just spoofed my liteon as a benq, then i redumped it and JF identified it as a lieton.
If a box came to me that had a liteon that was spoofed as another drive (as has happened in the past) when i used this method to dump it will not tell me the drive was spoofed and then when i reflash it it magically wont work!
This happened 2 weeks ago, and with the old probe, (I used the CK3) Jungle flasher told me something was wrong by saying it was not a liteon drive (which clearly it was) I was suspicious and did a full MRA dump and VIOLA it was spoofed as a benq. (SO GLAD I DID THAT!)
I could then grab a working Benq drive and mod that with the key instead.
With this new probe, it did NOT tell me the drive was spoofed. Its not a true full dump, , , , ,
Just sayin JF should indicate that there was spoofing involved if there was, , , , , or maybe anytime I'm updating a liteon I should ALWAYS do a full MRA dump. (PAIN in the BUTT!!)
Of course it's not a full dump. And Jungle Flasher does indicate if the drive is spoofed or not, you don't need a complete firmware dump.
Post by: queekus on February 21, 2011, 05:54:00 PM
QUOTE(noobcube @ Feb 21 2011, 06:44 PM)
Of course it's not a full dump. And Jungle Flasher does indicate if the drive is spoofed or not, you don't need a complete firmware dump.
Well the PDF instructions, does say "it allows you to dump all lite-ons", it does not specify its just a key extraction. But Jungle Flasher does in fact NOT tell you the drive is spoofed using this method.
I just verified that, , ,
Post by: ruciz on February 21, 2011, 07:07:00 PM
We just need a way to read the DVD info before modding, see what its reporting as not what it truly is. JF should be able to grab this info on power up. This isn't a problem with LT firmwares either, as they don't spoof.
Post by: noobcube on February 21, 2011, 08:27:00 PM
QUOTE(queekus @ Feb 21 2011, 07:54 PM)
Well the PDF instructions, does say "it allows you to dump all lite-ons", it does not specify its just a key extraction. But Jungle Flasher does in fact NOT tell you the drive is spoofed using this method.
I just verified that, , ,
Yeah you're right :$
I don't really work with much spoofed drives; I remembered it showing the spoofed drive.
I don't see why they can't add a feature to check if the drive is spoofed and if so as what other drive.
Post by: pytec on February 21, 2011, 10:23:00 PM
Post by: purpledrank on February 21, 2011, 10:56:00 PM
QUOTE(pytec @ Feb 22 2011, 06:23 AM)
After reading the guide for PMT probe and key extraction, I actually think cutting the traces is an easier and more reliable method. Its nice that there is another option and thanks to all those that put time and effort into this. But assuming you have at least some soldering skills (which is likely the case if you are building a DIY probe) I'd stick with the old MRA trace cut method.
Well it's an excellent DIY, for those of us who don't have the skills, we can just wait for the Probe III. I think the main point here is that keys can be dumped without the need for cutting and soldering traces. It's quicker and easier for the amateur who wants to mod their own system.
Post by: [Imported]Intruder on February 22, 2011, 12:59:00 AM
QUOTE(letsmod @ Feb 22 2011, 12:31 AM)
Big negative, we have stated its has the option to be standalone, now where did Maximus say it will be complete standalone!
If your going to spread facts know the facts, stop spread untold truths.
Here is a Fact, Lizard has supported slim Drives from before release, it can fully read both slim lite-on keys just like any other product out there, it can fully Write slim 9xxxx just like any device out there.
Know 0225 is a different story on writing as it is hardware locked and C4E can verify that, which is why all you see out there is key read
Wondering how long it would be before you chimed in.. and as usual going back on what was said....
Post by: Buzzcut on February 22, 2011, 02:01:00 AM
QUOTE(queekus @ Feb 22 2011, 12:30 AM)
With this new probe, it did NOT tell me the drive was spoofed.
Yeesh...neither did the old r707 probe. If a BenQ drive is showing up in JF as a Hitachi then maybe, just maybe it's spoofed.
Post by: LittleBH on February 22, 2011, 03:29:00 AM
QUOTE(queekus @ Feb 22 2011, 12:54 AM)
Well the PDF instructions, does say "it allows you to dump all lite-ons", it does not specify its just a key extraction. But Jungle Flasher does in fact NOT tell you the drive is spoofed using this method.
I just verified that, , ,
You didnt noticed it was a Liteon drive label but was showing as a benq?
And spoofing isnt supported with LT/LT+ !
Post by: Backwell on February 22, 2011, 10:32:00 AM
Post by: queekus on February 22, 2011, 05:56:00 PM
QUOTE(Buzzcut @ Feb 22 2011, 03:01 AM)
Yeesh...neither did the old r707 probe. If a BenQ drive is showing up in JF as a Hitachi then maybe, just maybe it's spoofed.
It did actually tell you that it was NOT a liteon drive. If you had a liteon drive (7x series) that was spoofed as another drive and you used to probe to dump it, it tells you that the drive is NOT a liteon. True it does not tell you what it was spoofed AS but it did give you a heads up that something was wrong, which was nice. Its at that point you do a full dump and see whats up.
again I REALIZE that you cant spoof a liteon drive and have it read games properly NOW but that was NOT the case a few months ago. I'm now getting folks bringing me all kinds of weird stuff, and a for JF to tell me that something is amiss with the liteon's that I'm dumping would be helpful, cuz if I dump a liteon that was previously spoofed as something else then reflash it as a liteon, well that would SUCK. I would have had no way of knowing it was previously spoofed, , ,
Just saying, , If someone brings me a "update" I'll be doing the old probe method or a full DUMP until Jungle Flasher give me a proper warning. Though everyone should know.
I do give THANKS everyone involved for this wonderful hack however it does work like a champ! :-)
Post by: Buzzcut on February 23, 2011, 10:57:00 AM
QUOTE(queekus @ Feb 23 2011, 12:56 AM)
cuz if I dump a liteon that was previously spoofed as something else then reflash it as a liteon, well that would SUCK. I would have had no way of knowing it was previously spoofed, , ,
I still don't understand the issue, why do you say there's no way of knowing? If the drive properties in JF are showing a different make to the physical drive in front of you then it's spoofed....if you've got a Liteon v7 that shows up as a BenQ in JF then flash it as a BenQ.
Post by: queekus on February 23, 2011, 02:40:00 PM
QUOTE(Buzzcut @ Feb 23 2011, 11:57 AM)
I still don't understand the issue, why do you say there's no way of knowing? If the drive properties in JF are showing a different make to the physical drive in front of you then it's spoofed....if you've got a Liteon v7 that shows up as a BenQ in JF then flash it as a BenQ.
So,
Take a Liteon 7x drive, and spoof it as a benQ drive.
Now do the PMT method key extraction on that spoofed liteone drive. It does NOT tell you that the drive was spoofed at all. It give no error messages or anythign and automatically loads up the 7x LT + firmware ready for you to flash.
Now do the same dump with the old Probe, it dumps the key then Gives you a error message saying its not a liteon drive. Now the old probe did not tell you what the drive was spoofed as either but it does tell you that something is wrong and its time to do a FULL MRA dump to find out exactly what it was spoofed as.
Post by: Buzzcut on February 03, 2020, 03:28:00 PM
Drive Properties will show it's a BenQ....there's your answer before you even do any probing.
Post by: queekus on February 23, 2011, 05:48:00 PM
QUOTE(Buzzcut @ Feb 23 2011, 04:28 PM)
OK...take that Liteon spoofed as a BenQ and connect it up to JF.
Drive Properties will show it's a BenQ....there's your answer before you even do any probing.
Kind of correct, mostly incorrect
After further testing, with multiple firmwares here is what I found JF reports:
IE 1.5 Liteon drive spoofed as benq - JF 1.79 Correctly Reports that the Drive Was spoofed!
LT 1.1 Liteon drive spoofed as benq - JF 1.79 Does NOT correctly report the drive as being spoofed. It goes as far as telling you that its a 7485 firmware and happily lets you flash it in an unspoofed state erasing the evidence that it was spoofed and what is was spoofed as.
LT Plus 1.1 Liteone Drive spoofed as a benq - JF 1.79 Does NOT correctly report the drive as being spoofed. It goes as far as telling you that its a 7485 firmware and happily lets you flash it in an unspoofed state erasing the evidence that it was spoofed and what is was spoofed as.
ORIGINAL Firmware Liteon drive spoofed as benq - JF 1.79 Does NOT correctly report the drive as being spoofed. It goes as far as telling you that its a 7485 firmware and happily lets you flash it in an unspoofed state erasing the evidence that it was spoofed and what is was spoofed as.
having people bring me LT 1.1 and original firmware drives that are spoofed and NOT having JF 1.79 report this correctly is a potential problem, but at least it does correctly report spoofing if the firmware was ie 1.5
Post by: LordArk.Marco on May 25, 2011, 06:31:00 AM
this program works great on a Samsung drive?
I've see this video on youtube:
Is necessary the tool with the blue light? What is it?
Thanks!
Post by: bigdaddy57 on September 12, 2011, 08:49:00 PM