Post by: Xbox-Scene on October 30, 2009, 10:20:00 PM
| A new version of JungleFlasher(info) has been released. What's new/fixed: * iXtreme 1.61 support * 1 minor bug * other work was planned but leak of 1.61 prompted this quick fix Official Site: http://jungleflasher.net Download: here |
Post by: zerotekxp on October 30, 2009, 10:27:00 PM
Post by: tomgreen99200 on October 30, 2009, 11:31:00 PM
Post by: thugnasty101 on October 30, 2009, 11:37:00 PM
Post by: tomgreen99200 on October 31, 2009, 12:10:00 AM
This post has been edited by tomgreen99200: Oct 31 2009, 07:13 AM
Post by: damonnomad on October 31, 2009, 12:51:00 AM
So the sammy and benq firms were leaked ?
Post by: Geen Rommel on October 31, 2009, 01:00:00 AM
Jungle Flasher V0.1.66 beta (50) = JungleFlasher.0.1.67.Beta.rar
Jungle Flasher V0.1.68 beta (49) = JungleFlasher.0.1.66.Beta.rar
Post by: ♠ace-of-spades♠ on October 31, 2009, 01:19:00 AM
QUOTE(zerotekxp @ Oct 30 2009, 11:27 PM) 
Does this work with Windows 7 64bit? I can't seem to get it to work right.
I doubt it. I think it has to do with the portio thing, in that its 32-bit only.
which sucks because I too have a Win7 64-bit pc.
With 64-bit becoming more mainstream, hopefully soon their will be a way to flash a 360, in windows, with a 64-bit computer.
Post by: americanv8 on October 31, 2009, 01:50:00 AM
QUOTE(♠ace-of-spades♠ @ Oct 31 2009, 07:19 AM)
I doubt it. I think it has to do with the portio thing, in that its 32-bit only.
which sucks because I too have a Win7 64-bit pc.
With 64-bit becoming more mainstream, hopefully soon their will be a way to flash a 360, in windows, with a 64-bit computer.
Dont hold your breath, the guys from Winford engineering were asked if they were working or had intentions on creating a 64Bit portio and the answer was a resounding no.
Post by: amak1131 on October 31, 2009, 02:25:00 AM
Post by: damonnomad on October 31, 2009, 03:37:00 AM
QUOTE(amak1131 @ Oct 31 2009, 04:25 PM)
Sorry, but ace-of-spades you are wrong. Jungleflasher runs fine under x64 Windows 7. PortIO (a seperate x86 driver) won't work, however.
So you can use Jungle Flasher to all your flashing needs under x64 Windows 7.
Stop being pedantic.
Post by: run187 on October 31, 2009, 04:26:00 AM
QUOTE(damonnomad @ Oct 31 2009, 09:37 AM)
So you can use Jungle Flasher to all your flashing needs under x64 Windows 7.
Stop being pedantic.
Post by: dragontm on October 31, 2009, 05:36:00 AM
Post by: SimianEtza on October 31, 2009, 05:50:00 AM
Post by: fayd on October 31, 2009, 08:23:00 AM
Post by: that360guy on October 31, 2009, 08:35:00 AM
Post by: noobcube on October 31, 2009, 09:01:00 AM
I already flashed my BenQ with iXtreme 1.61 using 1.66 too, and it works fine, not sure what the 'bug' that they fixed with it is - probably just the autoload.
Post by: bigt89 on October 31, 2009, 09:24:00 AM
Crash on Verifying the write.
Post by: mat1c on October 31, 2009, 09:30:00 AM
QUOTE(bigt89 @ Oct 31 2009, 04:24 PM)
It bricked my benq.
Crash on Verifying the write.
so use dosflash, erase bad firmware and flash stock/custom fw again..
Post by: bigt89 on October 31, 2009, 09:58:00 AM
QUOTE(mat1c @ Oct 31 2009, 04:30 PM)
so use dosflash, erase bad firmware and flash stock/custom fw again..
No it got bricked entirely.
Cant detect erase etc. tried for 5 hours to get it back alive.
Its really bricked.
Tried everything including iprep. no joy.
Post by: AWD Bus on October 31, 2009, 10:06:00 AM
Post by: bigt89 on October 31, 2009, 10:10:00 AM
QUOTE(AWD Bus @ Oct 31 2009, 05:06 PM)
As long as you still have the key your golden tho. Benqs are cheap on ebay.
I have the original firmware. the key is in there right.
( i ordered a new one already
)
Post by: ♠ace-of-spades♠ on October 31, 2009, 10:56:00 AM
QUOTE(amak1131 @ Oct 31 2009, 03:25 AM)
Sorry, but ace-of-spades you are wrong. Jungleflasher runs fine under x64 Windows 7. PortIO (a seperate x86 driver) won't work, however.
which makes me right, not wrong.
The point of the program jungle flasher is to flash 360's...and can it do it on a 64-bit pc, No.
So it doesn't work on 64-bit. I dont care if it loads, whoop-dee-frickin-doo.
If it can't do its job, it dosn't work.
Post by: Ranger72 on October 31, 2009, 11:19:00 AM
QUOTE(bigt89 @ Oct 31 2009, 11:58 AM)
No it got bricked entirely.
Cant detect erase etc. tried for 5 hours to get it back alive.
Its really bricked.
Tried everything including iprep. no joy.
I have seen so many benq, and liteons that people have claimed to be bricked and always able to bring it back in dos.
Post by: Rickets06 on October 31, 2009, 12:39:00 PM
I was under the impression that dosflash 64 was fine with windows 7 64 and i successfully flashed to 1.6 about a week ago, (FINALLY)
This post has been edited by Rickets06: Oct 31 2009, 07:39 PM
Post by: Martinchris23 on October 31, 2009, 01:42:00 PM
Post by: bigt89 on October 31, 2009, 02:32:00 PM
QUOTE(Martinchris23 @ Oct 31 2009, 08:42 PM) 
Unless you physically damage the hardware, it's extremely difficult to brick the Samsung, Benq or Lite-on drives. at worst, the drive will be without firmware (which is what you do when you erase it), so just click on Vendor Intro and power cycle the drive. If your PC is freezing when you switch on the drive, you've got conflicting drivers trying to take control within Windows.
Well i tried all that erase etc. it didnt work some guy helped me on irc trough all the steps and he also said it was bricked.
I guess i hit the 1 in a million "bad luck".
Post by: newboxflash on October 31, 2009, 02:47:00 PM
QUOTE(bigt89 @ Oct 31 2009, 08:32 PM)
Well i tried all that erase etc. it didnt work some guy helped me on irc trough all the steps and he also said it was bricked.
I guess i hit the 1 in a million "bad luck".
have you tried intro device and powering it on/off a few times ?? not just the once
i had a really stubun benq a few weeks back brand spanky and it would go into vendor mode till i did that
Post by: bigt89 on October 31, 2009, 02:52:00 PM
QUOTE(newboxflash @ Oct 31 2009, 09:47 PM)
have you tried intro device and powering it on/off a few times ?? not just the once
i had a really stubun benq a few weeks back brand spanky and it would go into vendor mode till i did that
Yep tried cycling power like 50 times. i gave up after working at it for like 5 hours.
I just ordered a new one that should be here soon.
( looking for a good tut on howto replace a benq with a benq)
Post by: KarlosB on October 31, 2009, 06:03:00 PM
QUOTE(bigt89 @ Oct 31 2009, 10:52 PM)
Yep tried cycling power like 50 times. i gave up after working at it for like 5 hours.
I just ordered a new one that should be here soon.
( looking for a good tut on howto replace a benq with a benq)
flash new benq with your old key in new firmware (1.61) - job done.
Post by: ibbi on October 31, 2009, 11:39:00 PM
Post by: TimberWolf5 on November 01, 2009, 07:04:00 AM
QUOTE(bigt89 @ Oct 31 2009, 09:52 PM)
Yep tried cycling power like 50 times. i gave up after working at it for like 5 hours.
I just ordered a new one that should be here soon.
( looking for a good tut on howto replace a benq with a benq)
It's very hard to brick a benq. I would try dosflash.
Post by: chitto on November 03, 2009, 02:03:00 PM
Post by: minooch on November 04, 2009, 04:51:00 AM
QUOTE(chitto @ Nov 4 2009, 08:03 AM)
iv been trying to install jungleflasher on vista and it is coming up application has generated an exception that could not be handled can anyone help
do you have .net 3.5 sp1 installed?