Post by: Xbox-Scene on December 04, 2009, 01:54:00 PM
Bad Block Remapper for full 16mb ZeroPaired nand image Posted by XanTium | December 4 15:54 EST | News Category: Xbox360 |
| Redline99 released a small tool to remap bad blocks in an XBReboot image to match with your NAND chip, this could solve issues some people had trying to make XBReboot work: Quote
Official Site: By Redline99 on XBH Download: here (untested) |
Post by: reddwarf on December 04, 2009, 02:22:00 PM
Post by: bamma on December 04, 2009, 03:30:00 PM
This hack seems to be getting easier and easier..
Not updated yet and not exploited yet
Another week and maybee we can do all this from disk.. wishfull thinking,I remember splintercell gamesave hack well.
I know this will never happen But at First we needed cygnosis now just the onboard nand will do..
What next?
Who cares what c4eva and thx do... this is what its all about
I'm hooked again, checkin this site at least a couple ov times a day.. Just like the good ole days (xbox1 - evox - xbmc)
Big thanks to all thats making this possible
Cheers Ben
Post by: fred444 on December 04, 2009, 03:45:00 PM
Not everybody has an exploitable kernel !
Post by: mace1337 on December 04, 2009, 03:56:00 PM
QUOTE(fred444 @ Dec 4 2009, 11:45 PM) 
c4evas work is still needed !
Not everybody has an exploitable kernel !
Why c4eva? He is a DVD hacker not kernel hacker.
Post by: utar on December 04, 2009, 04:52:00 PM
QUOTE(fred444 @ Dec 5 2009, 12:45 AM)
c4evas work is still needed !
Not everybody has an exploitable kernel !
Well buy the games instead of pirating them. The whole point of this to my mind is to be able to run homebrew easily and still play games on the same box.
Utar
Post by: modslave on December 04, 2009, 05:49:00 PM
QUOTE(utar @ Dec 4 2009, 11:52 PM)
Well buy the games instead of pirating them. The whole point of this to my mind is to be able to run homebrew easily and still play games on the same box.
Utar
Well said Utar & bamma, while whats left of the the "team" is bickering the rest of the scene is leaving them behind
Post by: tomgreen99200 on December 04, 2009, 06:23:00 PM
QUOTE(modslave @ Dec 5 2009, 01:49 AM)
Well said Utar & bamma, while whats left of the the "team" is bickering the rest of the scene is leaving them behind
This is true and its great to see the scene moving forward so fast but i'm not so sure this mod will be for everyone. One, its not noob friendly and two, i'm sure 90% of the people don't have exploitable consoles. I know i wish i had one
Post by: iwanttheagrocrag on December 06, 2009, 07:09:00 AM
Post by: SoloStyl on December 10, 2009, 10:04:00 AM
homebrew is awsome, still rocking the PSP2000 lol
Sure, playing Iso's on the 360 and decryption of owned Rockband DLC is cool, BUT it wouldn't be possible if there wasnt an interest in homebrew
JUST alone to be able to run MAME or any emulator is superb.
heck, who knows if overclocking the 360 CPU and GPU might happen because of homebrew
and a new way to eradicate RROD finally (fingers crossed lol)
Post by: blackwolf on December 13, 2009, 04:34:00 PM
Post by: under420dog on December 13, 2009, 05:28:00 PM
fred444,utar and SoloStyl your noobs for not sticking to the topic.....what's wrong with a thankyou?
Redline99 released a small tool to remap bad blocks in an XBReboot image to match with your NAND chip, this could solve issues some people had trying to make XBReboot work:
and once again thanks for releasing this Redline99 )RC5 forever...
This post has been edited by under420dog: Dec 14 2009, 01:33 AM
Post by: rastaman108037 on December 18, 2009, 08:08:00 PM
Will update on success/fail
Post by: under420dog on December 18, 2009, 08:29:00 PM
QUOTE(rastaman108037 @ Dec 18 2009, 09:08 PM)
I'm testing this right now. I have two bad blocks that, among 6 different reads, will not go away.
Will update on success/fail
good deal...be interesting to know this......
Post by: rastaman108037 on December 18, 2009, 09:36:00 PM
Well there you have it. I had three bad blocks and it remapped it. Thanks creator!
Post by: bobsupercow on December 19, 2009, 12:19:00 PM
Post by: DuggyUK on December 19, 2009, 06:03:00 PM
Post by: horror on December 24, 2009, 11:02:00 PM
Post by: horror on December 30, 2009, 06:59:00 PM
in bad block mover I get ------------ Found Block ID 0x0230 at offset 0x0107BE00
Are these supposed to be different numbers after each 0x230?
Post by: hazed69 on January 03, 2010, 08:27:00 AM
says "componet COMDLG32.OCX or one of its depencies not correctly
registerd: a file missing or invalid
?????
Post by: jayboy86 on January 09, 2010, 08:00:00 AM
any alternative downloads?
dont worry, found a guide to solve the problem
http://windowsxp.mvps.org/comdlg32.htm
This post has been edited by jayboy86: Jan 9 2010, 04:28 PM
Post by: junior2k8 on January 16, 2010, 06:48:00 AM
This post has been edited by junior2k8: Jan 16 2010, 02:50 PM
Post by: junior2k8 on January 16, 2010, 08:00:00 AM
this is as far as xell will boot using the 8955_1 (8955_3 never boots up to xell will just sit there with a black screen but does boots dashboard)
this pic is xell showing my fusesets and giving a dvd error
this pic is after all the frustration i flashed my original nand1.bin back to 360 shows i am back on 7xxx dash which tells me that i'm doing the right steps but for the life of me can not get this thing to boot past xell and can not get 8955_3 to boot to xell at all
Post by: junior2k8 on January 16, 2010, 08:41:00 PM
Post by: kiwimods on January 18, 2010, 09:52:00 PM
QUOTE(hazed69 @ Jan 4 2010, 04:27 AM)
im trying to use this tool but windows dont let me open it
says "componet COMDLG32.OCX or one of its depencies not correctly
registerd: a file missing or invalid
?????
you need to type COMDLG32.OCX into google and you will find the file, download it and instal to system32 folder then run it from start menu somehow, i found the tutorial here and the file actually,
http://windowsxp.mvps.org/comdlg32.htm
Post by: dokworm on February 06, 2010, 04:37:00 AM
QUOTE(junior2k8 @ Jan 16 2010, 02:48 PM) 
hey guys need some help here - tried all day yesterday to get this ish to work. first with xbreboot 8955_3 tried it many times tried patching my kv and raw config to the file tried just patching kv and i've also just programmed xbreboot rawkv and rawconfig individually but still a NO GO - It will boot my dashboard but never would it boot to xbr or xell for that matter - I checked dash board and it wrote fine as i was on dash 8955 so i went back to xbins and got the xbr_1 (btw i'm using a xenon mobo) wrote all 3 files individually (xbr.bin - kv.bin and config.bin ) booted it up and it worked - well partially it will still boot the dash board and also would boot xell but xell would freeze at the bottom (it says "Your cpu key is xxxxxx - and your dvd key is xxxxxxx - ) and would never go any further . I'm not a noob at all when it comes to stuff like this . All my connections are good i've checked my dumped bin file with flashtool no problems and i've also used bad block remapper - which says there are no errors in my backup dump but does find 1 bad block in xbr.bin (original) and remaps it but still nogo - also xell tells me i should try installing by cdrom . i have pics if needed I will post up. Right now i'm writting back my original nand1.bin to see if it puts me back on the 7xxx dash
Do you have anything plugged into any of thr usb ports?
Post by: MODMANMIKE on February 09, 2010, 07:53:00 AM
