Post by: Xbox-Scene on November 26, 2009, 05:52:00 PM
3 Tools to Help UnCripple Your Xbox360 HDD Posted by XanTium | November 26 19:52 EST | News Category: Xbox360 |
| A few tools have been released to help you uncripple your HDD after ban, so you don't have to do it all manually. * FindSecData v0.4 (by boby2pc) I wrote little program to extract secdata.bin and filetable of NAND dump. It uses patch latest secdata.bin method (not delete method). Changelog: * v0.11 Fixed regional settings problem. * v0.2 support for 256 MB and 512 MB NANDs implemented. * v0.3 Different NAND controller support * v0.4 - "ommit timestamp" parameter removed - this is now default - added parameter to show more recomendations - "recommandation" algoritm changed - support for gaps in filesystem table version Official Site: n/a, by boby2pc on xboxhacker.net Download: here * Secdata Scan v0.2 (by zouzzz) Secdata Scan is a small utility that will save you manually open your NAND dump to find the address to hex edit to restore the functionality of the hdd after a ban. Once you load your nand image in Secdata, it will show you the last secdata updated on your console and the real address of this bloc to use with with nandpro. Official Site: by zouzzz at gx-mod.com Download: here * 360 HDFR v1.03 (by SoulHeaven) (French) 360 Hard Disk Functinalities Restorer v1.03 will allow you to patch your nand automatically in order to restore the functionality to install games on your harddrive on a banned Xbox 360. Does the same as Secdata Scan but with more functionality: - Show you the real date of secdata update - Can generate a zero filled file from your nand image for nanpro - Can patch your nand for Cygnos v2 Note: does not work on 256/512MB NANDs yet. Official Site: by SoulHeaven at gx-mod.com Download: here |
Post by: Maverick0984 on November 26, 2009, 06:07:00 PM
1. Extract with NandPro
2. Run secdata.bin through 360 HDFR v1.03
3. Flash fixed secdata.bin with NandPro
4. *Dance*
Post by: skyliner99 on November 26, 2009, 06:08:00 PM
Post by: IamReptar on November 26, 2009, 06:12:00 PM
Post by: Maverick0984 on November 26, 2009, 06:15:00 PM
QUOTE(IamReptar @ Nov 26 2009, 07:12 PM) 
Yay! Now if only it didn't take ages
...The alternative is a 360 that can run trusted content without borking it.
Post by: LockmanSal on November 26, 2009, 07:22:00 PM
Post by: nomorgow on November 26, 2009, 07:24:00 PM
I havent installed my chip on my older, disconnected 360, to do XeLL, but im wondering if/when i get banned sometime after iXtreme LT comes out if i'd be able to swap the chip back and forth between my units.
Post by: DarkEvilKen on November 26, 2009, 07:54:00 PM
Now the next topic shall be......
FindSecData vs Secdata Scan vs 360 HDFR
Who will win?
Post by: skyliner99 on November 26, 2009, 08:49:00 PM
Post by: Ree1981 on November 26, 2009, 11:04:00 PM
This post has been edited by Ree1981: Nov 27 2009, 07:06 AM
Post by: amak1131 on November 26, 2009, 11:05:00 PM
Post by: Martinchris23 on November 27, 2009, 12:40:00 AM
Used this tool last night and can personally vouch for it
Post by: CHR1ZS on November 27, 2009, 02:46:00 AM
Post by: jackvolp on November 27, 2009, 05:17:00 AM
can someonehelp me please ? i've a dump of mu XBOX360 NAND, so, which tool of these 3 have i to use to uncriplig automatically my hdd, please ?
If i correctly understood, i can launch 360 HDFR v1.03 and automatically modify my dump, so next i can flash my NAND with the patched dump, is it correct ?
thanks & sorry from my english
Post by: anjelika on November 27, 2009, 05:41:00 AM
Thanks for the proggies;)
Post by: Martinchris23 on November 27, 2009, 06:45:00 AM
QUOTE(jackvolp @ Nov 27 2009, 12:17 PM)
Hello!
can someonehelp me please ? i've a dump of mu XBOX360 NAND, so, which tool of these 3 have i to use to uncriplig automatically my hdd, please ?
If i correctly understood, i can launch 360 HDFR v1.03 and automatically modify my dump, so next i can flash my NAND with the patched dump, is it correct ?
thanks & sorry from my english
Hi - I wrote a fairly simple guide here:
http://forums.xbox-s...o...231&st=165#
QUOTE(anjelika @ Nov 27 2009, 12:41 PM)
Does any of the utilities also show the last timestamp for secdata.bin as if this was modified after the ban date, changing it will not help anymore (will not regain the hdd functionality)?
Thanks for the proggies;)
360HDFR will list all revisions and dates for versions of secdata.bin on your NAND. you can just take the offset value from the date earlier than the ban. What I don't understand is why your secdata.bin was modified after the ban? If you modified it, surely you still have a backup of the NAND?
Post by: jackvolp on November 27, 2009, 08:51:00 AM
really really thanks! 
Post by: Martinchris23 on November 27, 2009, 09:10:00 AM
QUOTE(anjelika @ Nov 27 2009, 02:52 PM)
Secdata.bin pointer gets modified after the ban if you install a new update (e.g. from a Game DVD). In this situation you can't restore your HDD functionality as your NAND only keeps copy of two pointers from sectdata.bin (the actual pointer and one previous pointer). As the previous pointer will still contain the sectdata.bin with an unusable hdd service you will not be able to restore your hdd functionality.
Have you tried to delete all of them?
Post by: RRoD420 on November 27, 2009, 01:16:00 PM
Post by: johanmalan on November 27, 2009, 01:54:00 PM
love all of u
Post by: bidrug on November 27, 2009, 04:02:00 PM
I'm frequently playing in a friend's house, and have a memory with a complete profile, but when he wants to go to my console (for live) is impossible...
Post by: Martinchris23 on November 27, 2009, 04:16:00 PM
QUOTE(CLK @ Nov 27 2009, 08:00 PM)
I guess that deleting all of them will not work either way, didn't tried tho.
Have you tried? If you have a dump of your NAND you don't really have much to lose since you can always write them back.
QUOTE(RRoD420 @ Nov 27 2009, 08:16 PM)
Can you do this if you have the 84xx or 89xx update already?
Yes - it has nothing to do with dashboard version, doesn't require you to have an exploitable kernel and you don't need the CPU key.
QUOTE(crofty2 @ Nov 27 2009, 08:35 PM)
can this help transfer a 20gig drive to a 120gig drive using a PC?? thanks and sorry for idiocy.
No - do a search for HDDHackr
QUOTE(bidrug @ Nov 27 2009, 11:02 PM)
Could this possibly help to stop console corrupting gamer profiles?
I'm frequently playing in a friend's house, and have a memory with a complete profile, but when he wants to go to my console (for live) is impossible...
Depends - if both consoles are on XBL then it's probably too late to do anything about it. The corruption COULD be revokation but I would guess it was more of an accidental corruption.
If the suspect 360 hasn't been on XBL for a good while then it might be possible to downgrade the console and re-update to correct the 'corruption'. I've had to do it on two unbanned consoles so far and have successfully corrected this.
Post by: bidrug on November 27, 2009, 09:46:00 PM
QUOTE(Martinchris23 @ Nov 28 2009, 12:16 AM)
Depends - if both consoles are on XBL then it's probably too late to do anything about it. The corruption COULD be revokation but I would guess it was more of an accidental corruption.
If the suspect 360 hasn't been on XBL for a good while then it might be possible to downgrade the console and re-update to correct the 'corruption'. I've had to do it on two unbanned consoles so far and have successfully corrected this.
The console has been banned a year ago, but that guy has updated to lates firmware, so I don't think is gonna be possible, unless timing atack still works (xenon board 84XX)
My console doesn't have any reason to be flagged, no mod no that console (but in another one).
Post by: DemisesAngel on November 28, 2009, 12:45:00 AM
Post by: Martinchris23 on November 28, 2009, 03:53:00 AM
QUOTE(DemisesAngel @ Nov 28 2009, 07:45 AM)
Any idea why 360HDFR freezes when I open my nand.bin?
QUOTE(golteef @ Nov 28 2009, 08:59 AM)
I'm having the same issue. tried it with 2 different nand dumps.
Got all the wiring done no problem dump my nand now if only I understood all this hex stuff I'd be in business!
I saw these tools and was excited only to be kicked in the arse.
QUOTE
360 Hard Disk Functinalities Restorer v1.03 will allow you to patch your nand automatically in order to restore the functionality to install games on your harddrive on a banned Xbox 360.
Does the same as Secdata Scan but with more functionality:
- Show you the real date of secdata update
- Can generate a zero filled file from your nand image for nanpro
- Can patch your nand for Cygnos v2
Note: does not work on 256/512MB NANDs yet.
Does the same as Secdata Scan but with more functionality:
- Show you the real date of secdata update
- Can generate a zero filled file from your nand image for nanpro
- Can patch your nand for Cygnos v2
Note: does not work on 256/512MB NANDs yet.
Any chance you've got Jasper consoles?
Post by: badboy1234 on November 28, 2009, 05:31:00 AM
QUOTE(anjelika @ Nov 27 2009, 02:52 PM)
Secdata.bin pointer gets modified after the ban if you install a new update (e.g. from a Game DVD). In this situation you can't restore your HDD functionality as your NAND only keeps copy of two pointers from sectdata.bin (the actual pointer and one previous pointer). As the previous pointer will still contain the sectdata.bin with an unusable hdd service you will not be able to restore your hdd functionality.
I've played MW2 and AC2 since the ban wave, on my 360...Would these games have overwritten my previous secdata.bin??
I dont want to go through the effort of soldering wires to my 360 and risk messing it up only to find out the secdata.bin has been overwritten (im still a bit of an amateur at sodering)
Any ideas?
Post by: Martinchris23 on November 28, 2009, 10:00:00 AM
QUOTE(badboy1234 @ Nov 28 2009, 12:31 PM)
I've played MW2 and AC2 since the ban wave, on my 360...Would these games have overwritten my previous secdata.bin??
I dont want to go through the effort of soldering wires to my 360 and risk messing it up only to find out the secdata.bin has been overwritten (im still a bit of an amateur at sodering)
Any ideas?
Unless you had a prompt to update your console after the ban wave, you should be ok. If you're that unsure about soldering I would advise you re-think doing it yourself !
QUOTE(golteef @ Nov 28 2009, 10:59 AM)
It's an older Elite without the onboard memory, from may 08' from what I read only the arcades have the onboard 256/512mb but I don't know for sure. When I dumped it I selected the 16 and it took so I just assumed it was correct, but we all know what assuming gets ya
Jaspers weren't shipping until 2009 so it's gonna be a 16MB NAND.
What does Degraded say about your dump?
Post by: DemisesAngel on November 28, 2009, 10:18:00 AM
QUOTE
Degraded App:
CB Version 1940 LDV0
CD Version 8453
CE Version 1888
CF(0) Version 8507 LDV 14
CF(1) Version 8955 LDV 15
CB Version 1940 LDV0
CD Version 8453
CE Version 1888
CF(0) Version 8507 LDV 14
CF(1) Version 8955 LDV 15
I couldn't get HDFR to work, so I did it manually. I copied all instances that the secdata.bin occured in my Nand and found the latest offset. Divided it by 4200 and got 0x21a, which is also what SecDataScan got as well.
Opened the file through HW, selected all and replaced with Zero's. Renamed to NandZero.bin and flashed it to the offset 0x21A. Checked to see if it restored, nothing.
Edit: FindSecData App:
QUOTE
findsecdata.exe nand2.bin -rc 15
C:\X360 Nand Hack\FindSecDatav0.4>findsecdata.exe nand2.bin -rc 15
findsecdata v0.4 2009-11-26 by boby2pc
Controller version 1
Last filetable change: 0xE8
ECC change: 0xE8 Filetbl: 0x0275 Secdata: 0x0274 Timestamp: 33766001 2004-04-13
ECC change: 0xE7 Filetbl: 0x0273 Secdata: 0x0221 Timestamp: 33766001 2004-04-13
ECC change: 0xE6 Filetbl: 0x0220 Secdata: 0x021F Timestamp: 33766001 2004-04-13
ECC change: 0xE5 Filetbl: 0x021E Secdata: 0x021D Timestamp: 33766001 2004-04-13
ECC change: 0xE4 Filetbl: 0x021C Secdata: 0x021B Timestamp: 33766001 2004-04-13
ECC change: 0xE3 Filetbl: 0x021A Secdata: 0x0219 Timestamp: 3B669222 2009-11-06
ECC change: 0xE2 Filetbl: 0x0218 Secdata: 0x02FC Timestamp: 3B5CB90D 2009-10-27
ECC change: 0xDF Filetbl: 0x0307 Secdata: 0x02FC Timestamp: 3B5CB90D 2009-10-27
Checking secdata:
Searching for recommended
Extracting secdata:
secdata0274.bin
secdata0221.bin
secdata021F.bin
secdata021D.bin
secdata021B.bin
secdata0219.bin
secdata02FC.bin
secdata02FC.bin
Extracting filetables:
filetable0275.bin
filetable0273.bin
filetable0220.bin
filetable021E.bin
filetable021C.bin
filetable021A.bin
filetable0218.bin
filetable0307.bin
Creating patched filetables:
Patchedfiletable0275By0275.bin
Patchedfiletable0275By0273.bin
Patchedfiletable0275By0220.bin
Patchedfiletable0275By021E.bin
Patchedfiletable0275By021C.bin
Patchedfiletable0275By0218.bin
Patchedfiletable0275By0307.bin
Use:
nandpro.exe lpt: -W16 secdata02FC.bin 274 1
nandpro.exe lpt: -w16 Patchedfiletable0275By0218.bin 275 1
or
nandpro.exe lpt: -W16 secdata02FC.bin 274 1
nandpro.exe lpt: -w16 Patchedfiletable0275By0307.bin 275 1
Press ENTER
C:\X360 Nand Hack\FindSecDatav0.4>findsecdata.exe nand2.bin -rc 15
findsecdata v0.4 2009-11-26 by boby2pc
Controller version 1
Last filetable change: 0xE8
ECC change: 0xE8 Filetbl: 0x0275 Secdata: 0x0274 Timestamp: 33766001 2004-04-13
ECC change: 0xE7 Filetbl: 0x0273 Secdata: 0x0221 Timestamp: 33766001 2004-04-13
ECC change: 0xE6 Filetbl: 0x0220 Secdata: 0x021F Timestamp: 33766001 2004-04-13
ECC change: 0xE5 Filetbl: 0x021E Secdata: 0x021D Timestamp: 33766001 2004-04-13
ECC change: 0xE4 Filetbl: 0x021C Secdata: 0x021B Timestamp: 33766001 2004-04-13
ECC change: 0xE3 Filetbl: 0x021A Secdata: 0x0219 Timestamp: 3B669222 2009-11-06
ECC change: 0xE2 Filetbl: 0x0218 Secdata: 0x02FC Timestamp: 3B5CB90D 2009-10-27
ECC change: 0xDF Filetbl: 0x0307 Secdata: 0x02FC Timestamp: 3B5CB90D 2009-10-27
Checking secdata:
Searching for recommended
Extracting secdata:
secdata0274.bin
secdata0221.bin
secdata021F.bin
secdata021D.bin
secdata021B.bin
secdata0219.bin
secdata02FC.bin
secdata02FC.bin
Extracting filetables:
filetable0275.bin
filetable0273.bin
filetable0220.bin
filetable021E.bin
filetable021C.bin
filetable021A.bin
filetable0218.bin
filetable0307.bin
Creating patched filetables:
Patchedfiletable0275By0275.bin
Patchedfiletable0275By0273.bin
Patchedfiletable0275By0220.bin
Patchedfiletable0275By021E.bin
Patchedfiletable0275By021C.bin
Patchedfiletable0275By0218.bin
Patchedfiletable0275By0307.bin
Use:
nandpro.exe lpt: -W16 secdata02FC.bin 274 1
nandpro.exe lpt: -w16 Patchedfiletable0275By0218.bin 275 1
or
nandpro.exe lpt: -W16 secdata02FC.bin 274 1
nandpro.exe lpt: -w16 Patchedfiletable0275By0307.bin 275 1
Press ENTER
Is that right? It's telling me to use 274 which would still contain the ban-secdata.bin?
Edit 2: My nand dump
Post by: crofty2 on November 28, 2009, 01:35:00 PM
QUOTE(Martinchris23 @ Nov 28 2009, 01:16 AM)
No - do a search for HDDHackr
Thanks, is there any instructions to copy data from an official 20GB to an official 120GB via PC?
Post by: golteef on November 28, 2009, 02:50:00 PM
Post by: golteef on November 28, 2009, 04:20:00 PM
however, when I put the HDD on the unbanned console the profile shows corrupted even with a new one. so I have no friggin clue why that shows corrupt shouldn't it be fine if I can install to HDD?
Post by: golteef on November 28, 2009, 05:50:00 PM
QUOTE(golteef @ Nov 29 2009, 12:20 AM)
Well after hours of this and that I finally was able to restore HDD install function
however, when I put the HDD on the unbanned console the profile shows corrupted even with a new one. so I have no friggin clue why that shows corrupt shouldn't it be fine if I can install to HDD?n/m had to format hdd and all was good swap back n forth between banned and unbanned no corruption.
Post by: Redsquirrel on November 28, 2009, 06:15:00 PM
Post by: sas83 on November 29, 2009, 01:37:00 AM
1. Using 360HDFR try to open it...but that programm freeze.
2. Using SecDataScan open nand dump,do scaning...got something : "Max" Adress :3à3610 ,Max Value :3B6592EB , "Max" Adress / 0x4200 : 0xf5 .... now can someone explain what i need to do with that full dump of nand in HEXredactor? what blocks i need to full with "0"?? coz i need to change and that full damp and flash it using programmer back
Post by: drakul71 on November 29, 2009, 02:04:00 PM
After manually check all 60 instances in WinHex, I confirmed what appears to be the same time stamps. Here's the log:F:\DownloadFiles\xbox360\FindSecDatav0.4>FindSecData.exe banned.bin -rc 15
findsecdata v0.4 2009-11-26 by boby2pc
Controller version 1
Last filetable change: 0xFB
ECC change: 0xFB Filetbl: 0x013B Secdata: 0x013A Timestamp: 33766001 2004-04-13
ECC change: 0xFA Filetbl: 0x0139 Secdata: 0x0138 Timestamp: 33766001 2004-04-13
ECC change: 0xF9 Filetbl: 0x0137 Secdata: 0x0136 Timestamp: 33766001 2004-04-13
ECC change: 0xF8 Filetbl: 0x0135 Secdata: 0x0133 Timestamp: 33766001 2004-04-13
ECC change: 0xF7 Filetbl: 0x0132 Secdata: 0x0131 Timestamp: 33766001 2004-04-13
ECC change: 0xF6 Filetbl: 0x0130 Secdata: 0x012F Timestamp: 33766001 2004-04-13
ECC change: 0xF5 Filetbl: 0x012E Secdata: 0x012D Timestamp: 33766001 2004-04-13
ECC change: 0xF4 Filetbl: 0x012C Secdata: 0x012B Timestamp: 33766001 2004-04-13
ECC change: 0xF3 Filetbl: 0x012A Secdata: 0x0129 Timestamp: 33766001 2004-04-13
ECC change: 0xF2 Filetbl: 0x0128 Secdata: 0x0127 Timestamp: 33766001 2004-04-13
ECC change: 0xF1 Filetbl: 0x0126 Secdata: 0x0121 Timestamp: 33766001 2004-04-13
ECC change: 0xF0 Filetbl: 0x0114 Secdata: 0x0113 Timestamp: 33766001 2004-04-13
ECC change: 0xEF Filetbl: 0x0112 Secdata: 0x0111 Timestamp: 33766001 2004-04-13
ECC change: 0xEE Filetbl: 0x0110 Secdata: 0x010F Timestamp: 33766001 2004-04-13
ECC change: 0xED Filetbl: 0x010E Secdata: 0x010D Timestamp: 33766001 2004-04-13
ECC change: 0xEC Filetbl: 0x010C Secdata: 0x010B Timestamp: 33766001 2004-04-13
ECC change: 0xEB Filetbl: 0x010A Secdata: 0x0109 Timestamp: 33766001 2004-04-13
ECC change: 0xEA Filetbl: 0x0108 Secdata: 0x0107 Timestamp: 33766001 2004-04-13
ECC change: 0xE9 Filetbl: 0x0106 Secdata: 0x0105 Timestamp: 33766001 2004-04-13
ECC change: 0xE8 Filetbl: 0x0104 Secdata: 0x0103 Timestamp: 33766001 2004-04-13
ECC change: 0xE7 Filetbl: 0x0101 Secdata: 0x0100 Timestamp: 33766001 2004-04-13
ECC change: 0xE6 Filetbl: 0x00FF Secdata: 0x00FE Timestamp: 33766001 2004-04-13
ECC change: 0xE5 Filetbl: 0x00FD Secdata: 0x00FC Timestamp: 33766001 2004-04-13
ECC change: 0xE4 Filetbl: 0x00FB Secdata: 0x00FA Timestamp: 33766001 2004-04-13
ECC change: 0xE3 Filetbl: 0x00F9 Secdata: 0x00E6 Timestamp: 33766001 2004-04-13
ECC change: 0xE2 Filetbl: 0x00E5 Secdata: 0x00E4 Timestamp: 33766001 2004-04-13
ECC change: 0xE1 Filetbl: 0x00E3 Secdata: 0x00E2 Timestamp: 33766001 2004-04-13
ECC change: 0xE0 Filetbl: 0x00E1 Secdata: 0x00E0 Timestamp: 33766001 2004-04-13
ECC change: 0xDF Filetbl: 0x00DF Secdata: 0x00DE Timestamp: 33766001 2004-04-13
ECC change: 0xDE Filetbl: 0x00DD Secdata: 0x00DC Timestamp: 33766001 2004-04-13
ECC change: 0xDD Filetbl: 0x00DB Secdata: 0x00DA Timestamp: 33766001 2004-04-13
ECC change: 0xDC Filetbl: 0x00D9 Secdata: 0x00D8 Timestamp: 33766001 2004-04-13
ECC change: 0xDB Filetbl: 0x00D7 Secdata: 0x00D6 Timestamp: 33766001 2004-04-13
ECC change: 0xDA Filetbl: 0x00D5 Secdata: 0x00D4 Timestamp: 33766001 2004-04-13
ECC change: 0xD9 Filetbl: 0x00D3 Secdata: 0x00D2 Timestamp: 33766001 2004-04-13
ECC change: 0xD8 Filetbl: 0x00D1 Secdata: 0x00D0 Timestamp: 33766001 2004-04-13
ECC change: 0xD7 Filetbl: 0x00CF Secdata: 0x008D Timestamp: 33766001 2004-04-13
ECC change: 0xD6 Filetbl: 0x008C Secdata: 0x008B Timestamp: 33766001 2004-04-13
ECC change: 0xD5 Filetbl: 0x008A Secdata: 0x0089 Timestamp: 33766001 2004-04-13
ECC change: 0xD4 Filetbl: 0x0088 Secdata: 0x0087 Timestamp: 33766001 2004-04-13
ECC change: 0xD3 Filetbl: 0x0086 Secdata: 0x0085 Timestamp: 33766001 2004-04-13
ECC change: 0xD2 Filetbl: 0x0084 Secdata: 0x0083 Timestamp: 33766001 2004-04-13
ECC change: 0xD1 Filetbl: 0x0082 Secdata: 0x0182 Timestamp: 33766001 2004-04-13
ECC change: 0xD0 Filetbl: 0x0181 Secdata: 0x0180 Timestamp: 33766001 2004-04-13
ECC change: 0xCF Filetbl: 0x017F Secdata: 0x017E Timestamp: 33766001 2004-04-13
ECC change: 0xCE Filetbl: 0x017D Secdata: 0x017C Timestamp: 33766001 2004-04-13
ECC change: 0xCD Filetbl: 0x017A Secdata: 0x0179 Timestamp: 33766001 2004-04-13
ECC change: 0xCC Filetbl: 0x0178 Secdata: 0x0176 Timestamp: 33766001 2004-04-13
ECC change: 0xCB Filetbl: 0x0175 Secdata: 0x0174 Timestamp: 33766001 2004-04-13
ECC change: 0xCA Filetbl: 0x0167 Secdata: 0x015E Timestamp: 33766001 2004-04-13
ECC change: 0xC9 Filetbl: 0x015D Secdata: 0x015C Timestamp: 33766001 2004-04-13
ECC change: 0xC8 Filetbl: 0x015B Secdata: 0x015A Timestamp: 33766001 2004-04-13
ECC change: 0xC7 Filetbl: 0x0159 Secdata: 0x0157 Timestamp: 33766001 2004-04-13
ECC change: 0xC6 Filetbl: 0x0156 Secdata: 0x0155 Timestamp: 33766001 2004-04-13
ECC change: 0xC4 Filetbl: 0x0151 Secdata: 0x0150 Timestamp: 33766001 2004-04-13
ECC change: 0xC3 Filetbl: 0x014F Secdata: 0x014E Timestamp: 33766001 2004-04-13
ECC change: 0xC2 Filetbl: 0x014D Secdata: 0x014C Timestamp: 33766001 2004-04-13
ECC change: 0xC1 Filetbl: 0x014B Secdata: 0x014A Timestamp: 33766001 2004-04-13
ECC change: 0xC0 Filetbl: 0x0147 Secdata: 0x0146 Timestamp: 33766001 2004-04-13
ECC change: 0xBF Filetbl: 0x0145 Secdata: 0x0144 Timestamp: 33766001 2004-04-13
ECC change: 0xBE Filetbl: 0x0143 Secdata: 0x0142 Timestamp: 33766001 2004-04-13
..and so forth
Looks like they're all dated 33766001
And finally:
Use:
Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.
I know I'm screwed. I was fiddling with the unit while trying to flash a dvd drive last week after the ban and I'm guessing it kept writing the bad data each time I powered up the Xbox without a DVD sata attached. Does this make sense? Is their any possible recourse around this?
Post by: visionzwp21 on November 29, 2009, 10:47:00 PM
PM me
Post by: Setesh on December 01, 2009, 08:10:00 AM
Fired up the 360 and put my 120gb hdd on from my unmodded console, put it back in the unmodded console and its corrupted. any idea whats gone wrong/ how to fix?
cheers
Post by: Setesh on December 01, 2009, 10:09:00 PM
QUOTE(Setesh @ Dec 1 2009, 04:10 PM)
Hey guys i dumped my nand 3 times with a 16mb jasper, both had a 250 error but seemed fine, i opened the nand with 360HDFR and did the zero fill and saved the Secdata patch file, and then wrote the patch file with the correct offset back to the 360.
Fired up the 360 and put my 120gb hdd on from my unmodded console, put it back in the unmodded console and its corrupted. any idea whats gone wrong/ how to fix?
cheers
Nevermind i fixed it, had to use FindSecData 0.5 and that worked wonders. excellent! niiice!
Post by: rubaff on December 03, 2009, 11:57:00 AM
CODE
Open up NANDPRO again, and this time, enter:
NandPro lpt:-w16 nandzero.bin 0x0119 1
NandPro lpt:-w16 nandzero.bin 0x0119 1
Or does HDFR tell me, which command-prompt to use, to write the NAND back to the console?
Thanks!
Post by: Odb718 on December 04, 2009, 05:02:00 AM
Every time I put the 16MB nand in it my pc bogs down and the program stops responding.
What's up with devs making tools and putting little in the readme or not even having one to start with??
Post by: insanity4all on December 11, 2009, 09:17:00 PM
QUOTE(rubaff @ Dec 4 2009, 08:44 AM)
Can't somebody tell, who already used the tool?
Use Nandpro to dump the nand
use Secdata Scan v0.2 to locate the secdata.bin (s) in the dump, it will display the address blocks where the bins are for you to use with nandpro to write to 0's
The "Max" address / 0x4200 display is the address you use with nandpro
Then you use nandpro and actually do it.
Then redump the nand, name it something like nandcheck.bin and run that through Secdata. You should notice that the block address you wrote to is different in the nandceck.bin than it was in your nand.bin
Then you know you're good to go and power it up with the HD to check.
(Yes you can leave the wires attatched to the motherboard while you check, but make sure you disconnect the circuit from your PC, or things may go ::poof::
)EDIT: Don't forget about Degraded! to verify your dumps are good, and you may need to use winhex to change the date in the dump to be compatible with degraded.
Post by: Martinchris23 on December 12, 2009, 06:10:00 AM
QUOTE(Odb718 @ Dec 4 2009, 12:02 PM)
Is there a working version of 360 HDFR v1.03??
Every time I put the 16MB nand in it my pc bogs down and the program stops responding.
What's up with devs making tools and putting little in the readme or not even having one to start with??
If you have a Jasper, HDFR is going to freeze when you try and open it. Use FindSecData instead. It even gives you the command lines to enter back into nandpro.
Post by: Stripey_Horse on December 14, 2009, 07:24:00 AM
QUOTE(whopacha @ Dec 14 2009, 11:59 AM)
understanding:
After much Reading and confusion about the whole NAND reading/writing process and what it actually means to be crippled (funtionalities / profile and game save corruption)... im trying to piece things together from several sites and forum topics...initially i was under the impression that uncrippling would also uncorrupt my profile and gamesaves. (appear to be wrong in this aspect?)
steps i took:
built the lpt cable (LPT Cable Tut) (thx btw)
dumped nand with nandpro2.0b twice (no errors) then compared them (matched) = success.
used findsecdata
used nandpro to write the commands findsecdata told me to write.
questions:
NOW....
what is the easiest way to test if iam actually successful or not?
the NAND read took about 35 mins and when the write so fast in comparison, i assumed it hadnt worked.... but i guess its not re-writing the whole nand... just patching it right?
my HDD does not have enough room to copy a game to... but it does try to start copying(not enough room left error) (whilst my bro's crippled/banned xbox comes up with unable to copy error) Is this a sign that Iam successful?
moving the HDD to another xbox (currently not crippled or banned -but is modded and im not willing to risk plugging back into live yet, at least until ixtreme LT is released)[may be flagged for a ban already?] however shows that my profile is corrupt - along with just about all of my game saves. (also it asks me to update.. assuming it means update the dash... from the hdd?) should i let it? 8507->8955
imguessing nothing bad will come of that?
I found this tut: http://www.se7ensins...xbox-360-a.html
i am planning to attempt to un-corrupt my profile... but this does not appear to include game saves also?
I have a LOT of corrupt gamesaves...
Is there a one-stop program or method to uncorrupt my profile AND gamesavs all at once without having to manually do each save? (even though i dont even know how to do the saves yet... as the tut only really shows the profile)
also it mentions "This must be done each time hard drive is connected to a banned console. Its a bit of a pain but does make it so you can continue to get achievements on a banned console."
does this exclude a banned but uncrippled console?
I want to be able to switch my HDD between my banned(uncrippled) console and legit consoles(currently not LIVE- but will be in the near future) without corrupting profile/saves.... is this easily done?
sorry for the super long post...
this has all been covered in the UnCripple Thread... RTFM
Post by: whopacha on December 15, 2009, 02:29:00 AM
anyways,...
everything seems to be working now.... uncorrupted the profile..... and all the saves seem to be alright now also.
although im not connecting this modded/notbanned console to live yet.... it doesnt read discs properly (even after swapping dvd drives????) so it will become my ixtreme LT LIVE test xbox... see if it gets banned... when ixtreme lt is released.
Post by: marianxdq on December 22, 2009, 05:25:00 AM
Post by: bidrug on December 22, 2009, 08:09:00 PM
Well, is not really crippled at all, corrupts gamer profiles (don't know if gamesaves, as from what i've read they don't get corrupted but the profile which belongs to), but allows to install games...
This console was banned somewhere near the NXE launch, don't remember if it was already banned or if it was after the update.
A banned console that allows installing games but still corrupting gamer profiles.
secdata.bin must have been overwritten at least 3 times....
Can I still uncrippling GP corruption?
Post by: shaitanpt on January 12, 2010, 05:48:00 PM
So if i do this, i will be able to switch my crippled hdd between my banned xbox and the one i just bought, playing backups on the former and originals on the un-hacked new one, always using the same disc and keeping the same save games and achievements?
Thanks!
Post by: mousan on January 24, 2010, 03:17:00 AM
I heard that these updates erase the "safe" secdata with HDD functions & no findsecdata nor scansecdata can help
Post by: mousan on January 27, 2010, 01:06:00 AM
Post by: azzykaii on January 30, 2010, 05:55:00 AM
Can somebody tell me exactly what to do or atleast tell me of a tutorial video for uncrippling the hdd...
if possible could someone make the tutorial themself because I really want to do this but don't know where to start and what to do ?