Post by: Xbox-Scene on May 29, 2009, 08:15:00 PM
| >> A XBC Release intended to handle the new iXtreme 1.6 0800 mode firmwares Removed - Support for previous Xtreme ripping firmwares Removed - Stealth Check Buttons - Use agbx360 Changed - Stealth Check Report - PFI Wave X Date match removed Changed - Named check mark on options tab as "ISO Check" to reflect it is not a "Stealth Check" anymore Added - Ability to lock game partition before ripping Added - Ability to detect iXtreme firmware spoofing Added - Support for iXtreme 1.6 Samsung Added - Support for iXtreme 1.6 BenQ Added - Support for iXtreme 1.6 Liteon Added - Support for iXtreme 1.6 Hitachi (Note: Hitachi is untested and awaiting a firmware release) Due to an issue that affects the Liteon ix16 it is advised that you start XBC without a DVD in the drive. *** NOTE *** This build of XBC does not support older Xtreme ripping firmwares (Kreon drives are still supported though). Stealth Checking verbiage/intent removed, XBC only does limited checking. Use abgx360(info)(info) at http://abgx360.net for more thorough Stealth Checking Official Site: (n/a By Redline99) Download: here News-Source: xbins.org |
Post by: ibbi on May 30, 2009, 01:33:00 AM
Post by: MrX_Cuci on May 30, 2009, 03:01:00 AM
Does it support the Nero 9 burn engine? Everytime I use XBC (pre this version) for the first time I get coasters, but when I use Nero first and then XBC no coasters. I tried it on Vista and XP (no Nero or any other burning engine installed), same result. At first I thought my drive was f*cked, guess it isn't. Always worked fine before, guess some Windows hotfix screwed things up. I also tried the Imgburn combination same result.
This post has been edited by MrX_Cuci: May 30 2009, 10:06 AM
Post by: themashedavenger on May 30, 2009, 03:07:00 AM
QUOTE(ibbi @ May 30 2009, 05:33 PM) 
Does anyone know where I can find a good tutorial on how to use this?
yer i wanna tut do we need to put sumthing in that firmware folder?
Post by: DoomSayerSantos on May 30, 2009, 06:56:00 AM
How hard can it be.
Post by: stoatie_weasel on May 30, 2009, 10:52:00 AM
Needless to say tried I this on more than one original disk with same results.
This post has been edited by stoatie_weasel: May 30 2009, 06:02 PM
Post by: link375 on May 30, 2009, 06:58:00 PM
Post by: link375 on May 30, 2009, 08:34:00 PM
This post has been edited by link375: May 31 2009, 03:35 AM
Post by: jagogo on May 30, 2009, 09:19:00 PM
i have vista home premium 64bit.
Post by: cippy on May 31, 2009, 01:45:00 AM
QUOTE(stoatie_weasel @ May 31 2009, 01:52 AM)
Not having much success with XBC 2.9 and iX 1.6 0800(samsung). In SPTI mode drive is recognised but when complete backup is started it returns "Unable to determine current visable partition" "Read Failed". Tried the same with ASPI selected and get warning about already been unlocked, video will be filled with zero's but disc continues to rip. Stealth checked the resulting ISO failed only on the video partition.
Needless to say tried I this on more than one original disk with same results.
Needless to say tried I this on more than one original disk with same results.
I was having the same problem with my spare MS25 flashed with iX 1.6 0800. I have since installed the drivers posted in the link by link375 and was able to make a full backup successfully.
Give them a try if your still experiencing problems.Post by: stoatie_weasel on May 31, 2009, 07:48:00 AM
Post by: machinman on June 02, 2009, 12:55:00 AM
just wanting to know what I should define in the drive specific option, using recent liteon, bought early this year.
thanks.
Post by: JackDurshit on June 04, 2009, 05:56:00 PM
I've got one quick suggestion/ complaint and I am new to backing up games so if I haven't researched enough please kindly point me in the right direction. I'm currently backing up 4 Xbox1 games (GTA SA, GTA III, GTA VC, and Halo2) and I've come to the blantant resolution that ABGX360 does not verify these games, and the latest release of XBC does not include the stealth checker anymore. Is there an external program to check these backups or do I need to use let's say XBC 2.8 to verify these backups?
So my suggestion is this, use an ISO filter of some sort to isolate the Xbox1 ISO's from the 360 ISO's and only Xbox1 ISO's are capable of using the Stealth Checker in XBC. I don't know if it's possible, just my humble recommendation.
Thanks again for the great tool.
Post by: shummyr on June 05, 2009, 02:21:00 AM
Post by: lasoski311 on June 09, 2009, 09:03:00 PM
QUOTE
Action: Read DMI Sector
Sense Error: 5 / 30 / 02
UNKNOWN ERROR
CDB: READ DVD STRUCTURE
0XAD 00 00 00 00 00 00 04 08 04 00 00
Sense Error: 5 / 30 / 02
UNKNOWN ERROR
CDB: READ DVD STRUCTURE
0XAD 00 00 00 00 00 00 04 08 04 00 00
After i press 'ok' everything seems to working normally, is this message anything to worry about?
Post by: hfidek on June 10, 2009, 09:51:00 PM
when i try to burn a backup it give me an error
Disk Book Type: DVD+R DL
Image size 7.30 GB (7,835,492,352 bytes)
Setting Write Speed to: 2.4x (3,324 KB/s)
Write Speed set to: 2.4x (3,324 KB/s)
Setting layer 0 capacity at: 1913760 sectors
Reserving Track; Sectors: 3825923
Performing Optimum Power Calibration
Syncing Cache
Initialization complete
Starting write
Action: WriteSectors
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE
try 2 different game the godfather2 and fuel i did the godfather backup myself with a kreon drive
so far 4 coaster
any sugestion???
Post by: Nerdz on June 11, 2009, 04:44:00 PM
Disk Book Type: DVD+R DL
Image size 7.30 GB (7,838,695,424 bytes)
Setting Write Speed to: 2.4x (3,324 KB/s)
Write Speed set to: 2.4x (3,324 KB/s)
Setting layer 0 capacity at: 1913760 sectors
Reserving Track; Sectors: 3827487
Performing Optimum Power Calibration
Syncing Cache
Initialization complete
Starting write
Action: WriteSectors
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE
CDB: WRITE(10)
0x2A 00 00 1D 36 D0 00 00 10 00
Cancelled at LBA: 0x001D36D0 (1914576)
Syncing Cache
Closing Track
Finalizing Disk
Action: Close Disk
Sense Error: 5 / 72 / 04
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
CDB: CLOSE TRACK/SESSION
0x5B 01 05 00 00 00 00 00 00 00
Finalize Disk Failed
Getting media info [J]
Media Type: Not Present
Write failed
What is going on?
Post by: Nerdz on June 11, 2009, 07:25:00 PM
I never got problems with xbc 2.8 version, but the version 2.9 seems to be a problem.
Post by: Kloud on June 15, 2009, 06:57:00 PM
This post has been edited by Kloud: Jun 16 2009, 01:59 AM
Post by: 360repair on July 02, 2009, 07:22:00 PM
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
CDB: CLOSE TRACK/SESSION
0x5B 01 05 00 00 00 00 00 00 00
Finalize Disk Failed
Getting media info [J]
didnt have a problem with 2.8 though!
WTF have they done? it just give me a coaster, wasted a verbatim, im goin to have to go back to 2.8 and burn my game
Post by: DoomSayerSantos on July 04, 2009, 09:22:00 AM
In the middle of the game its only reading at 4.6x :/
Post by: Nerdz on July 10, 2009, 08:15:00 AM
QUOTE(Nerdz @ Jun 11 2009, 11:44 PM)
I also had a problem with this version when I tried to burn my HAWX backup. Take a look:
Disk Book Type: DVD+R DL
Image size 7.30 GB (7,838,695,424 bytes)
Setting Write Speed to: 2.4x (3,324 KB/s)
Write Speed set to: 2.4x (3,324 KB/s)
Setting layer 0 capacity at: 1913760 sectors
Reserving Track; Sectors: 3827487
Performing Optimum Power Calibration
Syncing Cache
Initialization complete
Starting write
Action: WriteSectors
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE
CDB: WRITE(10)
0x2A 00 00 1D 36 D0 00 00 10 00
Cancelled at LBA: 0x001D36D0 (1914576)
Syncing Cache
Closing Track
Finalizing Disk
Action: Close Disk
Sense Error: 5 / 72 / 04
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
CDB: CLOSE TRACK/SESSION
0x5B 01 05 00 00 00 00 00 00 00
Finalize Disk Failed
Getting media info [J]
Media Type: Not Present
Write failed
What is going on?
Any news?
Post by: Zee33 on August 24, 2009, 11:23:00 AM
under the misc tab of the program you need to do 2 things .
1) select your region
2) checkmark splitvid add it if it doesn't exist or is invalid
under the options tab
checkmark check for dvd data corruption if it isn't already checkmarked .
under the autofix automatically tab
change the autofix to level 3 .
save settings then click ok .
I then tested and ran ABGX 360 by hitting the launch button and all checked out . Even the XEX/SS verification and CRC . Then I actually burned the disc using Cookies XBox 360 Burner but am sure it will also work with imgburn as long as your settings are correct in it for writing to D/L .
My settings were wrong in abgx thats why I was getting the invalid write address . Thinkin it was cause of the vid not being split on the 2 layers . had nowhere to write to .
Hope this helps .
Post by: Murteira_Nabo on February 03, 2020, 04:24:00 PM
Post by: triplepf on October 16, 2009, 01:00:00 PM
Post by: DaSoP on October 24, 2009, 10:28:00 AM
Now with 2.9 90% of the burned discs keeps burning at... 0.3x!!!! Yeah I know! 5:50 (Yeap this is 5 hours 50 minutes) for a backup is way to much! The disc is playing ok but why is this happening?
Sometimes it is working like it should(very rarely though)!
Any hints?
P.S.:Checked in both my recorders Pionneer 112 and 116 into two different pcs just the same results! When I am using imageburn everything is fine! No nero or any other burning softare installed! The first pc has XP pro media center and the other Xp pro.
Post by: flameout on January 03, 2010, 03:04:00 AM
QUOTE(DoomSayerSantos @ May 30 2009, 01:56 PM)
Just select complete backup and press start.
How hard can it be.
The start doesn't light
Post by: neversour on November 03, 2010, 09:50:00 PM
QUOTE(link375 @ May 30 2009, 09:34 PM)
nvm I got it to work, just installed these drivers. http://www.versiontr...einfo/win/70822 and restarted, now im backing test drive
i have the same problem where the start button is greyed. all of these driver links don't get you to where you can download anything. finally i found one driver setup installation .exe file for this. i ran the file, restarted and still nothings working.
originally this worked and i was able to back up one of my games. now when i tried to do another one i have this problem where it won't let me start the rip. it recognizes the drive and disk in xbc but start is greyed out.
i've tried everything and really need some help with this issue. if the answer is installing these drivers then can you be a little more specific with where to download them and how to install them. thanks
-dom