Post by: Alteza on January 31, 2013, 11:13:00 AM
I've been told this app is the best to extract isos from XBOX360 dvd game discs.
I tryed, and I keep getting an error in almost every option:
"Can't read alt pfi"
I don't know much of this, but Should I flash my dvd device or someting to be able to just read it?
Am I doing anything wrong?
If not, can you guys recomend me any other app?
Best regards.
Post by: Xbox-Scene on October 18, 2009, 04:14:00 AM
| Schtrom released a new version of Schtrom360Xtract(info), a tool that will allow you to easily dump Xbox/Xbox360 gamedata, extract/patch the Security Sectors, PFI and DMI and fully prepare the image for burning in 1 step. What's new/fixed: * support for iXtreme V1.6 * stealth check updated to work with wave 3 and wave 4 games, the wave type is now displayed * new Correct SS V1 option added in options dialog for XBOX360 discs. This option is deactivated by default, you need to enable it in the options dialog. If activated this option does correct the security sector at disc extraction, image extraction/injection and also during the stealth check. Pay attention that the stealth check will already fail if one challenge/response byte starting at offset 0x200 has a different value than the calculated ss V1. Keep in mind that this will only correct the security sector based on version 1. At the moment no ss version 2 games are out. But if MS is changing to ss V2 it is recommended to deactivate this option until an update of S360X is released. On iXtreme V1.6 firmware and XBOX360 backup disc extraction the Correct SS V1 option is always used no matter what is selected in the options dialog. This is because I haven't found a way until today to read the ss with C/R data from a XBOX360 backup disc on the new iXtreme V1.6 firmware. * defaut XBOX360 drive speeds changed for better error correction TS-H943A, VAD6038 and DG-16D2S set to 12x. During tests with the new iXtreme V1.6 it seems that scratched discs have less read errors with increased speeds on XBOX360 drives. * Send Custom CDB dialog buffer size field changed to support also hexadecimal values. The cdb cmd presets are now changed to hexadecimal values. Three new presets for LiteOn DG-16D2S iXtreme V1.6 fw added. * inquiry detection of retail XBOX360 drives added. This gives you the opportunity to test cdb cmds on retail drives if your atapi.sys is patched. The patching of atapi.sys has to be done by yourself. * fixed bug in directory listing for XDVDFS dialog on newer games like Damnation and Batman: Arkham Asylum, games can now be viewed and extracted correctly * stealth.ini updated Official Site: n/a, by Schtrom Download: here Full Readme: xbins.org |
Post by: logicwatch on October 18, 2009, 04:30:00 AM
Post by: K1LLERHORNET on October 18, 2009, 05:45:00 AM
Post by: joliverio on October 18, 2009, 07:06:00 AM
Many thanks for this app!
I have a question;
Which database this app uses to check the CRC? I am curious to know if it is the same as ABGX database or if it is from other sources
Post by: Eluder on October 18, 2009, 08:11:00 AM
Post by: jester on October 18, 2009, 04:59:00 PM
QUOTE(Eluder @ Oct 18 2009, 09:11 AM) 
I'm confused as to what the Correct SS V1 option does and whether or not it should be enabled.
QUOTE
- new Correct SS V1 option added in options dialog for XBOX360 discs
This option is deactivated by default, you need to enable it in the options dialog.
If activated this option does correct the security sector at disc extraction, image
extraction/injection and also during the stealth check. Pay attention that the stealth
check will already fail if one challenge/response byte starting at offset 0x200 has a
different value than the calculated ss V1. Keep in mind that this will only correct the
security sector based on version 1. At the moment no ss version 2 games are out. But
if MS is changing to ss V2 it is recommended to deactivate this option until an update
of S360X is released. On iXtreme V1.6 firmware and XBOX360 backup disc extraction the
Correct SS V1 option is always used no matter what is selected in the options dialog.
This is because I haven't found a way until today to read the ss with C/R data from a
XBOX360 backup disc on the new iXtreme V1.6 firmware.
This option is deactivated by default, you need to enable it in the options dialog.
If activated this option does correct the security sector at disc extraction, image
extraction/injection and also during the stealth check. Pay attention that the stealth
check will already fail if one challenge/response byte starting at offset 0x200 has a
different value than the calculated ss V1. Keep in mind that this will only correct the
security sector based on version 1. At the moment no ss version 2 games are out. But
if MS is changing to ss V2 it is recommended to deactivate this option until an update
of S360X is released. On iXtreme V1.6 firmware and XBOX360 backup disc extraction the
Correct SS V1 option is always used no matter what is selected in the options dialog.
This is because I haven't found a way until today to read the ss with C/R data from a
XBOX360 backup disc on the new iXtreme V1.6 firmware.
Post by: Eluder on October 18, 2009, 09:07:00 PM
Post by: drkoolbeanz on October 18, 2009, 09:22:00 PM
"a tool that will allow you to easily dump Xbox/Xbox360 gamedata, extract/patch the Security Sectors, PFI and DMI...."
This post has been edited by drkoolbeanz: Oct 19 2009, 04:26 AM
Post by: wulfie on October 18, 2009, 11:52:00 PM
QUOTE(drkoolbeanz @ Oct 18 2009, 11:22 PM)
So this is used by people that enjoy the jtag hack and don't want to update to the new dashboard that's in wave4 but still play the new games?
"a tool that will allow you to easily dump Xbox/Xbox360 gamedata, extract/patch the Security Sectors, PFI and DMI...."
no, it's used to rip 360 retail dvds and I still say that xbc is better, it supports wave4 just fine
Post by: Torb on March 25, 2010, 11:27:00 AM
Post by: jac38 on January 26, 2011, 08:02:00 AM
I tried several diffrent methods but is not successful. If I just place Disc 1 and Disc 2 in separate folders the xbox 360 just askes to put nr 2 in the disc drive and will not read it on the HDD. If I just use the program and place the second in the same folder as the first it reads it like it is only nr 2. I also used the "inject" option hoping it should put them together in a better working way but that didn't help either....
Anyone who can help in this matter?
Regards
jac38