Post by: Xbox-Scene on May 14, 2010, 04:34:00 PM
| Coolshrimp released a new version of Jtag Tool - an all-in-one GUI installer to create and put freeBOOT 0.032 on your jtag'able 360. Whats new/fixed: * Advanced Options * LPT Port Changer * Convert XBReboot To Original Nand * Repair Bad Nand * Port95 Installer * FreeBOOT Patch Selection Official Site: http://tech-modz.net Download: n/a (might contain copyrighted code) - if you use v1.60+, you should get a prompt to update next time you start the program. News-Source: gueux-forum.net |
Post by: modslave on May 14, 2010, 04:49:00 PM
Post by: guerriero di pace on May 14, 2010, 04:52:00 PM
bugfix?
Post by: dvbandit on May 14, 2010, 06:45:00 PM
System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Jtag Tool 1.71\Version.txt'.
File name: 'C:\Program Files\Jtag Tool 1.71\Version.txt'
seems to work fine though if just continue
Post by: modslave on May 15, 2010, 02:08:00 AM
QUOTE(dvbandit @ May 15 2010, 01:45 AM) 
hmms i seem to get an error on startup on 1.71
System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Jtag Tool 1.71\Version.txt'.
File name: 'C:\Program Files\Jtag Tool 1.71\Version.txt'
seems to work fine though if just continue
I have a txt file called "Version" which contains "1.71" and nothing else. See if you have that file in your Jtag Tool 1.71 folder and if not create it, worth a shot
Post by: royvedas on May 15, 2010, 05:20:00 AM
Can someone please help me?
Post by: royvedas on May 15, 2010, 06:05:00 AM
QUOTE(royvedas @ May 15 2010, 01:20 PM)
I need some help. I cannot get the program to run. I have XP and get an error code like this: "0xc0000135" the program could not initialize (roughly translated).
Can someone please help me?
Ahh I found out. I needed net framework.
Post by: ztinoezz on May 15, 2010, 11:33:00 AM
console not booting,flash back orriginal and all is ok...
Post by: federicozose on May 15, 2010, 02:13:00 PM
Post by: trent666 on May 15, 2010, 10:52:00 PM
any ideas
Post by: modslave on May 16, 2010, 02:25:00 PM
System.IO.FileNotFoundException: Could not find file 'bin\Mem\jasper 256.bin'.
File name: 'bin\Mem\jasper 256.bin'
But also tried EasyFreeboot and BestPig's Toolbox and no joy with this Jasper...time to give manual a go
This post has been edited by modslave: May 16 2010, 09:56 PM
Post by: DeathGrind on May 16, 2010, 05:57:00 PM
I have my original nand image and can get my CPU key from xell. I would like to use flash360 to flash freeboot from a usb hard drive, i just forgot how to use flash 360.
I take it I do all the steps in the help section of jtag tool v1.71, and after I have my freeboot image, I could use flash360 to write it to my xbox. I just need to know the steps to be taken after I get my freeboot image for use with flash360.
I've been putting this off for a while, but I would like to get this done. I just don't want to have to open my Xbox AGAIN.
Thanks
Post by: erak on May 16, 2010, 06:33:00 PM
Post by: krizalid on May 16, 2010, 09:05:00 PM
QUOTE(ztinoezz @ May 15 2010, 12:33 PM)
anyone having problems with installing xell for jaspers?
console not booting,flash back orriginal and all is ok...
I don't have a jasper to check this out, but i did notice that the xell images provided within are prebuilt and just 1 for jasper
He didn't bother to make one for Jaspers and another for JaspersBB.
Also, this app could save some space, instead of having 6mb extra where the 4 xell images are at.
You can just build your own Xell image using ibuild and donor files to the corresponding nand.
QUOTE
ibuild c XeLL -c [CONSOLE] -d data\ -b [1BLKEY] xellbig.bin
This will build a Xell file, but with the size of the full nand, than simply using nandpro:
QUOTE
nandpro xellbig.bin: -r2 xell_small.bin 0 50
del xellbing.bin
del xellbing.bin
This will save lots of space, trust me.
Post by: sniffinpoprocks on May 16, 2010, 10:49:00 PM
QUOTE(dvbandit @ May 15 2010, 02:45 AM)
hmms i seem to get an error on startup on 1.71
System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Jtag Tool 1.71\Version.txt'.
File name: 'C:\Program Files\Jtag Tool 1.71\Version.txt'
seems to work fine though if just continue
What OS was this with? I had same issue with win7 but no problem with XP.
Post by: modslave on May 17, 2010, 03:23:00 PM
QUOTE(DeathGrind @ May 17 2010, 12:57 AM) 
hey everyone was looking for some advice. Can I use this program to flash freeboot 0.032 without having to open my xbox?
I have my original nand image and can get my CPU key from xell. I would like to use flash360 to flash freeboot from a usb hard drive, i just forgot how to use flash 360.
I take it I do all the steps in the help section of jtag tool v1.71, and after I have my freeboot image, I could use flash360 to write it to my xbox. I just need to know the steps to be taken after I get my freeboot image for use with flash360.
I've been putting this off for a while, but I would like to get this done. I just don't want to have to open my Xbox AGAIN.
Thanks
1. Yes you can (IMG:style_emoticons/default/biggrin.gif)
2. If you have updated xell to xellous you don't even need flash360. Once you have built your freeboot image change the filename to "updflash" place on memory stick inserted to any 360 usb port, load xellous by hitting eject which will see the update and flash - done
Post by: dvbandit on May 17, 2010, 07:28:00 PM
QUOTE(sniffinpoprocks @ May 17 2010, 05:49 AM)
What OS was this with? I had same issue with win7 but no problem with XP.
Yeah it seems it`s a windows 7 issue,but program seems to run fine if just hit continue..i think anyhow???? only needed to use it once and was for a xenon...and no problems i can recall other than that..
Post by: DeathGrind on May 18, 2010, 03:02:00 AM
QUOTE(modslave @ May 17 2010, 02:23 PM)
1. Yes you can (IMG:style_emoticons/default/biggrin.gif)
2. If you have updated xell to xellous you don't even need flash360. Once you have built your freeboot image change the filename to "updflash" place on memory stick inserted to any 360 usb port, load xellous by hitting eject which will see the update and flash - done
thanks will try that out tomorrow afternoon.
Post by: majoridiot on May 18, 2010, 03:11:00 PM
QUOTE(federicozose @ May 15 2010, 03:13 PM)
i try to use the new option "conver XBR to original" but i cant find the "clean nand.bin" or the "tech-mods jtag tool page" in the help options say "select clean image.bin (get it from tech-mods jtag tool page) but i cant find it, any help will be apressiated, thanks, federico
they were finally posted today...
you can find them here: http://tech-modz.net/showthread.php?t=330
(you need to be a registered "premium" member to get to them, so it'll cost you at least $8us...)
Post by: xBang360x on May 20, 2010, 06:43:00 PM
One thing is my nand.bin 277 megs when made to freeboot.bin in freeboot toolbox came out to 67 megs....Is this normal???
Thanks